vrrpOperationsRowStatus
TIMETRA-VRRP-V3-MIB ·
.1.3.6.1.2.1.68.1.7.1.14
Object
The RowStatus variable should be used in accordance to installation
and removal conventions for conceptual rows. When
`vrrpOperationsRowStatus' is set to active(1), no other objects in the
conceptual row can be modified.
To create a row in this table, a manager sets this object to either
createAndGo(4) or createAndWait(5). Until instances of all
corresponding columns are appropriately configured, the value of the
corresponding instance of the `vrrpOperationsRowStatus' column will be
read as notReady(3). In particular, a newly created row cannot be made
active(1) until (minimally) the corresponding instance of
vrrpOperationsInetAddrType, vrrpOperationsVrId and
vrrpOperationsPrimaryIpAddr has been set and there is at least one
active row in the `vrrpAssociatedIpAddrTable' defining an associated
IP address.
notInService(2) should be used to administratively bring the row down.
A typical order of operation to add a row is: 1. Create a row in
vrrpOperationsTable with createAndWait(5). 2. Create one or more
corresponding rows in vrrpAssociatedIpAddrTable. 3. Populate the
vrrpOperationsEntry. 4. set vrrpOperationsRowStatus to active(1).
A typical order of operation to delete an entry is: 1. Set
vrrpOperationsRowStatus to notInService(2). 2. Set the corresponding
rows in vrrpAssociatedIpAddrTable to destroy(6) to delete the entry.
3. set vrrpOperationsRowStatus to destroy(6) to delete the entry.
Context
- MIB
- TIMETRA-VRRP-V3-MIB
- OID
.1.3.6.1.2.1.68.1.7.1.14- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- vrrpOperationsEntry
- Table
- vrrpOperationsTable
- Siblings
- 13
Values & Constraints
Type Values
1 | active |
2 | notInService |
3 | notReady |
4 | createAndGo |
5 | createAndWait |
6 | destroy |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vrrpOperationsInetAddrType The IP address type of VrrpOperationsEntry. This value applies to both
vrrpOperationsMasterIpAddr and vrrpOperationsPrimaryIpAddr. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.2.1.68.1.7.1.1 |
| vrrpOperationsPreemptMode Controls whether a higher priority virtual router will preempt a lower
priority master. | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.68.1.7.1.10 |
| vrrpOperationsAcceptMode Controls whether a virtual router in Master state
will accept packets addressed to the address owner's
IPv6 address as its own if it is not the IPv6 address
owner. Default is Fal… | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.68.1.7.1.11 |
| vrrpOperationsUpTime This is the value of the `sysUpTime' object when this virtual router
(i.e., the `vrrpOperationsState') transitioned out of `initialized'. | column | SNMPv2-TCTimeStamp | .1.3.6.1.2.1.68.1.7.1.12 |
| vrrpOperationsStorageType The storage type for this conceptual row. Write access is not
required. It is optional to support nonVolatile StorageType
enumeration. | column | SNMPv2-TCStorageType | .1.3.6.1.2.1.68.1.7.1.13 |
| vrrpOperationsVrId This object contains the Virtual Router Identifier (VRID). | column | VRRP-MIBVrId | .1.3.6.1.2.1.68.1.7.1.2 |
| vrrpOperationsVirtualMacAddr The virtual MAC address of the virtual router. Although this object
can be derived from the 'vrrpOperationsVrId' object, it is defined so
that it is easily obtainable by a managem… | column | SNMPv2-TCMacAddress | .1.3.6.1.2.1.68.1.7.1.3 |
| vrrpOperationsState The current state of the virtual router. This object has three defined
values:
- `initialize', which indicates that the
virtual router is waiting for a startu… | column | Enumeration | .1.3.6.1.2.1.68.1.7.1.4 |
| vrrpOperationsPriority This object specifies the priority to be used for the
virtual router master election process. Higher values
imply higher priority.
A priority of '0', although not … | column | Unsigned32 | .1.3.6.1.2.1.68.1.7.1.5 |
| vrrpOperationsAddrCount The number of IP addresses that are associated with
this virtual router. This number is equal to the
number of rows in the vrrpAssociatedIpAddrTable that
correspond to a given IP… | column | Integer32 | .1.3.6.1.2.1.68.1.7.1.6 |
| vrrpOperationsMasterIpAddr The master router's real IP address. Master router would set this
address to vrrpOperationsPrimaryIpAddr while transitioning to master
state. For backup routers, this is the IP ad… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.2.1.68.1.7.1.7 |
| vrrpOperationsPrimaryIpAddr In the case where there are more than one IP Address (associated IP
addresses) for a given `ifIndex', this object is used to specify the
IP address that will become the 'vrrpOpera… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.2.1.68.1.7.1.8 |
| vrrpOperationsAdvInterval The time interval, in centiseconds, between sending advertisement
messages. Only the master router sends VRRP advertisements. | column | centiseconds Integer32 | .1.3.6.1.2.1.68.1.7.1.9 |