tnWtKeyApplicability
TROPIC-WAVEKEY-MIB ·
.1.3.6.1.4.1.7483.2.2.3.2.2.1.11.1.13
Object
column
Enumeration
Values include:
notApplicable - no wave keys configured
applicableAndAvailable - wave keys configured and
power is available
applicableAndUnavailable - wave keys configured
and power is unavailable
Reasons for a value of applicableAndUnavailable
include (but are not restricted to):
- The WSS Add Amplet is in a bad area (i.e., input
power too high or too low).
- There is a module failure.
Context
- MIB
- TROPIC-WAVEKEY-MIB
- OID
.1.3.6.1.4.1.7483.2.2.3.2.2.1.11.1.13- Type
- column
- Access
- readonly
- Status
- current
- Parent
- tnWtKeyEntry
- Table
- tnWtKeyTable
- Siblings
- 17
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | notApplicable |
2 | applicableAndAvailable |
3 | applicableAndUnavailable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tnDirection The signal direction. | column | Enumeration | .1.3.6.1.4.1.7483.2.2.3.2.2.1.11.1.1 |
| tnWtKeySynchronizePower Setting this attribute to a value of execute sets the
expected power equal to the present power. If the
present power is unavailable the set will be failed
back to the user. Whe… | column | TROPIC-TCTnCommand | .1.3.6.1.4.1.7483.2.2.3.2.2.1.11.1.10 |
| tnWtKeyTrailName The trail name of the encode point. | column | OctetString | .1.3.6.1.4.1.7483.2.2.3.2.2.1.11.1.11 |
| tnWtKeyStatus . | column | TROPIC-TCTnOchStatus | .1.3.6.1.4.1.7483.2.2.3.2.2.1.11.1.12 |
| tnWtKeyCidUnkeyed Indicates Unkeyed channel. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.2.2.3.2.2.1.11.1.14 |
| tnWtKeyCidChannelLoading . | column | Enumeration | .1.3.6.1.4.1.7483.2.2.3.2.2.1.11.1.15 |
| tnWtKeyExpectedPSDPower PSD target power with units mBm/GHz.
Internal Calculations:
PSD(dBm/GHz) = power (dBm) - 10 * log (width(GHz)). | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.2.3.2.2.1.11.1.16 |
| tnWtKeyPresentPSDPower PSD measured power with units mBm/GHz.
Internal Calculations:
PSD(dBm/GHz) = power (dBm) - 10 * log (width(GHz)). | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.2.3.2.2.1.11.1.17 |
| tnWtKeyCidCarrierChannelWidth Channel width. | column | MHz SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.2.3.2.2.1.11.1.18 |
| tnChannel The ITU channel. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.2.2.3.2.2.1.11.1.2 |
| tnWtKeyExpectedWK1 One of many possible Wave Keys expected to be riding
on a particular channel. A value of zero indicates
no Wave Key expected.
Current configurable range: 0 to 4096. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.2.2.3.2.2.1.11.1.3 |
| tnWtKeyExpectedWK2 One of many possible Wave Keys expected to be riding
on a particular channel. A value of zero indicates
no Wave Key expected.
Current configurable range: 0 to 4096. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.2.2.3.2.2.1.11.1.4 |
| tnWtKeyExpectedPower The power, expressed in units of mBm, is associated
with the expected Wave Keys. It is the average power
of the Wave Keys. Note that this attribute can be
changed by SCOT relati… | column | mBm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.2.3.2.2.1.11.1.5 |
| tnWtKeyExpectedPowerDev The allowed deviation of the expected power, expressed
in units of mB.
Current configurable range: 0 to 1000. | column | mB SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.2.2.3.2.2.1.11.1.6 |
| tnWtKeyPresentPower The power, expressed in units of mBm, associated with
the received Wave Keys. The value will be the average,
over the sampling interval, of the Wave Keys. | column | mBm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.2.3.2.2.1.11.1.7 |
| tnWtKeyReceived A indication that the two expected Wave Keys are
present on a particular channel. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.2.2.3.2.2.1.11.1.8 |
| tnWtKeyExpectedPowerTol The allowed tolerance of the expected power,
expressed in units of mB.
Current configurable range: 0 to 500. | column | mB SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.2.2.3.2.2.1.11.1.9 |