tnMcLagConfigLagSystemId
TN-MC-REDUNDANCY-MIB ·
.1.3.6.1.4.1.7483.6.1.2.40.1.8.1.5
Object
column
r/w
OctetString
The value of tnMcLagConfigLagSystemId specifies the system-id to be
used in the context of mc-lag operation. The partner system will
consider all ports using the same system-id, system priority and
lacp-key as part of the same lag.
In order to achieve this in mc-lag operation, both systems have to be
configured with the same values.
As long as the system does not have the connection with its
redundant peer, it will use the locally defined value (chassis MAC
address). After detecting a redundant node failure, the previously
active system will keep on using the system-id configured here, while
the standby system will switch to its locally defined value.
The value of this object must be all zeroes when the value of
tLagStandbySignaling of the corresponding LAG is 'powerOff (2)'.
The value of this object cannot be all zeroes when the value of
tLagStandbySignaling of the corresponding LAG is 'lacp (1)'.
Context
- MIB
- TN-MC-REDUNDANCY-MIB
- OID
.1.3.6.1.4.1.7483.6.1.2.40.1.8.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- tnMcLagConfigLagEntry
- Table
- tnMcLagConfigLagTable
- Siblings
- 9
Syntax
OctetString
Values & Constraints
Object Constraints
range: 6-6
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tnMcLagConfigLagId The value of tnMcLagConfigLagId identifies the Link Aggregation
Group on this system that is to form a mc-lag configuration with the
indicated peer. | column | TN-LAG-MIBLAGInterfaceNumber | .1.3.6.1.4.1.7483.6.1.2.40.1.8.1.1 |
| tnMcLagConfigLagFlushEthRingOnActive The value of tnMcLagConfigLagFlushEthRingOnActive specifies whether
or not to flush the ethernet rings to which the services that the LAG
is part of are attached. | column | TN-TC-MIBTmnxEnabledDisabled | .1.3.6.1.4.1.7483.6.1.2.40.1.8.1.10 |
| tnMcLagConfigLagLastChanged The value of tnMcLagConfigLagLastChanged indicates the sysUpTime
at the time of the last modification of this entry.
If no changes were made to the entry since the … | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.7483.6.1.2.40.1.8.1.2 |
| tnMcLagConfigLagRowStatus The value of tnMcLagConfigLagRowStatus specifies the row status of
this row. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.7483.6.1.2.40.1.8.1.3 |
| tnMcLagConfigLaglacpKey The value of tnMcLagConfigLaglacpKey specifies a 16bit key that
needs to be configured in the same manner on both sides of the mc-lag
in order for the mc-lag to come up.
… | column | Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.40.1.8.1.4 |
| tnMcLagConfigLagSystemPriority The value of tnMcLagConfigLagSystemPriority specifies the system
priority to be used in the context of mc-lag. The partner system will
consider all ports using the same system-id… | column | Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.40.1.8.1.6 |
| tnMcLagConfigLagRemoteLagId The value of tnMcLagConfigLagRemoteLagId specifies the Lag ID on the
remote system.
If not specified, the value of this object will be set to the value of
tnMcLagCo… | column | TN-LAG-MIBLAGInterfaceNumber | .1.3.6.1.4.1.7483.6.1.2.40.1.8.1.7 |
| tnMcLagConfigLagSrcBMacLSB The value of tnMcLagConfigLagSrcBMacLSB specifies the value of last
16-bits of the MAC address used for all the traffic ingressing the
MC-Lag links.
The value '4294… | column | Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.40.1.8.1.8 |
| tnMcLagConfigLagOperSrcBMacLSB The value of tnMcLagConfigLagOperSrcBMacLSB indicates the operational
value of last 16-bits of the MAC address used for all the traffic
ingressing the MC-Lag links. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.6.1.2.40.1.8.1.9 |