tlUpsAlarmExternalNonSmartBatteryAgeAboveThreshold
TRIPPLITE-12X ·
.1.3.6.1.4.1.850.100.1.6.3.60
Object
node
One or more external non-smart batteries have been determined to require replacement.
Context
- MIB
- TRIPPLITE-12X
- OID
.1.3.6.1.4.1.850.100.1.6.3.60- Type
- node
- Status
- current
- Parent
- tlUpsWellKnownAlarms
- Siblings
- 63
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tlUpsAlarmPrimaryPowerOutage The primary power source is not present. | node | - | .1.3.6.1.4.1.850.100.1.6.3.1 |
| tlUpsAlarmLowBattery The remaining battery run-time is less than or equal
to upsConfigLowBattTime. | node | - | .1.3.6.1.4.1.850.100.1.6.3.10 |
| tlUpsAlarmDepletedBattery The UPS will be unable to sustain the present load
when and if the utility power is lost. | node | - | .1.3.6.1.4.1.850.100.1.6.3.11 |
| tlUpsAlarmTempBad A temperature is out of tolerance. | node | - | .1.3.6.1.4.1.850.100.1.6.3.12 |
| tlUpsAlarmInputBad An input condition is out of tolerance. | node | - | .1.3.6.1.4.1.850.100.1.6.3.13 |
| tlUpsAlarmOutputBad An output condition (other than OutputOverload) is
out of tolerance. | node | - | .1.3.6.1.4.1.850.100.1.6.3.14 |
| tlUpsAlarmOutputOverload The output load exceeds the UPS output capacity. | node | - | .1.3.6.1.4.1.850.100.1.6.3.15 |
| tlUpsAlarmOnBypass The Bypass is presently engaged on the UPS. | node | - | .1.3.6.1.4.1.850.100.1.6.3.16 |
| tlUpsAlarmBypassBad The Bypass is out of tolerance. | node | - | .1.3.6.1.4.1.850.100.1.6.3.17 |
| tlUpsAlarmOutputOffAsRequested The UPS has shutdown as requested, i.e., the output
is off. | node | - | .1.3.6.1.4.1.850.100.1.6.3.18 |
| tlUpsAlarmUpsOffAsRequested The entire UPS has shutdown as commanded. | node | - | .1.3.6.1.4.1.850.100.1.6.3.19 |
| tlUpsAlarmSecondaryPowerOutage The secondary power source is not present. | node | - | .1.3.6.1.4.1.850.100.1.6.3.2 |
| tlUpsAlarmChargerFailed An uncorrected problem has been detected within the
UPS charger subsystem. | node | - | .1.3.6.1.4.1.850.100.1.6.3.20 |
| tlUpsAlarmUpsOutputOff The output of the UPS is in the off state. | node | - | .1.3.6.1.4.1.850.100.1.6.3.21 |
| tlUpsAlarmUpsSystemOff The UPS system is in the off state. | node | - | .1.3.6.1.4.1.850.100.1.6.3.22 |
| tlUpsAlarmFanFailure The failure of one or more fans in the UPS has been
detected. | node | - | .1.3.6.1.4.1.850.100.1.6.3.23 |
| tlUpsAlarmFuseFailure The failure of one or more fuses has been detected. | node | - | .1.3.6.1.4.1.850.100.1.6.3.24 |
| tlUpsAlarmGeneralFault A general fault in the UPS has been detected. | node | - | .1.3.6.1.4.1.850.100.1.6.3.25 |
| tlUpsAlarmDiagnosticTestFailed The result of the last diagnostic test indicates a
failure. | node | - | .1.3.6.1.4.1.850.100.1.6.3.26 |
| tlUpsAlarmCommunicationsLost A problem has been encountered in the communications
between the agent and the UPS. | node | - | .1.3.6.1.4.1.850.100.1.6.3.27 |
| tlUpsAlarmAwaitingPower The UPS output is off and the UPS is awaiting the
return of input power. | node | - | .1.3.6.1.4.1.850.100.1.6.3.28 |
| tlUpsAlarmShutdownPending A upsShutdownAfterDelay countdown is underway. | node | - | .1.3.6.1.4.1.850.100.1.6.3.29 |
| tlUpsAlarmLoadLevelAboveThreshold The load level is above the designated threshold. | node | - | .1.3.6.1.4.1.850.100.1.6.3.3 |
| tlUpsAlarmShutdownImminent The UPS will turn off power to the load in less than
5 seconds; this may be either a timed shutdown or a
low battery shutdown. | node | - | .1.3.6.1.4.1.850.100.1.6.3.30 |
| tlUpsAlarmTestInProgress A test is in progress, as initiated and indicated by
the Test Group. Tests initiated via other
implementation-specific mechanisms can indicate the
presence of the testing in the … | node | - | .1.3.6.1.4.1.850.100.1.6.3.31 |
| tlUpsAlarmCircuitBreaker1Open Circuit breakers #1 is open. | node | - | .1.3.6.1.4.1.850.100.1.6.3.32 |
| tlUpsAlarmCircuitBreaker2Open Circuit breakers #2 is open. | node | - | .1.3.6.1.4.1.850.100.1.6.3.33 |
| tlUpsAlarmCircuitBreaker3Open Circuit breakers #3 is open. | node | - | .1.3.6.1.4.1.850.100.1.6.3.34 |
