tnEthRingSubRingInterconnectId
TN-ETH-RING-MIB ·
.1.3.6.1.4.1.7483.6.1.2.72.1.1.1.17
Object
column
r/w
Unsigned32
The value of tnEthRingSubRingInterconnectId specifies whether the
Ethernet sub-ring is interconnected to an Ethernet Ring, as identified
by the Ethernet Ring ID, a VPLS service (4294967295), or is not
interconnected (0).
A sub-ring can only be interconnected to a VPLS service
(i.e. tnEthRingSubRingInterconnectId assigned the value 4294967295),
if tnEthRingSubRingType is assigned the value 'nonVirtualLink (2)'.
This object MUST be set to a value other than zero (0) for
tnEthRingSubRingPropTopChange to be modified away from its default
value.
Attempts to modify this object away from its default value when
tnEthRingSubRingType is set to 'none (0)' will result in an SNMP
inconsistentValue error.
Context
- MIB
- TN-ETH-RING-MIB
- OID
.1.3.6.1.4.1.7483.6.1.2.72.1.1.1.17- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- tnEthRingConfigEntry
- Table
- tnEthRingConfigTable
- Siblings
- 20
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 0-4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tnEthRingIndex The value of tnEthRingIndex specifies the row index of the Ethernet
Ring Group. | column | Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.72.1.1.1.1 |
| tnEthRingCcmHoldDownTime The value of tnEthRingCcmHoldDownTime specifies the time, in
centiseconds, used for the hold-timer for associated Continuity Check
(CC) Session down event dampening. This guards a… | column | centiseconds Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.72.1.1.1.10 |
| tnEthRingCcmHoldUpTime The value of tnEthRingCcmHoldUpTime specifies the time, in
deciseconds, used for the hold-timer for associated Continuity Check
(CC) Session up event dampening. This guards agains… | column | deciseconds Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.72.1.1.1.11 |
| tnEthRingRplNode The value of tnEthRingRplNode specifies the Ring Protection Link
(RPL) type of the Ethernet Ring Node. | column | TnEthRingRplNodeType | .1.3.6.1.4.1.7483.6.1.2.72.1.1.1.12 |
| tnEthRingNodeId The value of tnEthRingNodeId specifies the Ethernet Ring Node ID
The default value is the system's MAC address.
Writing the MAC address value 00:00:0… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.7483.6.1.2.72.1.1.1.13 |
| tnEthRingTxApsPdu The value of tnEthRingTxApsPdu indicates the contents of the R-APS
PDU transmitted on the Ethernet Ring. | column | TnEthRingApsInfoType | .1.3.6.1.4.1.7483.6.1.2.72.1.1.1.14 |
| tnEthRingDefectStatus The value of tnEthRingDefectStatus indicates what defects are
active on the Ethernet Ring.
The defects are defined as:
dFopPM -- Provisioning Mismatch | column | Bits | .1.3.6.1.4.1.7483.6.1.2.72.1.1.1.15 |
| tnEthRingSubRingType The value of tnEthRingSubRingType specifies whether this Ethernet
Ring is a sub-ring or not. A value of 'none (0)' specifies that the
Ethernet Ring is not a sub-ring. A value 'vir… | column | Enumeration | .1.3.6.1.4.1.7483.6.1.2.72.1.1.1.16 |
| tnEthRingSubRingPropTopChange The value of tnEthRingSubRingPropTopChange specifies whether or not
the Ethernet sub-ring propagates topology changes to the interconnected
ring as specified by the value of tnEth… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.6.1.2.72.1.1.1.18 |
| tnEthRingCompatibleVersion The value of tnEthRingCompatibleVersion specifies the backward
compatibility logic for the Ethernet Ring.
If this object is set to 'version1 (1)' then:
1. Attem… | column | Enumeration | .1.3.6.1.4.1.7483.6.1.2.72.1.1.1.19 |
| tnEthRingRowStatus The value of tnEthRingRowStatus controls the creation and deletion of
row entries in the tnEthRingConfigTable. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.7483.6.1.2.72.1.1.1.2 |
| tnEthRingState The value of tnEthRingState indicates the current state of ERP instance, valid on all ERP Ring nodes.
It is a combination of ERP Instance activation state and the state of the ERP… | column | Enumeration | .1.3.6.1.4.1.7483.6.1.2.72.1.1.1.20 |
| tnEthRingAlmProfName Alarm profile for ethernet ring. | column | OctetString | .1.3.6.1.4.1.7483.6.1.2.72.1.1.1.21 |
| tnEthRingTimeStamp The value of tnEthRingTimeStamp indicates the time, since system
startup, of the last change to this row. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.7483.6.1.2.72.1.1.1.3 |
| tnEthRingDescription The value of tnEthRingDescription specifies the user supplied
description of the Ethernet Ring. | column | TN-TC-MIBTItemDescription | .1.3.6.1.4.1.7483.6.1.2.72.1.1.1.4 |
| tnEthRingAdminState The value of tnEthRingAdminState specifies the administrative state
of the Ethernet Ring. | column | TN-TC-MIBTmnxAdminState | .1.3.6.1.4.1.7483.6.1.2.72.1.1.1.5 |
| tnEthRingOperState The value of tnEthRingOperState indicates the operational state of
the Ethernet Ring. | column | TN-TC-MIBTmnxOperState | .1.3.6.1.4.1.7483.6.1.2.72.1.1.1.6 |
| tnEthRingGuardTime The value of tnEthRingGuardTime specifies the guard timer, in
deciseconds, of a Ring-APS (R-APS) node.
The guard timer is used to prevent the Ethernet Ring node fro… | column | deciseconds Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.72.1.1.1.7 |
| tnEthRingRevertTime The value of tnEthRingRevertTime specifies the Wait-To-Restore (WTR)
timer, in seconds, of a Ring-APS (R-APS) node.
The WTR timer is used to prevent frequent operat… | column | seconds Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.72.1.1.1.8 |
| tnEthRingRevertTimeCountDn The value of tnEthRingRevertTimeCountDn indicates the remaining time,
in seconds, before the Ethernet Ring can revert to its original state. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.6.1.2.72.1.1.1.9 |