tunnelIfFlowLabel
TUNNEL-MIB ·
.1.3.6.1.2.1.10.131.1.1.1.1.7
Object
The method used to set the IPv6 Flow Label value. This object need not be present in rows where tunnelIfAddressType indicates the tunnel is not over IPv6. A value of -1 indicates that a traffic conditioner is invoked and more information may be available in a traffic conditioner MIB. Any other value indicates that the Flow Label field is set to the indicated value.
Context
- MIB
- TUNNEL-MIB
- OID
.1.3.6.1.2.1.10.131.1.1.1.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- tunnelIfEntry
- Table
- tunnelIfTable
- Siblings
- 10
Syntax
IPV6-FLOW-LABEL-MIBIPv6FlowLabelOrAny
- Source
- IPV6-FLOW-LABEL-MIBIPv6FlowLabelOrAny
- Base type
Integer32
Values & Constraints
Type Constraints
range: -1..1048575
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tunnelIfLocalAddress deprecated The address of the local endpoint of the tunnel
(i.e., the source address used in the outer IP
header), or 0.0.0.0 if unknown or if the tunnel is
over IPv6.
Since t… | column | SNMPv2-SMIIpAddress | .1.3.6.1.2.1.10.131.1.1.1.1.1 |
| tunnelIfRemoteInetAddress The address of the remote endpoint of the tunnel
(i.e., the destination address used in the outer IP
header). If the address is unknown or the tunnel is
not a point-to-point link… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.2.1.10.131.1.1.1.1.10 |
| tunnelIfEncapsLimit The maximum number of additional encapsulations
permitted for packets undergoing encapsulation at this
node. A value of -1 indicates that no limit is
present (except as a result … | column | Integer32 | .1.3.6.1.2.1.10.131.1.1.1.1.11 |
| tunnelIfRemoteAddress deprecated The address of the remote endpoint of the tunnel
(i.e., the destination address used in the outer IP
header), or 0.0.0.0 if unknown, or an IPv6 address, or
the tunn… | column | SNMPv2-SMIIpAddress | .1.3.6.1.2.1.10.131.1.1.1.1.2 |
| tunnelIfEncapsMethod The encapsulation method used by the tunnel. | column | IANAifType-MIBIANAtunnelType | .1.3.6.1.2.1.10.131.1.1.1.1.3 |
| tunnelIfHopLimit The IPv4 TTL or IPv6 Hop Limit to use in the outer IP
header. A value of 0 indicates that the value is
copied from the payload's header. | column | Integer32 | .1.3.6.1.2.1.10.131.1.1.1.1.4 |
| tunnelIfSecurity The method used by the tunnel to secure the outer IP
header. The value ipsec indicates that IPsec is used
between the tunnel endpoints for authentication or
encryption or both. … | column | Enumeration | .1.3.6.1.2.1.10.131.1.1.1.1.5 |
| tunnelIfTOS The method used to set the high 6 bits (the
differentiated services codepoint) of the IPv4 TOS or
IPv6 Traffic Class in the outer IP header. A value of
-1 indicate… | column | Integer32 | .1.3.6.1.2.1.10.131.1.1.1.1.6 |
| tunnelIfAddressType The type of address in the corresponding
tunnelIfLocalInetAddress and tunnelIfRemoteInetAddress
objects. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.2.1.10.131.1.1.1.1.8 |
| tunnelIfLocalInetAddress The address of the local endpoint of the tunnel
(i.e., the source address used in the outer IP
header). If the address is unknown, the value is
0.0.0.0 for IPv4 or… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.2.1.10.131.1.1.1.1.9 |