tpCombTimeSegment
TPLINK-ACL-RULE-MIB ·
.1.3.6.1.4.1.11863.6.26.1.1.3.1.27
Object
column
r/w
OctetString
Combined ACL time segment name(max length: 16), the time segment name must be configured previously and string length setting to zero means that this field is disabled.
Context
- MIB
- TPLINK-ACL-RULE-MIB
- OID
.1.3.6.1.4.1.11863.6.26.1.1.3.1.27- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- tpCombRuleEntry
- Table
- tpCombRuleTable
- Siblings
- 27
Syntax
OctetString
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tpCombAclId Combined MAC+IP ACL ID. | column | Integer32 | .1.3.6.1.4.1.11863.6.26.1.1.3.1.1 |
| tpCombVlanId VLAN ID, 0-4094, value '0' means that the vid field is disabled. | column | Integer32 | .1.3.6.1.4.1.11863.6.26.1.1.3.1.10 |
| tpCombEtherType Ethernet protocol type, 0x0-0x10000.
Value '65536' or '0x10000' means that the EtherType field is disabled. | column | Integer32 | .1.3.6.1.4.1.11863.6.26.1.1.3.1.11 |
| tpCombPri 802.1P priority, 0-8, value '8' means that the priority field is disabled. | column | Integer32 | .1.3.6.1.4.1.11863.6.26.1.1.3.1.12 |
| tpCombSipAddress Source IP address, value '0.0.0.0' means that the source IP address is disabled. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.11863.6.26.1.1.3.1.13 |
| tpCombSipMask Source IP mask, value '0.0.0.0' or zero length means that the mask is 255.255.255.255. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.11863.6.26.1.1.3.1.14 |
| tpCombDipAddress Destination IP address, value '0.0.0.0' means that the destination IP address is disabled. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.11863.6.26.1.1.3.1.15 |
| tpCombDipMask Destination IP mask, value '0.0.0.0' or zero length means that the mask is 255.255.255.255. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.11863.6.26.1.1.3.1.16 |
| tpCombDscp IP DSCP, 0-64, value '64' means this field is disabled.
conflicts with the Tos and Pre. | column | Integer32 | .1.3.6.1.4.1.11863.6.26.1.1.3.1.17 |
| tpCombTos IP type of service(ToS), 0-16, value '16' means this field is disabled. | column | Integer32 | .1.3.6.1.4.1.11863.6.26.1.1.3.1.18 |
| tpCombPre IP pre, 0-8, value '8' means this field is disabled. | column | Integer32 | .1.3.6.1.4.1.11863.6.26.1.1.3.1.19 |
| tpCombRuleId Combined ACL rule ID. | column | Integer32 | .1.3.6.1.4.1.11863.6.26.1.1.3.1.2 |
| tpCombFragment IP fragment, conflicts with all the L4 feature. | column | Enumeration | .1.3.6.1.4.1.11863.6.26.1.1.3.1.20 |
| tpCombProtocol L4 protocol type, 0-255, value '0' means this field is disabled.
This field conflicts with the TCP Flags or the source/destination port numbers
when it is not the value '6'(TCP),… | column | Integer32 | .1.3.6.1.4.1.11863.6.26.1.1.3.1.21 |
| tpCombSourcePort IP TCP/UDP source port, 0-65536, value '65536' means that this field is disabled. | column | Integer32 | .1.3.6.1.4.1.11863.6.26.1.1.3.1.22 |
| tpCombSourcePortMask IP TCP/UDP source port mask, 0000-ffff, 4 hex number, NULL string will set this mask to a default value ffff. | column | OctetString | .1.3.6.1.4.1.11863.6.26.1.1.3.1.23 |
| tpCombDestPort IP TCP/UDP destination port, 0-65536, value '65536' means that this field is disabled. | column | Integer32 | .1.3.6.1.4.1.11863.6.26.1.1.3.1.24 |
| tpCombDestPortMask IP TCP/UDP destination port mask, 0000-ffff, 4 hex number, NULL string will set this mask to a default value ffff. | column | OctetString | .1.3.6.1.4.1.11863.6.26.1.1.3.1.25 |
| tpCombTcpFlag IP TCP flag, this field is described as a bit-map structure:
There are 12 bits of this field, the higher 6 bits show us whether these TCP flags are enabled(1) or disabled(0).
The … | column | Integer32 | .1.3.6.1.4.1.11863.6.26.1.1.3.1.26 |
| tpCombRuleStatus the following two values are states:
these values may be read or written
active(1),
notInService(2),
the following value is a state:
this value may be read, but not… | column | TPLINK-TC-MIBTPRowStatus | .1.3.6.1.4.1.11863.6.26.1.1.3.1.28 |
| tpCombAclName Combined ACL name, NULL string will give this ACL a default name as 'ACL_n', n stands for ACL ID. | column | OctetString | .1.3.6.1.4.1.11863.6.26.1.1.3.1.3 |
| tpCombSecOperation Combined ACL Security Operation. | column | Enumeration | .1.3.6.1.4.1.11863.6.26.1.1.3.1.4 |
| tpCombCounterLogging Combined ACL rule counter logging operation. | column | Enumeration | .1.3.6.1.4.1.11863.6.26.1.1.3.1.5 |
| tpCombSmacAddress Source MAC address, string length setting to zero means that the source MAC address is disabled. | column | OctetString | .1.3.6.1.4.1.11863.6.26.1.1.3.1.6 |
| tpCombSmacMask Source MAC Mask, string length setting to zero means that every bit of the mask is 1. | column | OctetString | .1.3.6.1.4.1.11863.6.26.1.1.3.1.7 |
| tpCombDmacAddress Destination MAC address, string length setting to zero means that the destination MAC address is disabled. | column | OctetString | .1.3.6.1.4.1.11863.6.26.1.1.3.1.8 |
| tpCombDmacMask Destination MAC Mask, string length setting to zero means that every bit of the mask is 1. | column | OctetString | .1.3.6.1.4.1.11863.6.26.1.1.3.1.9 |