tnTestHdSapPortId
TN-SAS-OAM-TEST-MIB ·
.1.3.6.1.4.1.7483.7.2.2.2.17.1.6.1.15
Object
The Sap Port ID to be used for the test run, it has to be supplied along with tnTestHdSapEncapValue when the test is started.
Context
- MIB
- TN-SAS-OAM-TEST-MIB
- OID
.1.3.6.1.4.1.7483.7.2.2.2.17.1.6.1.15- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- tnTestHdCommandEntry
- Table
- tnTestHdCommandTable
- Siblings
- 19
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tnTestHdName tnTestHdName is a mandatory parameter that needs to be
set along with tnTestHdAdminStatus to start a test head
test. | column | OctetString | .1.3.6.1.4.1.7483.7.2.2.2.17.1.6.1.1 |
| tnTestHdAchvdThrpt tnTestHdAchvdThrpt is the acheived through put in the test head
run. tnTestHdAchvdThrpt is sent in the trap upon test completion | column | Integer32 | .1.3.6.1.4.1.7483.7.2.2.2.17.1.6.1.10 |
| tnTestHdCompleted tnTestHdCompleted is true if the test is completed else it is
false. tnTestHdCompleted is sent in the trap upon test completion | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.7.2.2.2.17.1.6.1.11 |
| tnTestHdStopped tnTestHdStopped is true if the test is stopped midway else it is
false. tnTestHdStopped is sent in the trap upon test completion | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.7.2.2.2.17.1.6.1.12 |
| tnTestHdTestStatus tnTestHdTestStatus is sent in the trap upon test completion.
tnTestHdTestStatus is pass if the desired test results are
acheived. | column | Enumeration | .1.3.6.1.4.1.7483.7.2.2.2.17.1.6.1.13 |
| tnTestHdCompletedTime tnTestHdCompletedTime is the time at which test head run
has completed. tnTestHdCompletedTime is sent in the trap upon
test completion. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.7483.7.2.2.2.17.1.6.1.14 |
| tnTestHdSapEncapValue The Sap Encap value to be used for the test run, it has to be supplied
along with tnTestHdSapPortId when the test is started. | column | TN-TC-MIBTmnxEncapVal | .1.3.6.1.4.1.7483.7.2.2.2.17.1.6.1.16 |
| tnTestHdAdminStatus Reflects the desired state that a Test Head should be
in:
enabled(1) - Attempt to activate the test as defined by
tnTestHdName, tnTestHdOwner, tnTestHdProfId,… | column | Enumeration | .1.3.6.1.4.1.7483.7.2.2.2.17.1.6.1.17 |
| tnTestHdProfId tnTestHdProfId is the test head profile to be used for
the test run, it has to be supplied along with tnTestHdAdminStatus
when the test is started. tnTestHdProfEntry corresponding… | column | Integer32 | .1.3.6.1.4.1.7483.7.2.2.2.17.1.6.1.18 |
| tnTestHdAccCritId tnTestHdAccCritId is the acceptance criteria to be used for
the test run, it is an optional parameter to be supplied along
with tnTestHdAdminStatus when the test is started.
tnTes… | column | Integer32 | .1.3.6.1.4.1.7483.7.2.2.2.17.1.6.1.19 |
| tnTestHdPayLdId tnTestHdPayLd is the frame payload to be used for
the test run, it is an optional parameter to be supplied along
with tnTestHdAdminStatus when the test is started.
tnTestHdPayLdEn… | column | Integer32 | .1.3.6.1.4.1.7483.7.2.2.2.17.1.6.1.20 |
| tnTestHdColorAware tnTestHdColorAware can be set to true to run when the test
is started to run color-aware tests. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.7.2.2.2.17.1.6.1.21 |
| tnTestHdStartTime tnTestHdStartTime test head start time sent in the trap
message | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.7483.7.2.2.2.17.1.6.1.3 |
| tnTestHdElapsedTime tnTestHdElapsedTime is the elapsed time since test head test
has started | column | seconds Integer32 | .1.3.6.1.4.1.7483.7.2.2.2.17.1.6.1.4 |
| tnTestHdFc tnTestHdFc is an optional parameter that needs to be
set along with tnTestHdAdminStatus to start a test head
test.If tnTestHdFc is not given along with
tnTestHdAdminStatus defaul… | column | TN-TC-MIBTFCName | .1.3.6.1.4.1.7483.7.2.2.2.17.1.6.1.5 |
| tnTestHdAvgLatency tnTestHdAvgLatency is the measured average latency in the
test head run. tnTestHdAvgLatency is sent in the trap upon
test completion | column | microseconds Integer32 | .1.3.6.1.4.1.7483.7.2.2.2.17.1.6.1.6 |
| tnTestHdFrLossRatio tnTestHdFrLossRatio is the measured frame loss ratio
in the test head run. tnTestHdFrLossRatio is sent in the
trap upon test completion | column | 10000th of a percent Integer32 | .1.3.6.1.4.1.7483.7.2.2.2.17.1.6.1.7 |
| tnTestHdJitter tnTestHdJitter is the measured jitter in the test head run.
tnTestHdJitter is sent in the trap upon test completion | column | microseconds Integer32 | .1.3.6.1.4.1.7483.7.2.2.2.17.1.6.1.8 |
| tnTestHdDsiredThrpt tnTestHdDsiredThrpt is the desired through put in the test head
run. tnTestHdDsiredThrpt is sent in the trap upon test completion | column | Integer32 | .1.3.6.1.4.1.7483.7.2.2.2.17.1.6.1.9 |