tunnelIfTOS
TUNNEL-MIB ·
.1.3.6.1.2.1.10.131.1.1.1.1.6
Object
column
r/w
Integer32
The method used to set the high 6 bits (the
differentiated services codepoint) of the IPv4 TOS or
IPv6 Traffic Class in the outer IP header. A value of
-1 indicates that the bits are copied from the
payload's header. A value of -2 indicates that a
traffic conditioner is invoked and more information
may be available in a traffic conditioner MIB module.
A value between 0 and 63 inclusive indicates that the
bit field is set to the indicated value.
Note: instead of the name tunnelIfTOS, a better name
would have been tunnelIfDSCPMethod, but the existing
name appeared in RFC 2667 and existing objects cannot
be renamed.
Context
- MIB
- TUNNEL-MIB
- OID
.1.3.6.1.2.1.10.131.1.1.1.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- tunnelIfEntry
- Table
- tunnelIfTable
- Siblings
- 10
Syntax
Integer32
Values & Constraints
Object Constraints
range: -2-63
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tunnelIfLocalAddress deprecated The address of the local endpoint of the tunnel
(i.e., the source address used in the outer IP
header), or 0.0.0.0 if unknown or if the tunnel is
over IPv6.
Since t… | column | SNMPv2-SMIIpAddress | .1.3.6.1.2.1.10.131.1.1.1.1.1 |
| tunnelIfRemoteInetAddress The address of the remote endpoint of the tunnel
(i.e., the destination address used in the outer IP
header). If the address is unknown or the tunnel is
not a point-to-point link… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.2.1.10.131.1.1.1.1.10 |
| tunnelIfEncapsLimit The maximum number of additional encapsulations
permitted for packets undergoing encapsulation at this
node. A value of -1 indicates that no limit is
present (except as a result … | column | Integer32 | .1.3.6.1.2.1.10.131.1.1.1.1.11 |
| tunnelIfRemoteAddress deprecated The address of the remote endpoint of the tunnel
(i.e., the destination address used in the outer IP
header), or 0.0.0.0 if unknown, or an IPv6 address, or
the tunn… | column | SNMPv2-SMIIpAddress | .1.3.6.1.2.1.10.131.1.1.1.1.2 |
| tunnelIfEncapsMethod The encapsulation method used by the tunnel. | column | IANAifType-MIBIANAtunnelType | .1.3.6.1.2.1.10.131.1.1.1.1.3 |
| tunnelIfHopLimit The IPv4 TTL or IPv6 Hop Limit to use in the outer IP
header. A value of 0 indicates that the value is
copied from the payload's header. | column | Integer32 | .1.3.6.1.2.1.10.131.1.1.1.1.4 |
| tunnelIfSecurity The method used by the tunnel to secure the outer IP
header. The value ipsec indicates that IPsec is used
between the tunnel endpoints for authentication or
encryption or both. … | column | Enumeration | .1.3.6.1.2.1.10.131.1.1.1.1.5 |
| tunnelIfFlowLabel The method used to set the IPv6 Flow Label value.
This object need not be present in rows where
tunnelIfAddressType indicates the tunnel is not over
IPv6. A value of -1 indicates… | column | IPV6-FLOW-LABEL-MIBIPv6FlowLabelOrAny | .1.3.6.1.2.1.10.131.1.1.1.1.7 |
| tunnelIfAddressType The type of address in the corresponding
tunnelIfLocalInetAddress and tunnelIfRemoteInetAddress
objects. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.2.1.10.131.1.1.1.1.8 |
| tunnelIfLocalInetAddress The address of the local endpoint of the tunnel
(i.e., the source address used in the outer IP
header). If the address is unknown, the value is
0.0.0.0 for IPv4 or… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.2.1.10.131.1.1.1.1.9 |