tpIgmpRouterPort
TPLINK-IGMPSNOOPING-MIB ·
.1.3.6.1.4.1.11863.6.25.1.1.3.1.1.8
Object
column
r/w
OctetString
Config the static router ports which are mainly used in the network with stable topology.
Context
- MIB
- TPLINK-IGMPSNOOPING-MIB
- OID
.1.3.6.1.4.1.11863.6.25.1.1.3.1.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- tpIgmpVlanEntry
- Table
- tpIgmpVlanTable
- Siblings
- 15
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tpIgmpVlanId Enter the VLAN ID to enable IGMP Snooping for the desired VLAN,1-4094. | column | Integer32 | .1.3.6.1.4.1.11863.6.25.1.1.3.1.1.1 |
| tpIgmpQueryEnable Select Enable/Disable IGMP Querier.
0. Disable
1. Enable | column | Enumeration | .1.3.6.1.4.1.11863.6.25.1.1.3.1.1.10 |
| tpIgmpQueryInterval Enter the Query message interval time. The Querier will send General Query Message with this interval. The interval is ranging from 10 to 300 seconds. | column | Integer32 | .1.3.6.1.4.1.11863.6.25.1.1.3.1.1.11 |
| tpIgmpQueryMaxResponseTime Enter the value of Maximum Response Time field of the Query message. The host is expected to response to an IGMP general query within this time. The time is ranging from 1 to 25 s… | column | Integer32 | .1.3.6.1.4.1.11863.6.25.1.1.3.1.1.12 |
| tpIgmpQueryGeneralSrcIp Enter the General Query Message source IP address. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.11863.6.25.1.1.3.1.1.13 |
| tpIgmpQueryLastMemberCount Enter the Last Listener Query numbers. When the multicast group has no more member ports,
it will send this numbers of Specific Query Message to check whether there is another me… | column | Integer32 | .1.3.6.1.4.1.11863.6.25.1.1.3.1.1.14 |
| tpIgmpQueryLastMemberInterval Enter the Last Listener Query interval time. When the multicast group has no more member ports,
it will send the Specific Query Message with this interval time to check whether t… | column | Integer32 | .1.3.6.1.4.1.11863.6.25.1.1.3.1.1.15 |
| tpIgmpVlanStatus the following two values are states:
these values may be read or written
active(1),
notInService(2),
the following value is a state:
this value may be read, but not… | column | TPLINK-TC-MIBTPRowStatus | .1.3.6.1.4.1.11863.6.25.1.1.3.1.1.16 |
| tpIgmpVlanEnable Select Enable/Disable IGMP Snooping for the desired vlan.
0. Disable
1. Enable | column | Enumeration | .1.3.6.1.4.1.11863.6.25.1.1.3.1.1.2 |
| tpIgmpVlanFastLeave Select Enable/Disable Fast Leave feature for the desired vlan.
If Fast Leave is enabled for a vlan, the Switch will immediately
remove this port from the multicast group upon re… | column | Enumeration | .1.3.6.1.4.1.11863.6.25.1.1.3.1.1.3 |
| tpIgmpVlanReportSuppression Select Enable/Disable IGMP Snooping report suppression function globally on the Switch.
0. Disable
1. Enable | column | Enumeration | .1.3.6.1.4.1.11863.6.25.1.1.3.1.1.4 |
| tpIgmpRouterTime Specify the aging time of the router port. Within this time,
if the switch don't receive IGMP query message from the router port,
it will consider this port is not a router port… | column | Integer32 | .1.3.6.1.4.1.11863.6.25.1.1.3.1.1.5 |
| tpIgmpMemberTime Specify the aging time of the member port. Within this time,
if the switch don't receive IGMP report message from the member port,
it will consider this port is not a member port… | column | Integer32 | .1.3.6.1.4.1.11863.6.25.1.1.3.1.1.6 |
| tpIgmpLeaveTime Specify the leave time for the VLAN.
When the switch receives a leave message from a port to leave a multicast group,
it will wait for a leave time before removing the port from… | column | Integer32 | .1.3.6.1.4.1.11863.6.25.1.1.3.1.1.7 |
| tpIgmpForbiddenRouterPort Config the forbidden router ports which are mainly used to forbidden
specified ports to become router ports. | column | OctetString | .1.3.6.1.4.1.11863.6.25.1.1.3.1.1.9 |