mltDetectedDtmfDigit
VES1724-58V-MIB ·
.1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.27
Object
column
OctetString
digit of DTMF tone detected.
Context
- MIB
- VES1724-58V-MIB
- OID
.1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.27- Type
- column
- Access
- readonly
- Status
- current
- Parent
- mltResultEntry
- Table
- mltResultTable
- Siblings
- 26
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-64
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mltVacTip AC voltage between TIP and GROUND.
[Special value]:
250000016 : No result.
250000032 : Test failed.
250000048 : 'Not Measured' reason # 1: Can't start the test when port is enable… | column | 0.1 rms SNMPv2-SMIInteger32 | .1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.1 |
| mltRtr Resistance between TIP and RING.
[Special value]:
250000016 : No result.
250000032 : Test failed.
250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabl… | column | 0.1 ohm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.10 |
| mltCtg Capacitance between TIP and GROUND.
[Special value]:
250000016 : No result.
250000032 : Test failed.
250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabl… | column | 10^-10 F SNMPv2-SMIInteger32 | .1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.11 |
| mltCrg Capacitance between RING and GROUND.
[Special value]:
250000016 : No result.
250000032 : Test failed.
250000048 : 'Not Measured' reason # 1: Can't start the test when port is enab… | column | 10^-10 F SNMPv2-SMIInteger32 | .1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.12 |
| mltCtr Capacitance between TIP and RING.
[Special value]:
250000016 : No result.
250000032 : Test failed.
250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled… | column | 10^-10 F SNMPv2-SMIInteger32 | .1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.13 |
| mltRen REN(ring equivalent number).
[Special value]:
250000016 : No result.
250000032 : Test failed.
250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled a… | column | 0.1 ren SNMPv2-SMIInteger32 | .1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.14 |
| mltVRing Ring voltage.
[Special value]:
250000016 : No result.
250000032 : Test failed.
250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and force not set.
… | column | 0.1 volt SNMPv2-SMIInteger32 | .1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.15 |
| mltVMetering Metering pulse voltage.
[Special value]:
250000016 : No result.
250000032 : Test failed.
250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and force… | column | 0.1 vpeak SNMPv2-SMIInteger32 | .1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.16 |
| mltDialToneDetected Whether dial tone is detected. | column | Enumeration | .1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.17 |
| mltDetectedDtmfCount Number of DTMF tone detected.
[Special value]:
250000016 : No result.
250000032 : Test failed.
250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.18 |
| mltDialToneDelay Dail tone delay between played out and detected.
[Special value]:
250000016 : No result.
250000032 : Test failed.
250000048 : 'Not Measured' reason # 1: Can't start the test when … | column | 0.001 sec SNMPv2-SMIInteger32 | .1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.19 |
| mltVacRing AC voltage between RING and GROUND.
[Special value]:
250000016 : No result.
250000032 : Test failed.
250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabl… | column | 0.1 rms SNMPv2-SMIInteger32 | .1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.2 |
| mltReceiverOffHook Receiver off-hook test.
[Normal Value]:
1 : On hook.
2 : Off hook.
3 : circuit short or fault.
4 : circuit open.
[Special value]:
25… | column | Enumeration | .1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.20 |
| mltLoopRload Loop resistance.
[Special value]:
250000016 : No result.
250000032 : Test failed.
250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and force not se… | column | 1 ohm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.21 |
| mltLoopIMetallic Metallic current.
[Special value]:
250000016 : No result.
250000032 : Test failed.
250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and force not s… | column | 10^-6 amp SNMPv2-SMIInteger32 | .1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.22 |
| mltLoopVAB Sensed AB voltage.
[Special value]:
250000016 : No result.
250000032 : Test failed.
250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and force not … | column | 0.001 volt SNMPv2-SMIInteger32 | .1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.23 |
| mltLoopVBL Low battery voltage.
[Special value]:
250000016 : No result.
250000032 : Test failed.
250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and force no… | column | 0.001 volt SNMPv2-SMIInteger32 | .1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.24 |
| mltLoopVBH High battery voltage.
[Special value]:
250000016 : No result.
250000032 : Test failed.
250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and force n… | column | 0.001 volt SNMPv2-SMIInteger32 | .1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.25 |
| mltRrev Reverse polarity Resistance.
[Special value]:
250000016 : No result.
250000032 : Test failed.
250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and … | column | 1 ohm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.26 |
| mltVacDiff AC voltage between TIP and RING.
[Special value]:
250000016 : No result.
250000032 : Test failed.
250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled … | column | 0.1 rms SNMPv2-SMIInteger32 | .1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.3 |
| mltVdcTip DC voltage between TIP and GROUND.
[Special value]:
250000016 : No result.
250000032 : Test failed.
250000048 : 'Not Measured' reason # 1: Can't start the test when port is enable… | column | 0.1 volt SNMPv2-SMIInteger32 | .1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.4 |
| mltVdcRing DC voltage between RING and GROUND.
[Special value]:
250000016 : No result.
250000032 : Test failed.
250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabl… | column | 0.1 volt SNMPv2-SMIInteger32 | .1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.5 |
| mltVdcDiff DC voltage between TIP and RING.
[Special value]:
250000016 : No result.
250000032 : Test failed.
250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled … | column | 0.1 volt SNMPv2-SMIInteger32 | .1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.6 |
| mltRLoop Loop Resistance.
[Special value]:
250000016 : No result.
250000032 : Test failed.
250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and force not se… | column | 0.1 ohm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.7 |
| mltRtg Resistance between TIP and GROUND.
[Special value]:
250000016 : No result.
250000032 : Test failed.
250000048 : 'Not Measured' reason # 1: Can't start the test when port is ena… | column | 0.1 ohm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.8 |
| mltRrg Resistance between RING and GROUND.
[Special value]:
250000016 : No result.
250000032 : Test failed.
250000048 : 'Not Measured' reason # 1: Can't start the test when port is en… | column | 0.1 ohm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.9 |