tnAccessPortDirection
TROPIC-ACCESSPORT-MIB ·
.1.3.6.1.4.1.7483.2.2.4.1.2.1.1.9
Object
column
r/w
Enumeration
Access port direction. Setting the direction to unidirectionalRx will turn off the Tx laser, and suppress Tx alarms (including out Wavelength Tracker alarms). Setting the direction to unidirectionalTx will suppress Rx alarms (including in Wavelength Tracker alarms).
Context
- MIB
- TROPIC-ACCESSPORT-MIB
- OID
.1.3.6.1.4.1.7483.2.2.4.1.2.1.1.9- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- tnAccessPortEntry
- Table
- tnAccessPortTable
- Siblings
- 54
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | bidirectional |
2 | unidirectionalTx |
3 | unidirectionalRx |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tnAccessPortDescr Access port description. | column | OctetString | .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.1 |
| tnAccessPortAINS If the user has set Port AINS to true, the port
admin state is set to up by the system.
If the port admin state has been set up or down,
Port AINS is set to false b… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.10 |
| tnAccessPortAINSDebounceTime This attribute must be set in multiples of 60s.
It is equal to System AINS Debounce Time when
Port AINS Use System Default is true. Setting
the Port AINS Debounce Time and Port A… | column | seconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.11 |
| tnAccessPortUsingSysAINSDebounceTime Using System AINS Debounce Time. Sets with a
value of false are restricted. The network
operator must set Port AINS Debounce Time to
some valid value to disable the use of Syste… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.12 |
| tnAccessPortAINSDebounceTimeRemaining Number of seconds until the Port AINS DebounceTime
expires. If Port AINS is false or Port AINS
Debounce Time is 0, the value of this attribute
will be 0. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.13 |
| tnAccessPortIsDomainEdgePort For discriminating between ports that are internal
to a network composed of 1830 and 1696R network
elements and the ports that are at the edge of the
network so that the user know… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.14 |
| tnAccessPortFarEndAddressConnFrom Access port far end address that points to this
port. | column | OctetString | .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.15 |
| tnAccessPortFarEndIfIndexConnFrom Access port far end interface that points to
this port. | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.16 |
| tnAccessPortFarEndTypeConnFrom Access port far end type. | column | Enumeration | .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.17 |
| tnAccessPortExtAmpIpAddressIn The IP address of an external amplifier
connected to this port. This attribute is
applicable to the line port of an LD card
and is reserved for use with a RAMAN module. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.18 |
| tnAccessPortExtAmpIpAddressOut The IP address of an external amplifier
connected from this port. This attribute is
applicable to the line port of an LD card
and is reserved for use with an EDFA module. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.19 |
| tnAccessPortStatusLEDColor The color of the status LED. | column | TROPIC-TCTropicLEDColorType | .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.2 |
| tnAccessPortWtocmConnLoss The insertion loss between the LD card MON port
and the WTOCM input port.
Current configurable range: 0 to 1500. | column | mB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.20 |
| tnAccessPortWtocmConnAddress LD card port connected to WTOCM input port in
transmit direction. | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.21 |
| tnAccessPortOppDirectionPortAddress Address of opposite direction port when the TX
and RX directions are split between two ports. | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.22 |
| tnAccessPortIsValidInternalOTSXcEndpoint Indicates if this is an end point of internal
OT cross connect. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.23 |
| tnAccessPortWtDomainNumber The numbered domain used for WT key selection
for add XCs to this port; applies to external
line facing ports.
Current configurable range: -1 to 19. | column | Integer32 | .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.24 |
| tnAccessPortHasMpoConnector Indicates if the logical port underlies a
multi-fiber connector. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.25 |
| tnAccessPortMpoConnectorPortOutIfIndex Provides the shelf/slot/port of the multi-fiber
connector interface corresponding to this
logical port in the out direction. Value of 0
indicates no MPO port. | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.26 |
| tnAccessPortMpoConnectorPortInIfIndex Provides the shelf/slot/port of the multi-fiber
connector interface corresponding to this
logical port in the in direction. Value of 0
indicates no MPO port. | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.27 |
| tnAccessPortIsMpo Indicates if the port is itself a MPO port.
