tnSwNodeControl

TROPIC-SOFTWARE-MIB · .1.3.6.1.4.1.7483.2.1.5.2.1.1.3

Object

scalar r/w TropicSwControl

Controls the software download.  Command details
are as follows:
          
******************************************************
load - will simply execute the script generated
       by audit, running only the load steps.  It
       must be preceded by an audit.  Load will
       not run an audit or delete the the audit
       script.  Cards are not loaded in parallel.
     - a set pdu including this attribute with
       this value may also include attribute
       tnSwNodeLastAuditTimeStamp.  If
       tnSwNodeLastAuditTimeStamp is included,
       and it differs from the value stored on
       the node, the load will fail.
          
upgradeAuto - upgradeAuto will perform an audit,
              load, and activate.  It will not
              commit the release.  It will fail
              if no upgrade path exists unless
              tnSwNodeUpgradeForce is specified.
            - a set pdu including this attribute
              with this value must also include
              attribute tnSwNodeWorkingReleaseDir;
              otherwise, the set will be failed
              back to the network operator.
            - a set pdu including this attribute
              with this value may also include
              attributes tnSwNodeUpgradeForce
              and/or tnSwNodeUpgradeNoBackup.
          
audit - generates the audit script but does not
        run it.
      - sets the value of attribute
        tnSwNodeUpgradePathAvailable.
      - a set pdu including this attribute with
        this value must also include attribute
        tnSwNodeWorkingReleaseDir; otherwise, the
        set will be failed back to the network
        operator.
      - a set pdu including this attribute with
        this value may also include attributes
        tnSwNodeUpgradeForce and/or
        tnSwNodeUpgradeNoBackup.
          
activate - only runs the previously generated
           audit script but does not perform any
           load steps that may be in the audit
           script. The load command must precede
           activate.
         - a set pdu including this attribute
           with this value may also include
           attribute tnSwNodeLastAuditTimeStamp.
           If tnSwNodeLastAuditTimeStamp is
           included, and it differs from the
           value stored on the node, the activate
           will fail.
          
commit - sets tnSwNodeCommittedRelease equal
         to tnSwNodeWorkingRelease, then clears
         tnSwNodeWorkingRelease.
       - clears tnSwNodeWorkingReleaseDir.
          
backout - only allowed if an upgrade has been
          attempted on the node.
          
autoIsu_load   - autoISU load.
          
auto_activate  - auto activate.
          
autoIsu_commit - autoIsu commit.
          
Sets on all other values are restricted.  A read
on this attribute returns a value of noCmd.
******************************************************

Context

MIB: TROPIC-SOFTWARE-MIB
OID: .1.3.6.1.4.1.7483.2.1.5.2.1.1.3
Type: scalar
Access: readwrite
Status: current
Parent: tnSoftwareNode
Siblings: 31

Syntax

TropicSwControl

Source: TropicSwControl
Base type: Enumeration

Values & Constraints

Type Values

`1`	noCmd
`2`	unknown
`3`	audit
`4`	activate
`5`	upgradeAuto
`6`	commit
`7`	backout
`8`	load
`9`	cardActivate
`10`	cardLoad
`11`	autoInstall
`12`	autoIsuLoad
`13`	autoActivate
`14`	autoIsuCommit

