vRtrMplsGeneralOperState
TN-MPLS-MIB ·
.1.3.6.1.4.1.7483.6.1.2.6.7.1.3
Object
column
TN-TC-MIBTmnxOperState
vRtrMplsGeneralOperState indicates the current operating state of this MPLS protocol instance on this router.
Context
- MIB
- TN-MPLS-MIB
- OID
.1.3.6.1.4.1.7483.6.1.2.6.7.1.3- Type
- column
- Access
- readonly
- Status
- current
- Parent
- vRtrMplsGeneralEntry
- Table
- vRtrMplsGeneralTable
- Siblings
- 34
Values & Constraints
Type Values
1 | unknown |
2 | inService |
3 | outOfService |
4 | transition |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vRtrMplsGeneralLastChange The sysUpTime when this row was last modified. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.7483.6.1.2.6.7.1.1 |
| vRtrMplsGeneralHoldTimer The value of vRtrMplsGeneralHoldTimer specifies the time, in
seconds, for which the ingress node holds a bit before
programming its data plane and declaring the lsp up to
the serv… | column | seconds Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.6.7.1.10 |
| vRtrMplsGeneralDynamicBypass The value of vRtrMplsGeneralDynamicBypass specifies whether
dynamic bypass tunnels are enabled.
By default, dynamic bypass tunnels are enabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.6.1.2.6.7.1.11 |
| vRtrMplsGeneralNextResignal The value of vRtrMplsGeneralNextResignal indicates the time
remaining, in minutes, for the vRtrMplsGeneralResignalTimer to expire. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.6.1.2.6.7.1.12 |
| vRtrMplsGeneralOperDownReason The value of vRtrMplsGeneralOperDownReason indicates the reason
due to which the MPLS instance is operationally down. | column | TmnxMplsOperDownReasonCode | .1.3.6.1.4.1.7483.6.1.2.6.7.1.13 |
| vRtrMplsGeneralSrlgFrr The value of vRtrMplsGeneralSrlgFrr specifies whether Shared Risk
Link Group (SRLG) constraint will be used in the computation of
FRR bypass or detour to be associated with any pr… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.6.1.2.6.7.1.14 |
| vRtrMplsGeneralSrlgFrrStrict The value of vRtrMplsGeneralSrlgFrrStrict specifies whether
to associate the LSP with a bypass or signal a detour if a
bypass or detour satisfies all other constraints except the … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.6.1.2.6.7.1.15 |
| vRtrMplsGeneralNewP2mpInstIndex The value of vRtrMplsGeneralNewP2mpInstIndex specifies the object that is used to assign
values to vRtrMplsP2mpInstIndex as described in 'Textual Conventions for SNMPv2'. The
net… | column | SNMPv2-TCTestAndIncr | .1.3.6.1.4.1.7483.6.1.2.6.7.1.16 |
| vRtrMplsGeneralLeastFillMinThd The value of vRtrMplsGeneralLeastFillMinThd specifies in percentage the least
minimum threshold parameter used in the least-fill path selection process. When
comparing the percent… | column | Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.6.7.1.17 |
| vRtrMplsGenLeastFillReoptiThd The value of vRtrMplsGenLeastFillReoptiThd specifies in percentage the least
reoptimization threshold parameter used in the least-fill path selection process.
Durin… | column | Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.6.7.1.18 |
| vRtrMplsGeneralUseSrlgDB The value of vRtrMplsGeneralUseSrlgDB specifies whether the use of the user SRLG
database by CSPF is enabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.6.1.2.6.7.1.19 |
| vRtrMplsGeneralAdminState When vRtrMplsGeneralAdminState is set to 'inService', the agent
attempts to enable the MPLS protocol instance on this router.
