trpzApConfApConfigLedMode

TRAPEZE-NETWORKS-AP-CONFIG-MIB · .1.3.6.1.4.1.14525.4.14.1.2.1.17
MIB view Table view

Object

column TRAPEZE-NETWORKS-AP-TCTrpzApLedMode 
LED Mode (auto/static/off).

Context

MIB
TRAPEZE-NETWORKS-AP-CONFIG-MIB
OID
.1.3.6.1.4.1.14525.4.14.1.2.1.17
Type
column
Access
readonly
Status
current
Parent
trpzApConfApConfigEntry
Table
trpzApConfApConfigTable
Siblings
31

Syntax

TRAPEZE-NETWORKS-AP-TCTrpzApLedMode
Source
TRAPEZE-NETWORKS-AP-TCTrpzApLedMode
Base type
Enumeration

Values & Constraints

Type Values
1auto
2static
3off

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
trpzApConfApConfigApNum
The Number of this AP (administratively assigned).
columnTRAPEZE-NETWORKS-AP-TCTrpzApNum.1.3.6.1.4.1.14525.4.14.1.2.1.1
trpzApConfApConfigContact
The Contact information for this AP.
columnOctetString.1.3.6.1.4.1.14525.4.14.1.2.1.10
trpzApConfApConfigLocation
The Location information for this AP.
columnOctetString.1.3.6.1.4.1.14525.4.14.1.2.1.11
trpzApConfApConfigBlinkEnabled
Indicates whether the LED blink mode is enabled on this AP.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.14525.4.14.1.2.1.12
trpzApConfApConfigForceImageDownloadEnabled
Indicates whether this AP is forced to always download an image from the AC upon boot.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.14525.4.14.1.2.1.13
trpzApConfApConfigFirmwareUpgradeEnabled
Indicates whether automatic boot firmware upgrade is enabled on this AP.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.14525.4.14.1.2.1.14
trpzApConfApConfigLocalSwitchingEnabled
Indicates whether local switching is enabled on this AP.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.14525.4.14.1.2.1.15
trpzApConfApConfigPowerMode
The mode in which this AP is supplying power to its radios.
columnTRAPEZE-NETWORKS-AP-TCTrpzApPowerMode.1.3.6.1.4.1.14525.4.14.1.2.1.16
trpzApConfApConfigDescription
The configured Description for this AP.
columnOctetString.1.3.6.1.4.1.14525.4.14.1.2.1.18
trpzApConfApConfigLldpMode
LLDP Mode (tx/disabled).
columnTrpzApLldpMode.1.3.6.1.4.1.14525.4.14.1.2.1.19
trpzApConfApConfigApAttachType
How this AP is attached to the AC (directly or via L2/L3 network).
columnTRAPEZE-NETWORKS-AP-TCTrpzApAttachType.1.3.6.1.4.1.14525.4.14.1.2.1.2
trpzApConfApConfigLldpMedEnabled
Indicates whether LLDP-MED is enabled for this AP.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.14525.4.14.1.2.1.20
trpzApConfApConfigLldpMedExtPowerViaMdiTlvSelected
Indicates whether LLDP-MED Extended Power via MDI TLV is selected for this AP.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.14525.4.14.1.2.1.21
trpzApConfApConfigLldpMedInventoryTlvSelected
Indicates whether LLDP-MED Inventory TLV is selected for this AP.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.14525.4.14.1.2.1.22
trpzApConfApConfigApTunnelEnabled
Indicates whether AP to AP tunnels are enabled for this AP.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.14525.4.14.1.2.1.23
trpzApConfApConfigDataSecurityEnabled
Indicates whether Data Security is enabled for this AP.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.14525.4.14.1.2.1.24
trpzApConfApConfigWanOutageModeEnabled
Indicates whether WAN Outage (remote) Mode is enabled for this AP.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.14525.4.14.1.2.1.25
trpzApConfApConfigWanOutageExtendedTimeout
The duration for which the AP can stay in WAN outage mode, in hours. A value of zero means the AP can stay in outage mode indefinitely.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.14525.4.14.1.2.1.26
trpzApConfApConfigWanOutageEvaluationPeriod
The AC connection Evaluation Period for APs in WAN Outage mode, in seconds.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.14525.4.14.1.2.1.27
trpzApConfApConfigRemoteSiteName
The name of the remote site that the AP is part of. An empty string means that the AP is not part of any remote site.
columnOctetString.1.3.6.1.4.1.14525.4.14.1.2.1.28
trpzApConfApConfigPathMtu
The configured Maximum Transmission Unit (in bytes) for communication between AP and AC. The value 0 means that the MTU was not administratively configured.
columnbytes SNMPv2-SMIUnsigned32.1.3.6.1.4.1.14525.4.14.1.2.1.29
trpzApConfApConfigPhysPortNum
Identifies the physical port used to attach this AP. Only valid for directly attached APs, otherwise will be zero.
columnTRAPEZE-NETWORKS-BASIC-TCTrpzPhysPortNumberOrZero.1.3.6.1.4.1.14525.4.14.1.2.1.3
trpzApConfApConfigHighLatencyModeEnabled
Indicates whether the high-latency mode is enabled for the AP.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.14525.4.14.1.2.1.30
trpzApConfApConfigApName2
The configured Name for this AP; defaults to AP<Number> (examples: 'AP01', 'AP22', 'AP333', 'AP4444'); could have been changed from CLI to a meaningful name, for example the locat…
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.14525.4.14.1.2.1.31
trpzApConfApConfigCacheConfigEnabled
Indicates whether the configuration of the AP is saved on the AP itself, so that it won't be lost after reboot. To enable this setting, the AP must have outage mode enabled.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.14525.4.14.1.2.1.32
trpzApConfApConfigApSerialNum
The Serial Number used to identify this AP. Only valid for network attached APs, otherwise will be a zero length string.
columnTRAPEZE-NETWORKS-AP-TCTrpzApSerialNum.1.3.6.1.4.1.14525.4.14.1.2.1.4
trpzApConfApConfigApModelName
The Model name of this AP.
columnOctetString.1.3.6.1.4.1.14525.4.14.1.2.1.5
trpzApConfApConfigFingerprint
The RSA key fingerprint configured on this AP (binary value: it is the MD5 hash of the public key of the RSA key pair). For directly attached APs the fingerprint is a zero length …
columnTRAPEZE-NETWORKS-AP-TCTrpzApFingerprint.1.3.6.1.4.1.14525.4.14.1.2.1.6
trpzApConfApConfigBias
Bias (high/low/sticky).
columnTRAPEZE-NETWORKS-AP-TCTrpzApBias.1.3.6.1.4.1.14525.4.14.1.2.1.7
trpzApConfApConfigApTimeout
The communication timeout for this AP, in seconds.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.14525.4.14.1.2.1.8
trpzApConfApConfigApName deprecated
The configured Name for this AP. Names longer than 16 characters will be truncated (example: 'APNamelongerthan16chars' will be shown as 'APNamelongertha~'). Deprecated b…
columnOctetString.1.3.6.1.4.1.14525.4.14.1.2.1.9