tnGmreOptLineImpLOSNR
TROPIC-ASON-MIB ·
.1.3.6.1.4.1.7483.2.1.9.2.11.2.1.7
Object
column
r/w
Unsigned32
GMRE OPTLINE Optical Signal-To-Noise (OSNR)
Power Ratio. The valid value is 0.00000 to
31622.77660 with precision of 5 decimal digits
for L Band.
Current configurable range: 0 to 3162277660.
Note: The OSNR value derived from the MIB value
(after dividing by 100000) is the linear inverse
of the real value in dB. To convert the MIB value
to a value in dB, use 10 * log(MIBvalue/100000),
e.g., 10 * log(100000000/100000 ) = 30 dB.
Context
- MIB
- TROPIC-ASON-MIB
- OID
.1.3.6.1.4.1.7483.2.1.9.2.11.2.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- tnGmreOptLineImpLEntry
- Table
- tnGmreOptLineImpLTable
- Siblings
- 11
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 0-3162277660
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tnGmreOptLineImpLIndex GMRE Optical Line Impairment table entry index.
Each index must identify a unique combination
of BitRate, Encoding, CompModule, and FecMode
for L Band.
Current conf… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.2.1.9.2.11.2.1.1 |
| tnGmreOptLineImpLRowStatus Row Status of Optical Line Impairment entry.
Supported values are active, createAndGo, and
destroy for L Band . | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.7483.2.1.9.2.11.2.1.10 |
| tnGmreOptLineImpLPower GMRE OPTLINE Power. The valid values are 0 to
40.50 milli-Watts and the default is 0.79
milli-Watt for L Band.
Current configurable range: 0 to 40500. | column | micro-Watts Unsigned32 | .1.3.6.1.4.1.7483.2.1.9.2.11.2.1.11 |
| tnGmreOptLineImpLPhaseEncode GMRE Optical Line phase encoding mode for L Band. | column | TnGmreOptLineImpPhaseEncode | .1.3.6.1.4.1.7483.2.1.9.2.11.2.1.12 |
| tnGmreOptLineImpLBitRate GMRE Optical Line transmitted signal bit rate for L Band. | column | Enumeration | .1.3.6.1.4.1.7483.2.1.9.2.11.2.1.2 |
| tnGmreOptLineImpLEncoding GMRE optical line encoding or modulation for L Band. | column | TnGmreOptLineImpEncoding | .1.3.6.1.4.1.7483.2.1.9.2.11.2.1.3 |
| tnGmreOptLineImpLCompModule GMRE Optical Line Compensation Module (on the OCH
transponder line side) for L Band. | column | TnGmreOptLineImpCompModule | .1.3.6.1.4.1.7483.2.1.9.2.11.2.1.4 |
| tnGmreOptLineImpLFecMode GMRE Optical Line Forward Error Correction (FEC)
mode for L Band. | column | TROPIC-TCAluWdmFecMode | .1.3.6.1.4.1.7483.2.1.9.2.11.2.1.5 |
| tnGmreOptLineImpLNLP GMRE OPTLINE Non-Linear Phase (NLP).
The valid value
is 0.00000 to 999.00000 with precision of 5
decimal digits.
Current configurable range: 0 to 99900000 for L Ban… | column | percentage Unsigned32 | .1.3.6.1.4.1.7483.2.1.9.2.11.2.1.6 |
| tnGmreOptLineImpLNLPNP GMRE OPTLINE Non-Linear Phase Negative-Positive
(NLPNP).
The valid value
is 0.00000 to 999.00000 with precision of 5
decimal digits for L Band.
Current configurable… | column | percentage Unsigned32 | .1.3.6.1.4.1.7483.2.1.9.2.11.2.1.8 |
| tnGmreOptLineImpLOSNRNP GMRE OPTLINE Optical Signal-To-Noise Negative-
Positive (OSNRNP) Power Ratio. The valid value
is 0.00000 to 31622.77660 with precision of 5
decimal digits for L Band.
… | column | Unsigned32 | .1.3.6.1.4.1.7483.2.1.9.2.11.2.1.9 |