When vRtrMplsGeneralAdminState is set … | column | TN-TC-MIBTmnxAdminState | .1.3.6.1.4.1.7483.6.1.2.6.7.1.2 |
| vRtrMplsGeneralP2mpResigTimer The value of vRtrMplsGeneralP2mpResigTimer specifies the value
for the P2MP (point to multi point) LSP resignal timer, that is the time,
in minutes, the software will wait before … | column | minutes Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.6.7.1.20 |
| vRtrMplsGeneralP2mpNextResignal The value of vRtrMplsGeneralP2mpNextResignal indicates the time
remaining, in minutes, for the vRtrMplsGeneralP2mpResigTimer to expire. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.6.1.2.6.7.1.21 |
| vRtrMplsGeneralSecFastRetryTimer The value of vRtrMplsGeneralSecFastRetryTimer specifies the value, in
seconds, used as fast retry timer for a secondary path. If the first
attempt to setup a secondary path fails … | column | seconds Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.6.7.1.22 |
| vRtrMplsGeneralShortTTLPropLocal The value of vRtrMplsGeneralShortTTLPropLocal specifies whether or not
to enable the propagation of time to live (TTL) from the IP packet
header into the header of the resulting M… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.6.1.2.6.7.1.23 |
| vRtrMplsGeneralShortTTLPropTrans The value of vRtrMplsGeneralShortTTLPropTrans specifies whether or not
to enable the propagation of time to live (TTL) from the IP packet
header into the header of the resulting M… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.6.1.2.6.7.1.24 |
| vRtrMplsGeneralStaticLspFRTimer The value of vRtrMplsGeneralStaticLspFRTimer specifies the audit time
for static LSPs which are not currently up. | column | seconds Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.6.7.1.25 |
| vRtrMplsGeneralAutoBWDefSampMul The value of vRtrMplsGeneralAutoBWDefSampMul specifies the global
default for collection intervals in a sample interval. | column | Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.6.7.1.26 |
| vRtrMplsGeneralAutoBWDefAdjMul The value of vRtrMplsGeneralAutoBWDefAdjMul specifies the global
default for collection intervals in an adjust interval. | column | Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.6.7.1.27 |
| vRtrMplsGeneralExpBackoffRetry The value of vRtrMplsGeneralExpBackoffRetry specifies the state of
Exponential Backoff Retry mechanism. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.6.1.2.6.7.1.28 |
| vRtrMplsGeneralCspfOnLooseHop The value of vRtrMplsGeneralCspfOnLooseHop specifies whether the
Constrained Shortest Path First (CSPF) calculation till the next
loose hop is enabled or not. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.6.1.2.6.7.1.29 |
| vRtrMplsGeneralP2PMaxByPassAssoc The value of vRtrMplsGeneralP2PMaxByPassAssoc specifies the maximum
number of LSP primary paths that can associate with each manual or
dynamic bypass point-to-point (P2P) LSP. | column | Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.6.7.1.30 |
| vRtrMplsGenP2pActPathFastRetry The value of vRtrMplsGenP2pActPathFastRetry specifies the time, in
seconds, active path point-to-point (P2P) LSP waits before it attempts
to re-establish itself. This timer is sta… | column | seconds Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.6.7.1.31 |
| vRtrMplsGenP2mpS2lFastRetry The value of vRtrMplsGenP2mpS2lFastRetry specifies the time, in
seconds, active path point to multipoint (P2MP) source to leaf (S2L)
LSP waits before it attempts to re-establish i… | column | seconds Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.6.7.1.32 |
| vRtrMplsGenLspInitRetryTimeout The value of vRtrMplsGenLspInitRetryTimeout specifies the amount of
time in seconds the software waits for an LSP path to come up after
sending out the initial Path message. If th… | column | seconds Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.6.7.1.33 |
| vRtrMplsLoggerEventBundling The value of vRtrMplsLoggerEventBundling specifies whether or not
the notification bundling mechanism is enabled.
When the value of vRtrMplsLoggerEventBundling is s… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.6.1.2.6.7.1.34 |
| vRtrMplsGenIssuMplsLockdown The value of vRtrMplsGenIssuMplsLockdown indicates if MPLS has entered
the state of not accepting new requests for creation of
LSP's(local/transit) during the minor ISSU(In Servic… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.6.1.2.6.7.1.39 |
| vRtrMplsGeneralPropagateTtl When vRtrMplsGeneralPropagateTtl is set to 'true', for all LSPs,
the ingress ESR writes the TTL of the IP packet in the label and
each transit ESR decrements the TTL in the label.… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.6.1.2.6.7.1.4 |
| vRtrMplsGeneralTE The value of vRtrMplsGeneralTE specifies the type of traffic
engineering used with this MPLS instance. | column | Enumeration | .1.3.6.1.4.1.7483.6.1.2.6.7.1.5 |
| vRtrMplsGeneralNewLspIndex This object is used to assign values to vRtrMplsLspIndex as
described in 'Textual Conventions for SNMPv2'. The network
manager reads the object, and then writes the value back
in… | column | SNMPv2-TCTestAndIncr | .1.3.6.1.4.1.7483.6.1.2.6.7.1.6 |
| vRtrMplsGeneralOptimizeTimer The value of vRtrMplsGeneralOptimizeTimer specifies the time, in
seconds, the software will wait before attempting to re-optimize
the LSPs.
When CSPF is enabled, ch… | column | seconds Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.6.7.1.7 |
| vRtrMplsGeneralFRObject The value of vRtrMplsGeneralFRObject specifies whether fast reroute,
for LSPs using 'Facility Backup', is signalled with or without the
fast reroute object. The value of vRtrMplsG… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.6.1.2.6.7.1.8 |
| vRtrMplsGeneralResignalTimer The value of vRtrMplsGeneralResignalTimer specifies the value
for the P2P (point-to-point) LSP resignal timer, that is the time, in minutes, the
software will wait before attempti… | column | minutes Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.6.7.1.9 |