tn3270eRtDataEntry
TN3270E-RT-MIB ·
.1.3.6.1.2.1.34.9.1.2.1
Object
row
Entries in this table are created based upon the
tn3270eRtCollCtlTable. When the corresponding
tn3270eRtCollCtlType has aggregate(0) specified, a single
entry is created in this table, with a tn3270eRtDataClientAddrType
of unknown(0), a zero-length octet string value for
tn3270eRtDataClientAddress, and a tn3270eRtDataClientPort value of
0. When aggregate(0) is not specified, a separate entry is
created for each client in the group.
Note that the following objects defined within an entry in this
table can wrap:
tn3270eRtDataTotalRts
tn3270eRtDataTotalIpRts
tn3270eRtDataCountTrans
tn3270eRtDataCountDrs
tn3270eRtDataElapsRnTrpSq
tn3270eRtDataElapsIpRtSq
tn3270eRtDataBucket1Rts
tn3270eRtDataBucket2Rts
tn3270eRtDataBucket3Rts
tn3270eRtDataBucket4Rts
tn3270eRtDataBucket5Rts
Context
- MIB
- TN3270E-RT-MIB
- OID
.1.3.6.1.2.1.34.9.1.2.1- Type
- row
- Status
- current
- Parent
- tn3270eRtDataTable
- Table
- tn3270eRtDataTable
- Children
- 20
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tn3270eRtDataClientAddrType Indicates the type of address represented by the value
of tn3270eRtDataClientAddress. The value unknown(0) is
used if aggregate data is being collected for the client
group. | column | IANATn3270eTC-MIBIANATn3270eAddrType | .1.3.6.1.2.1.34.9.1.2.1.1 |
| tn3270eRtDataCountTrans The count of the total number of transactions detected.
A management application can detect discontinuities in this
counter by monitoring the tn3270eRtDataDiscontin… | column | transactions SNMPv2-SMICounter32 | .1.3.6.1.2.1.34.9.1.2.1.10 |
| tn3270eRtDataCountDrs The count of the total number of definite responses
detected.
A management application can detect discontinuities in this
counter by monitoring the tn3270eRtDataDis… | column | definite responses SNMPv2-SMICounter32 | .1.3.6.1.2.1.34.9.1.2.1.11 |
| tn3270eRtDataElapsRndTrpSq The sum of the elapsed round trip time squared. The sum
of the squares is kept in order to enable calculation of
a variance. | column | tenths of seconds squared SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.34.9.1.2.1.12 |
| tn3270eRtDataElapsIpRtSq The sum of the elapsed IP round trip time squared.
The sum of the squares is kept in order to enable
calculation of a variance. | column | tenths of seconds squared SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.34.9.1.2.1.13 |
| tn3270eRtDataBucket1Rts The count of the response times falling into bucket 1.
A management application can detect discontinuities in this
counter by monitoring the tn3270eRtDataDiscontinu… | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.34.9.1.2.1.14 |
| tn3270eRtDataBucket2Rts The count of the response times falling into bucket 2.
A management application can detect discontinuities in this
counter by monitoring the tn3270eRtDataDiscontinu… | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.34.9.1.2.1.15 |
| tn3270eRtDataBucket3Rts The count of the response times falling into bucket 3.
A management application can detect discontinuities in this
counter by monitoring the tn3270eRtDataDiscontinu… | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.34.9.1.2.1.16 |
| tn3270eRtDataBucket4Rts The count of the response times falling into bucket 4.
A management application can detect discontinuities in this
counter by monitoring the tn3270eRtDataDiscontinu… | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.34.9.1.2.1.17 |
| tn3270eRtDataBucket5Rts The count of the response times falling into bucket 5.
A management application can detect discontinuities in this
counter by monitoring the tn3270eRtDataDiscontinu… | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.34.9.1.2.1.18 |
| tn3270eRtDataRtMethod The value of this object indicates the method that was
used in calculating the IP network time.
