wlan0Radio
TRANZEO-ENROUTE-MUNIWIFI-MIB ·
.1.3.6.1.4.1.24350.11.21
Object
scalar
r/w
OctetString
which physical radio this vap is on (0 or 1)
Context
- MIB
- TRANZEO-ENROUTE-MUNIWIFI-MIB
- OID
.1.3.6.1.4.1.24350.11.21- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- wlan0
- Siblings
- 24
Syntax
OctetString
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wlan0Acl | node | - | .1.3.6.1.4.1.24350.11.1 |
| wlan0Hideessid don't broadcast the essid | scalar | OctetString | .1.3.6.1.4.1.24350.11.10 |
| wlan0If interface associated with this module | scalar | OctetString | .1.3.6.1.4.1.24350.11.11 |
| wlan0Ip | node | - | .1.3.6.1.4.1.24350.11.12 |
| wlan0Iwconfig | node | - | .1.3.6.1.4.1.24350.11.13 |
| wlan0Iwpriv | node | - | .1.3.6.1.4.1.24350.11.14 |
| wlan0Key wep key - if present, overrides .keys | scalar | OctetString | .1.3.6.1.4.1.24350.11.15 |
| wlan0Keys | node | - | .1.3.6.1.4.1.24350.11.16 |
| wlan0Mconfd | node | - | .1.3.6.1.4.1.24350.11.17 |
| wlan0Mode operating mode ( ap/master, adhoc, adhoc-demo, sta/client ) | scalar | OctetString | .1.3.6.1.4.1.24350.11.18 |
| wlan0Mroute | node | - | .1.3.6.1.4.1.24350.11.19 |
| wlan0Beaconinterval beacon interval in milliseconds | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.24350.11.2 |
| wlan0Mtu maximum transmission unit - may cause serious problems if set too low | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.24350.11.20 |
| wlan0Rate communications rate | scalar | OctetString | .1.3.6.1.4.1.24350.11.22 |
| wlan0Role intended interface role (mesh, pxp (point to point), bridge) | scalar | OctetString | .1.3.6.1.4.1.24350.11.23 |
| wlan0Routes | node | - | .1.3.6.1.4.1.24350.11.24 |
| wlan0Topomc | node | - | .1.3.6.1.4.1.24350.11.25 |
| wlan0Cellid adhoc cell id | scalar | OctetString | .1.3.6.1.4.1.24350.11.3 |
| wlan0Dhcp | node | - | .1.3.6.1.4.1.24350.11.4 |
| wlan0Enable interface is enabled | scalar | OctetString | .1.3.6.1.4.1.24350.11.5 |
| wlan0Enhsec ignore clients that specify 'ANY' ssid | scalar | OctetString | .1.3.6.1.4.1.24350.11.6 |
| wlan0Essid essid for this ap | scalar | OctetString | .1.3.6.1.4.1.24350.11.7 |
| wlan0Fabric | node | - | .1.3.6.1.4.1.24350.11.8 |
| wlan0Frag fragmentation threshold | scalar | OctetString | .1.3.6.1.4.1.24350.11.9 |