sysAttributeSelect

When erasing or copying port config, user can select specific attribute to erase/copy.
If user enter zero-length string, 0x00 (all bits are not set) or 0xFF (all bits are set) 
indicates all attributes are selected, in this situation, system will perform erase/copy 
all configurations.
          
When erasing multiple ports from different interfaces, only check each interface with 
their attributes bit to perform config erasing, so does config copy.
          
Config erase example
	sysTarget = 201 (voip port 1)
	            301 (dsl port 1)
	sysAttributeSelect = # 0x00 0x00 0x00 0x00 0x00 0x80 (voip-alarm)
	In this case, system will erase all config setting of dsl port 1, 
	only remove voip alarm related setting from voip port 1.
          
Config copy example
	sysSource = 201 (voip port 1)
	sysTarget = 202 (voip port 2)
	sysAttributeSelect = # 0x20 (dsl-acl)
	In this case, system will copy all config from voip port 1 to port 2,
	ignoring dsl attribute setting.
          
Attribute List
dsl-loopguard(0)
dsl-alarm(1)
dsl-acl(2)
dsl-packet-filter(3)
dsl-smcast(4)
dsl-atm-vc(5)
dsl-vlan-transparent(6)
dsl-vlan-trunk(7)
dsl-vlan-translation(8)
dsl-vlan-tls(9)
dsl-qos(10)
dsl-igmp(11)
dsl-vdsl(12)
dsl-dhcp(13)
dsl-fdb(14)
dsl-dscp(15)
dsl-dot1x(16)
          
genni-acl(20)
genni-alarm(21)
genni-vlan-uplink(22)
genni-stp(23)
          
voip-alarm(40)
voip-h248(41)
voip-sip(42)
voip-dsp(43)
voip-pots(44)
          
system-acl(60)
system-alarm(61)
          
ex. # 0x00 0x10 = dsl-igmp(11)
    # 0x00 0x00 0x02 = genni-vlan-uplink(22)
    # 0x00 0x00 0x00 0x00 0x00 0x80 = voip-alarm(40)
    # 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x04 = system-alarm(61)
    # 0x00 0x00 0x00... = select all bits
    # 0xff 0xff 0xff... = select all bits

MIB

VES1724-58V-MIB

OID

.1.3.6.1.4.1.890.1.5.12.49.16.6.4

Type

scalar

Access

readwrite

Status

current

Parent

sysOps

Siblings

3