tmnxTacPlusInteractiveAuthen
TIMETRA-SECURITY-MIB ·
.1.3.6.1.4.1.6527.3.1.2.22.7.11
Object
The value of tmnxTacPlusInteractiveAuthen specifies whether
interactive authentication is enabled.
If the value of this object is set to 'true(1)', no username nor
password is sent in the TACACS+ authentication START message, and the
server_msg in the TAC_PLUS_AUTHEN_STATUS_GETUSER and
TAC_PLUS_AUTHEN_STATUS_GETPASS authentication REPLY messages from the
TACACS+ server are displayed. The server_msg may contain an S/Key for
one-time password operation.
If the value of this object is set to 'false(2)', the username and
password are sent in the TACACS+ authentication START message.
Context
- MIB
- TIMETRA-SECURITY-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.22.7.11- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- tmnxTacPlusInfo
- Siblings
- 11
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tmnxTacPlusAdminStatus The desired administrative status of the Tacacs+ protocol operation. | scalar | Enumeration | .1.3.6.1.4.1.6527.3.1.2.22.7.1 |
| tmnxTacplusUseTemplate The value of tmnxTacplusUseTemplate specifies whether the TACACS+ user
template is actively applied to the TACACS+ user. When the value of
tmnxTacplusUseTemplate is set to 'true(1… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.22.7.10 |
| tmnxTacPlusAuthorUsePrivLvl The value of tmnxTacPlusAuthorUsePrivLvl specifies whether the
privilege level mapping is used.
When the value of tmnxTacPlusAuthorization is 'true(1)' and the value
of… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.22.7.12 |
| tmnxTacPlusTimeout Number of seconds to wait before timing out a Tacacs+ server. | scalar | Seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.22.7.2 |
| tmnxTacPlusServerTable The tmnxTacPlusServerEntry has an entry for each Tacacs+ server. The
table can have up to a maximum of 5 entries. | table | - | .1.3.6.1.4.1.6527.3.1.2.22.7.3 |
| tmnxTacPlusAccounting When the value of tmnxTacPlusAccounting is set to 'TRUE', TACACS+
command accounting is enabled. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.22.7.4 |
| tmnxTacPlusAcctRecType tmnxTacPlusAcctRecType is used to configure the type of accounting
record packet that is to be sent to the TACACS+ server. The value
indicates whether TACACS+ accounting start and… | scalar | Enumeration | .1.3.6.1.4.1.6527.3.1.2.22.7.5 |
| tmnxTacPlusAuthorization When the value of tmnxTacPlusAuthorization is set to 'TRUE', TACACS+
command authorization is enabled. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.22.7.6 |
| tmnxTacPlusSingleConnection obsolete When the value of tmnxTacPlusSingleConnection is set to 'TRUE', a
single connection is established with the TACACS+ server. The
connection is kept open and is used by all the TELN… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.22.7.7 |
| tmnxTacPlusSourceAddress obsolete tmnxTacPlusSourceAddress is used to configure the source address of
the TACACS+ packet. It should be a valid unicast address.
If this object is configured with the addr… | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6527.3.1.2.22.7.8 |
| tmnxTacPlusConfigured obsolete When the value of tmnxTacPlusConfigured is set to 'false', all the
Tacplus objects under the tmnxTacPlusInfo tree will be set to their
default values and all the rows in the tmnxT… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.22.7.9 |