Related Objects

Sibling Objects

Object	Type	Syntax	OID
tnSwNodeLastControlOperation This is the last control command executed against the software download subsystem. If the last operation against the software download subsystem is not one of the valid operation…	scalar	TropicSwControl	`.1.3.6.1.4.1.7483.2.1.5.2.1.1.10`
tnSwNodeControlAbort This attribute allows the network operator to submit an abort on any operation executed via attribute tnSwNodeControl. It is only allowed if tnSwNodeLastControlOperationStatus is…	scalar	TROPIC-TCTnCommand	`.1.3.6.1.4.1.7483.2.1.5.2.1.1.11`
tnSwNodeLastControlOperationStatus This attribute indicates the status of the previously executed tnSwNodeControl operation.	scalar	TropicSwLastOperationStatus	`.1.3.6.1.4.1.7483.2.1.5.2.1.1.12`
tnSwNodeLastControlOperationResult The result of the previously executed tnSwNodeControl operation, whether or not it passed or failed.	scalar	TropicSwLastOperationResult	`.1.3.6.1.4.1.7483.2.1.5.2.1.1.13`
tnSwNodeLastControlOperationIntegerResult The result of the previously executed tnSwNodeControl operation, as an integer.	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.7483.2.1.5.2.1.1.14`
tnSwNodeLastControlOperationPercentCompleted The percent completion of the previously executed tnSwNodeControl operation. Only applies when tnSwNodeLastControlOperationStatus is inProgress. It should be 0 at all other times.	scalar	TropicSwLastOperationPercentCompleted	`.1.3.6.1.4.1.7483.2.1.5.2.1.1.15`
tnSwNodeLastAuditTimeStamp The time at which the last audit was executed, measured in total time ticks (seconds) from the year 1970. When setting tnSwNodeControl to install, tnSwNodeLastAuditTime…	scalar	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.7483.2.1.5.2.1.1.16`
tnSwNodeWorkingReleaseDir The directory associated with the software release to which the system is upgrading. For sets, if the directory starts with a forward slash, it is absolute; otherwise, it is rela…	scalar	OctetString	`.1.3.6.1.4.1.7483.2.1.5.2.1.1.18`
tnSwNodeActiveRelease The currently active software release.	scalar	OctetString	`.1.3.6.1.4.1.7483.2.1.5.2.1.1.19`
tnSwNodeReleaseRoot The path to the directory containing releases, relative to the TFTP server root directory. A forward slash will be prepended if it does not start with one.	scalar	OctetString	`.1.3.6.1.4.1.7483.2.1.5.2.1.1.2`
tnSwNodeSwdlServerProtocol This attributes indicates the software download protocol.	scalar	Enumeration	`.1.3.6.1.4.1.7483.2.1.5.2.1.1.20`
tnSwNodeSwdlServerIp The software download server where software files to be downloaded reside. This will be used as the primary source for files.	scalar	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.7483.2.1.5.2.1.1.21`
tnSwNodeSwdlServerUserId The userId used to access software download server.	scalar	OctetString	`.1.3.6.1.4.1.7483.2.1.5.2.1.1.22`
tnSwNodeSwdlServerPassword The password used to access software download server.	scalar	OctetString	`.1.3.6.1.4.1.7483.2.1.5.2.1.1.23`
tnSwNodePartialLoadCommand .	scalar	Enumeration	`.1.3.6.1.4.1.7483.2.1.5.2.1.1.25`
tnSwNodePartialLoadSupportedCardTypes The lc card types which image support by the node software release. Format like 11PDM12&112PDM11.	scalar	OctetString	`.1.3.6.1.4.1.7483.2.1.5.2.1.1.26`
tnSwNodePartialLoadImgInstalledCardTypes The lc card types which image have been installed on the node. Format like 11PDM12&112PDM11.	scalar	OctetString	`.1.3.6.1.4.1.7483.2.1.5.2.1.1.27`
tnSwNodePartialLoadImgToBeInstalledCardTypes The lc card types which image will need to install on the node. Format like 11PDM12&112PDM11. Only applies when tnSwNodePartialLoadCommand is partialLoad.	scalar	OctetString	`.1.3.6.1.4.1.7483.2.1.5.2.1.1.28`
tnSwNodePartialLoadActionResult The partial load result of the action.	scalar	TropicSwLastOperationResult	`.1.3.6.1.4.1.7483.2.1.5.2.1.1.29`
tnSwNodePartialLoadActionPercentCompleted The partial load percent completion of the action. It should be 0 at all other times.	scalar	TropicSwLastOperationPercentCompleted	`.1.3.6.1.4.1.7483.2.1.5.2.1.1.30`
tnSwNodeSwdlServerInetAddressType The value specifies the type of Internet address stored in tnSwNodeSwdlServerInetAddress.	scalar	INET-ADDRESS-MIBInetAddressType	`.1.3.6.1.4.1.7483.2.1.5.2.1.1.31`
tnSwNodeSwdlServerInetAddress Indicates the IPv6 address of the Software server.	scalar	INET-ADDRESS-MIBInetAddress	`.1.3.6.1.4.1.7483.2.1.5.2.1.1.32`
tnSwNodeControlStatus .	scalar	Enumeration	`.1.3.6.1.4.1.7483.2.1.5.2.1.1.33`
tnSwNodePort This attributes indicates the Software server port.	scalar	Unsigned32	`.1.3.6.1.4.1.7483.2.1.5.2.1.1.34`
tnSwNodeUrl .	scalar	OctetString	`.1.3.6.1.4.1.7483.2.1.5.2.1.1.35`
tnSwNodeLoadType .	scalar	Enumeration	`.1.3.6.1.4.1.7483.2.1.5.2.1.1.36`
tnSwNodeCommittedRelease The committed software release.	scalar	OctetString	`.1.3.6.1.4.1.7483.2.1.5.2.1.1.5`
tnSwNodeWorkingRelease The software release to which the system is upgrading. This is cleared following a commit to the release.	scalar	OctetString	`.1.3.6.1.4.1.7483.2.1.5.2.1.1.6`
tnSwNodeForce This attribute, when set to true, MAY result in the DB being purged (only if there is no upgrade path available). When this attribute is set to false, the DB will NOT be purged. …	scalar	Enumeration	`.1.3.6.1.4.1.7483.2.1.5.2.1.1.7`
tnSwNodeNoBackup This attribute, when set to true, a DB backup will not be required or enforced. When this attribute is set to false, a DB will backup will be required and enforced. All reads on…	scalar	Enumeration	`.1.3.6.1.4.1.7483.2.1.5.2.1.1.8`
tnSwNodeUpgradePathAvailable This object is set by the 1696R/1830 NE after the completion of an audit, either by setting tnSwNodeControl to audit or indirectly by setting tnSwNodeControl to upgradeAuto.	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.7483.2.1.5.2.1.1.9`