| tlUpsAlarmCircuitBreaker4Open Circuit breakers #4 is open. | node | - | .1.3.6.1.4.1.850.100.1.6.3.35 |
| tlUpsAlarmCircuitBreaker5Open Circuit breakers #5 is open. | node | - | .1.3.6.1.4.1.850.100.1.6.3.36 |
| tlUpsAlarmCircuitBreaker6Open Circuit breakers #6 is open. | node | - | .1.3.6.1.4.1.850.100.1.6.3.37 |
| tlUpsAlarmCircuitBreaker7Open Circuit breakers #7 is open. | node | - | .1.3.6.1.4.1.850.100.1.6.3.38 |
| tlUpsAlarmCircuitBreaker8Open Circuit breakers #8 is open. | node | - | .1.3.6.1.4.1.850.100.1.6.3.39 |
| tlUpsAlarmOutputCurrentChanged The output current changed from its last known value. | node | - | .1.3.6.1.4.1.850.100.1.6.3.4 |
| tlUpsAlarmCurrent1AboveThreshold The output current on line 1 exceeds load limits. | node | - | .1.3.6.1.4.1.850.100.1.6.3.40 |
| tlUpsAlarmCurrent2AboveThreshold The output current on line 2 exceeds load limits. | node | - | .1.3.6.1.4.1.850.100.1.6.3.41 |
| tlUpsAlarmCurrent3AboveThreshold The output current on line 3 exceeds load limits. | node | - | .1.3.6.1.4.1.850.100.1.6.3.42 |
| tlUpsAlarmRuntimeBelowWarningLevel The battery seconds remaining is below warning level. | node | - | .1.3.6.1.4.1.850.100.1.6.3.43 |
| tlUpsAlarmBusStartVoltageLow The inverter start up bus voltage is too low. | node | - | .1.3.6.1.4.1.850.100.1.6.3.44 |
| tlUpsAlarmBusOverVoltage The inverter bus voltage is too high. | node | - | .1.3.6.1.4.1.850.100.1.6.3.45 |
| tlUpsAlarmBusUnderVoltage The inverter bus voltage is too low. | node | - | .1.3.6.1.4.1.850.100.1.6.3.46 |
| tlUpsAlarmBusVoltageUnbalanced The inverter bus voltage is not balanced. | node | - | .1.3.6.1.4.1.850.100.1.6.3.47 |
| tlUpsAlarmInverterSoftStartBad The inverter bus voltage cannot reach desired voltage within a
specified duration. | node | - | .1.3.6.1.4.1.850.100.1.6.3.48 |
| tlUpsAlarmInverterOverVoltage The inverter voltage is too high. | node | - | .1.3.6.1.4.1.850.100.1.6.3.49 |
| tlUpsAlarmBatteryAgeAboveThreshold One or more batteries have been determined to require
replacement. | node | - | .1.3.6.1.4.1.850.100.1.6.3.5 |
| tlUpsAlarmInverterUnderVoltage The inverter voltage is too low. | node | - | .1.3.6.1.4.1.850.100.1.6.3.50 |
| tlUpsAlarmInverterCircuitBad The inverter output is shorted. | node | - | .1.3.6.1.4.1.850.100.1.6.3.51 |
| tlUpsAlarmBatteryOverVoltage The battery voltage is too high. | node | - | .1.3.6.1.4.1.850.100.1.6.3.52 |
| tlUpsAlarmBatteryUnderVoltage The battery voltage is too low. | node | - | .1.3.6.1.4.1.850.100.1.6.3.53 |
| tlUpsAlarmSiteWiringFault The utility input wiring is faulty. | node | - | .1.3.6.1.4.1.850.100.1.6.3.54 |
| tlUpsAlarmOverTemperatureProtection The over temperature protection is activated. | node | - | .1.3.6.1.4.1.850.100.1.6.3.55 |
| tlUpsAlarmOverCharged The UPS is over charged. | node | - | .1.3.6.1.4.1.850.100.1.6.3.56 |
| tlUpsAlarmEPOActive The EPO is currently activate. | node | - | .1.3.6.1.4.1.850.100.1.6.3.57 |
| tlUpsAlarmBypassFrequencyBad The bypass frequency is out of tolerance. | node | - | .1.3.6.1.4.1.850.100.1.6.3.58 |
| tlUpsAlarmExternalSmartBatteryAgeAboveThreshold One or more external smart batteries have been determined to require
replacement. | node | - | .1.3.6.1.4.1.850.100.1.6.3.59 |
| tlUpsAlarmLoadOff The load is off. | node | - | .1.3.6.1.4.1.850.100.1.6.3.6 |
| tlUpsAlarmSmartBatteryCommLost Communications with the smart batteries was lost. | node | - | .1.3.6.1.4.1.850.100.1.6.3.61 |
| tlUpsAlarmSourceAOutage Input power source A is not present. | node | - | .1.3.6.1.4.1.850.100.1.6.3.62 |
| tlUpsAlarmSourceBOutage Input power source B is not present. | node | - | .1.3.6.1.4.1.850.100.1.6.3.63 |
| tlUpsAlarmWatchdogReset The internal watchdog triggered a reset of the device. | node | - | .1.3.6.1.4.1.850.100.1.6.3.64 |
| tlUpsAlarmUserDefined A user-defined event is in alarm. | node | - | .1.3.6.1.4.1.850.100.1.6.3.7 |
| tlUpsAlarmBatteryBad One or more batteries have been determined to require
replacement. | node | - | .1.3.6.1.4.1.850.100.1.6.3.8 |
| tlUpsAlarmOnBattery The UPS is drawing power from the batteries. | node | - | .1.3.6.1.4.1.850.100.1.6.3.9 |