Retrievable through SNMP for all ports,
managed and MPO.
True: The port is the port for the MPO
connector.
False: The po… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.28 |
| tnAccessPortMonOcmConnAddress Port monitored by input or connected from output. | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.29 |
| tnAccessPortStatusLEDState The state of the status LED. | column | TROPIC-TCTropicLEDStateType | .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.3 |
| tnAccessPortAlmProfName . | column | OctetString | .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.30 |
| tnAccessPortmfcTemperature The Ambient temperature applies to the
sensor port of the MultiFunctional card. | column | Celsius SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.31 |
| tnAccessPortmfcNominalPressure The nominal pressure applies to the
sensor port of the MultiFunctional card. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.32 |
| tnAccessPortmfcDifferentialPressure The differential pressure applies to the
sensor port of the MultiFunctional card. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.33 |
| tnAccessFilterAmbientTemperature Current Ambient Temperature. | column | Celsius SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.34 |
| tnAccessFilterPressure Current Pressure Value. | column | Pa SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.35 |
| tnAccessFilterRecorded Recorded calibration on clean filter. | column | Pa SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.36 |
| tnAccessFilterCalibrated Recent filter calibration value. | column | Pa SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.37 |
| tnAccessFilterAltitude Altitude used in above calibration. | column | kilometers SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.38 |
| tnAccessFilterRecordTime Recorded calibration time. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.39 |
| tnAccessPortOperationalCapability . | column | TROPIC-TCTropicOperationalCapabilityType | .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.4 |
| tnAccessFilterCalibrateTime Recent calibration time. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.40 |
| tnAccessFilterScheduledTime Next scheduled time for calibration. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.41 |
| tnAccessPortL2FarEndIfIndex Access port Layer 2 far end interface index. | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.42 |
| tnAccessPortL2FarEndMacAddress Access port Layer 2 far end MAC address. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.43 |
| tnAccessPortDirectionCapability Access port direction capabilities. | column | Enumeration | .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.44 |
| tnAccessPortCpriMappingType Specifies the mapping type to map CPRI signals into
Ethernet packets.
tunneling - map CPRI 10B or 66B line codes
are encapsulted into RoE … | column | Enumeration | .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.45 |
| tnAccessPortFecType Specifies the Forward Error Correction type on the
interface port. Enter this keyword without option to
display the current value. fectype = rsfec is allowed
only for 25gbe, 100gb… | column | TROPIC-TCAluWdmFecMode | .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.46 |
| tnAccessPortFecBypassInd Parameter FecBypassInd (FEC Bypass Indication) determines
whether the corresponding option as defined in IEEE 802.3
is set or not.
If enabled, this implies:
- dHISER defect dete… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.47 |
| tnAccessPortCpriRole The master/slave role for CPRI interface. | column | Enumeration | .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.48 |
| tnAccessPortAseMode . | column | Enumeration | .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.49 |
| tnAccessPortStateQualifier . | column | TROPIC-TCTropicStateQualifierType | .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.5 |
| tnAccessPortRole . | column | Enumeration | .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.50 |
| tnAccessPortFacilityDescriptorName . | column | OctetString | .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.51 |
| tnAccessPortFacilityDescriptorDesc . | column | OctetString | .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.52 |
| tnAccessPortFacilityDescriptorCirId . | column | OctetString | .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.53 |
| tnAccessPortAlienWavebank . | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.54 |
| tnAccessPortModuleReset . | column | Enumeration | .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.55 |
| tnAccessPortFarEndAddress Access port far end address. | column | OctetString | .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.6 |
| tnAccessPortFarEndIfIndex Access port far end interface index. | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.7 |
| tnAccessPortFarEndType Access port far end type. | column | Enumeration | .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.8 |