tlpCoolingAlarmAmbientTemperatureSensorFault
TRIPPLITE-PRODUCTS ·
.1.3.6.1.4.1.850.1.3.3.7.38
Object
node
Ambient temperature sensor is in fault.
Context
- MIB
- TRIPPLITE-PRODUCTS
- OID
.1.3.6.1.4.1.850.1.3.3.7.38- Type
- node
- Status
- current
- Parent
- tlpCoolingAlarms
- Siblings
- 41
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tlpCoolingAlarmSupplyAirSensorFault The supply air sensor is in fault. | node | - | .1.3.6.1.4.1.850.1.3.3.7.1 |
| tlpCoolingAlarmInverterCommunicationsFault The inverter communications is in fault. | node | - | .1.3.6.1.4.1.850.1.3.3.7.10 |
| tlpCoolingAlarmRemoteShutdownViaInputContact A remote shutdown was triggerd by an input contact. | node | - | .1.3.6.1.4.1.850.1.3.3.7.11 |
| tlpCoolingAlarmCondensatePumpFault The condensate pump is in fault. | node | - | .1.3.6.1.4.1.850.1.3.3.7.12 |
| tlpCoolingAlarmLowRefrigerantStartupFault The low refrigerant startup is in fault. | node | - | .1.3.6.1.4.1.850.1.3.3.7.13 |
| tlpCoolingAlarmCondenserFanFault The condenser fan is in fault. | node | - | .1.3.6.1.4.1.850.1.3.3.7.14 |
| tlpCoolingAlarmCondenserFailure The condenser has failed. | node | - | .1.3.6.1.4.1.850.1.3.3.7.15 |
| tlpCoolingAlarmEvaporatorCoolingFailure The evaporator cooling is in fault. | node | - | .1.3.6.1.4.1.850.1.3.3.7.16 |
| tlpCoolingAlarmReturnAirTempHigh The return air temperature is high. | node | - | .1.3.6.1.4.1.850.1.3.3.7.17 |
| tlpCoolingAlarmSupplyAirTempHigh The supply air temperature is high. | node | - | .1.3.6.1.4.1.850.1.3.3.7.18 |
| tlpCoolingAlarmEvaporatorFailure The evaporator has failed. | node | - | .1.3.6.1.4.1.850.1.3.3.7.19 |
| tlpCoolingAlarmReturnAirSensorFault The return air sensor is in fault. | node | - | .1.3.6.1.4.1.850.1.3.3.7.2 |
| tlpCoolingAlarmEvaporatorFreezeUp The evaporator is frozen. | node | - | .1.3.6.1.4.1.850.1.3.3.7.20 |
| tlpCoolingAlarmDischargePressureHigh The discharge pressure is high. | node | - | .1.3.6.1.4.1.850.1.3.3.7.21 |
| tlpCoolingAlarmPressureGaugeFailure The pressure gauge has failed. | node | - | .1.3.6.1.4.1.850.1.3.3.7.22 |
| tlpCoolingAlarmDischargePressurePersistentHigh The discharge pressure is persistently high. | node | - | .1.3.6.1.4.1.850.1.3.3.7.23 |
| tlpCoolingAlarmSuctionPressureLowStartFailure Cannot start due to low suction pressure. | node | - | .1.3.6.1.4.1.850.1.3.3.7.24 |
| tlpCoolingAlarmSuctionPressureLow The suction pressure is low. | node | - | .1.3.6.1.4.1.850.1.3.3.7.25 |
| tlpCoolingAlarmSuctionPressurePersistentLow The suction pressure is persistently low. | node | - | .1.3.6.1.4.1.850.1.3.3.7.26 |
| tlpCoolingAlarmStartupLinePressureImbalance The startup line pressure is in imbalance. | node | - | .1.3.6.1.4.1.850.1.3.3.7.27 |
| tlpCoolingAlarmCompressorFailure The compressor has failed. | node | - | .1.3.6.1.4.1.850.1.3.3.7.28 |
| tlpCoolingAlarmCurrentLimit The current is out of range. | node | - | .1.3.6.1.4.1.850.1.3.3.7.29 |
| tlpCoolingAlarmCondenserInletAirSensorFault The condenser inlet air sensor is in fault. | node | - | .1.3.6.1.4.1.850.1.3.3.7.3 |
| tlpCoolingAlarmWaterLeak Water is leaking. | node | - | .1.3.6.1.4.1.850.1.3.3.7.30 |
| tlpCoolingAlarmFanUnderCurrent The fan is under current. | node | - | .1.3.6.1.4.1.850.1.3.3.7.31 |
| tlpCoolingAlarmFanOverCurrent The fan is over current. | node | - | .1.3.6.1.4.1.850.1.3.3.7.32 |
| tlpCoolingAlarmDischargePressureSensorFault The discharge pressure sensor is in fault. | node | - | .1.3.6.1.4.1.850.1.3.3.7.33 |
| tlpCoolingAlarmWaterFull Water is Full. | node | - | .1.3.6.1.4.1.850.1.3.3.7.34 |
| tlpCoolingAlarmAutoCoolingOn Automatic cooling was activated to lower the temperature below the
remote set point. | node | - | .1.3.6.1.4.1.850.1.3.3.7.35 |
| tlpCoolingAlarmPowerButtonPressed Power button was pressed on the front panel. | node | - | .1.3.6.1.4.1.850.1.3.3.7.36 |
| tlpCoolingAlarmDisconnectedFromDevice The device communications is disconnected. | node | - | .1.3.6.1.4.1.850.1.3.3.7.37 |
| tlpCoolingAlarmRemoteTemperatureSensorFault Remote temperature sensor is in fault. | node | - | .1.3.6.1.4.1.850.1.3.3.7.39 |
| tlpCoolingAlarmCondenserOutletAirSensorFault The condenser outlet air sensor is in fault. | node | - | .1.3.6.1.4.1.850.1.3.3.7.4 |
| tlpCoolingAlarmLowPressureSensorFault Low pressure sensor is in fault. | node | - | .1.3.6.1.4.1.850.1.3.3.7.40 |
| tlpCoolingAlarmHighPressureSensorFault High pressure sensor is in fault. | node | - | .1.3.6.1.4.1.850.1.3.3.7.41 |
| tlpCoolingAlarmSentrytimerTimeout Sentry timer time out. | node | - | .1.3.6.1.4.1.850.1.3.3.7.42 |
| tlpCoolingAlarmSuctionTemperatureSensorFault The suction temperature sensor is in fault. | node | - | .1.3.6.1.4.1.850.1.3.3.7.5 |
| tlpCoolingAlarmEvaporatorTemperatureSensorFault The evaporator temperature sensor is in fault. | node | - | .1.3.6.1.4.1.850.1.3.3.7.6 |
| tlpCoolingAlarmAirFilterClogged The air filter is clogged. | node | - | .1.3.6.1.4.1.850.1.3.3.7.7 |
| tlpCoolingAlarmAirFilterRunHoursViolation The air filter run hours was violated. | node | - | .1.3.6.1.4.1.850.1.3.3.7.8 |
| tlpCoolingAlarmSuctionPressureSensorFault The suction pressure sensor is in fault. | node | - | .1.3.6.1.4.1.850.1.3.3.7.9 |