tlCoolingAirFilterRunHoursViolation
TRIPPLITE-12X ·
.1.3.6.1.4.1.850.103.6.3.8
Object
node
The air filter run hours was violated.
Context
- MIB
- TRIPPLITE-12X
- OID
.1.3.6.1.4.1.850.103.6.3.8- Type
- node
- Status
- current
- Parent
- tlCoolingWellKnownAlarms
- Siblings
- 36
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tlCoolingSupplyAirSensorFault The supply air sensor is in fault. | node | - | .1.3.6.1.4.1.850.103.6.3.1 |
| tlCoolingInverterCommunicationsFault The inverter communications is in fault. | node | - | .1.3.6.1.4.1.850.103.6.3.10 |
| tlCoolingRemoteShutdownViaInputContact A remote shutdown was triggerd by an input contact. | node | - | .1.3.6.1.4.1.850.103.6.3.11 |
| tlCoolingCondensatePumpFault The condensate pump is in fault. | node | - | .1.3.6.1.4.1.850.103.6.3.12 |
| tlCoolingLowRefrigerantStartupFault The low refrigerant startup is in fault. | node | - | .1.3.6.1.4.1.850.103.6.3.13 |
| tlCoolingCondenserFanFault The condenser fan is in fault. | node | - | .1.3.6.1.4.1.850.103.6.3.14 |
| tlCoolingCondenserFailure The condenser has failed. | node | - | .1.3.6.1.4.1.850.103.6.3.15 |
| tlCoolingEvaporatorCoolingFailure The evaporator cooling is in fault. | node | - | .1.3.6.1.4.1.850.103.6.3.16 |
| tlCoolingReturnAirTempHigh The return air temperature is high. | node | - | .1.3.6.1.4.1.850.103.6.3.17 |
| tlCoolingSupplyAirTempHigh The supply air temperature is high. | node | - | .1.3.6.1.4.1.850.103.6.3.18 |
| tlCoolingEvaporatorFailure The evaporator has failed. | node | - | .1.3.6.1.4.1.850.103.6.3.19 |
| tlCoolingReturnAirSensorFault The return air sensor is in fault. | node | - | .1.3.6.1.4.1.850.103.6.3.2 |
| tlCoolingEvaporatorFreezeUp The evaporator is frozen. | node | - | .1.3.6.1.4.1.850.103.6.3.20 |
| tlCoolingDischargePressureHigh The discharge pressure is high. | node | - | .1.3.6.1.4.1.850.103.6.3.21 |
| tlCoolingPressureGaugeFailure The pressure gauge has failed. | node | - | .1.3.6.1.4.1.850.103.6.3.22 |
| tlCoolingDischargePressurePersistentHigh The discharge pressure is persistently high. | node | - | .1.3.6.1.4.1.850.103.6.3.23 |
| tlCoolingSuctionPressureLowStartFailure Cannot start due to low suction pressure. | node | - | .1.3.6.1.4.1.850.103.6.3.24 |
| tlCoolingSuctionPressureLow The suction pressure is low. | node | - | .1.3.6.1.4.1.850.103.6.3.25 |
| tlCoolingSuctionPressurePersistentLow The suction pressure is persistently low. | node | - | .1.3.6.1.4.1.850.103.6.3.26 |
| tlCoolingStartupLinePressureImbalance The startup line pressure is in imbalance. | node | - | .1.3.6.1.4.1.850.103.6.3.27 |
| tlCoolingCompressorFailure The compressor has failed. | node | - | .1.3.6.1.4.1.850.103.6.3.28 |
| tlCoolingCurrentLimit The current is out of range. | node | - | .1.3.6.1.4.1.850.103.6.3.29 |
| tlCoolingCondenserInletAirSensorFault The condenser inlet air sensor is in fault. | node | - | .1.3.6.1.4.1.850.103.6.3.3 |
| tlCoolingWaterLeak Water is leaking. | node | - | .1.3.6.1.4.1.850.103.6.3.30 |
| tlCoolingFanUnderCurrent The fan is under current. | node | - | .1.3.6.1.4.1.850.103.6.3.31 |
| tlCoolingFanOverCurrent The fan is over current. | node | - | .1.3.6.1.4.1.850.103.6.3.32 |
| tlCoolingDischargePressureSensorFault The discharge pressure sensor is in fault. | node | - | .1.3.6.1.4.1.850.103.6.3.33 |
| tlCoolingWaterFull Water is Full. | node | - | .1.3.6.1.4.1.850.103.6.3.34 |
| tlCoolingAutoCoolingOn Automatic cooling was activated to lower the temperature below the
remote set point. | node | - | .1.3.6.1.4.1.850.103.6.3.35 |
| tlCoolingPowerButtonPressed Power button was pressed on the front panel. | node | - | .1.3.6.1.4.1.850.103.6.3.36 |
| tlCoolingDisconnectedFromDevice The device communications is disconnected. | node | - | .1.3.6.1.4.1.850.103.6.3.37 |
| tlCoolingCondenserOutletAirSensorFault The condenser outlet air sensor is in fault. | node | - | .1.3.6.1.4.1.850.103.6.3.4 |
| tlCoolingSuctionTemperatureSensorFault The suction temperature sensor is in fault. | node | - | .1.3.6.1.4.1.850.103.6.3.5 |
| tlCoolingEvaporatorTemperatureSensorFault The evaporator temperature sensor is in fault. | node | - | .1.3.6.1.4.1.850.103.6.3.6 |
| tlCoolingAirFilterClogged The air filter is clogged. | node | - | .1.3.6.1.4.1.850.103.6.3.7 |
| tlCoolingSuctionPressureSensorFault The suction pressure sensor is in fault. | node | - | .1.3.6.1.4.1.850.103.6.3.9 |