The value 'none(0) indicates that response times were not
calculated… | column | Enumeration | .1.3.6.1.2.1.34.9.1.2.1.19 |
| tn3270eRtDataClientAddress Contains the IP address of the TN3270 client being
monitored. A zero-length octet string is used if
aggregate data is being collected for the client group. | column | IANATn3270eTC-MIBIANATn3270eAddress | .1.3.6.1.2.1.34.9.1.2.1.2 |
| tn3270eRtDataDiscontinuityTime The value of sysUpTime on the most recent occasion at
which one or more of this entry's counter objects
suffered a discontinuity. This may happen if a TN3270E
server is stopped a… | column | SNMPv2-TCTimeStamp | .1.3.6.1.2.1.34.9.1.2.1.20 |
| tn3270eRtDataClientPort Contains the client port number of the TN3270 client being
monitored. The value 0 is used if aggregate data is being
collected for the client group, or if the
tn3270eRtDataClient… | column | Unsigned32 | .1.3.6.1.2.1.34.9.1.2.1.3 |
| tn3270eRtDataAvgRt The average total response time measured over the last
collection interval. | column | tenths of seconds SNMPv2-SMIGauge32 | .1.3.6.1.2.1.34.9.1.2.1.4 |
| tn3270eRtDataAvgIpRt The average IP response time measured over the last
collection interval. | column | tenths of seconds SNMPv2-SMIGauge32 | .1.3.6.1.2.1.34.9.1.2.1.5 |
| tn3270eRtDataAvgCountTrans The sliding transaction count used for calculating the
values of the tn3270eRtDataAvgRt and tn3270eRtDataAvgIpRt
objects. The actual transaction count is available in
the tn3270e… | column | transactions SNMPv2-SMIGauge32 | .1.3.6.1.2.1.34.9.1.2.1.6 |
| tn3270eRtDataIntTimeStamp The date and time of the last interval that
tn3270eRtDataAvgRt, tn3270eRtDataAvgIpRt, and
tn3270eRtDataAvgCountTrans were calculated.
Prior to the calculation of th… | column | SNMPv2-TCDateAndTime | .1.3.6.1.2.1.34.9.1.2.1.7 |
| tn3270eRtDataTotalRts The count of the total response times collected.
A management application can detect discontinuities in this
counter by monitoring the tn3270eRtDataDiscontinuityTim… | column | tenths of seconds SNMPv2-SMICounter32 | .1.3.6.1.2.1.34.9.1.2.1.8 |
| tn3270eRtDataTotalIpRts The count of the total IP-network response times
collected.
A management application can detect discontinuities in this
counter by monitoring the tn3270eRtDataDisco… | column | tenths of seconds SNMPv2-SMICounter32 | .1.3.6.1.2.1.34.9.1.2.1.9 |
Indexes
| Object | Type | Syntax | OID |
|---|---|---|---|
| TN3270E-MIBtn3270eSrvrConfIndex Identifier for a single TN3270E server.
tn3270eSrvrConfIndex values need not be
contiguous. | column | Unsigned32 | .1.3.6.1.2.1.34.8.1.1.1.1 |
| TN3270E-MIBtn3270eClientGroupName The name of a client group. Note: client group
names are required to be unique only with respect
to a single TN3270E server. | column | OctetString | .1.3.6.1.2.1.34.8.1.4.1.1 |
| tn3270eRtDataClientAddrType Indicates the type of address represented by the value
of tn3270eRtDataClientAddress. The value unknown(0) is
used if aggregate data is being collected for the client
group. | column | IANATn3270eTC-MIBIANATn3270eAddrType | .1.3.6.1.2.1.34.9.1.2.1.1 |
| tn3270eRtDataClientAddress Contains the IP address of the TN3270 client being
monitored. A zero-length octet string is used if
aggregate data is being collected for the client group. | column | IANATn3270eTC-MIBIANATn3270eAddress | .1.3.6.1.2.1.34.9.1.2.1.2 |
| tn3270eRtDataClientPort Contains the client port number of the TN3270 client being
monitored. The value 0 is used if aggregate data is being
collected for the client group, or if the
tn3270eRtDataClient… | column | Unsigned32 | .1.3.6.1.2.1.34.9.1.2.1.3 |