tmnxTacPlusEnableAdminPrivLvl
TIMETRA-SECURITY-MIB ·
.1.3.6.1.4.1.6527.3.1.2.22.5.16
Object
scalar
r/w
Integer32
The value of tmnxTacPlusEnableAdminPrivLvl specifies the privilege
level used when sending a TACACS+ ENABLE request.
When the value of tmnxTacPlusAuthorization is 'true(1)' and the value
of tmnxTacPlusAuthorUsePrivLvl is 'true(1)' and the value of
tmnxTacPlusInteractiveAuthen is 'true(1)', a TACACS+ authentication
request for the ENABLE service with this configured privilege level is
used instead of requesting tmnxAdminPassword when the user wants to
become a system administrator.
Context
- MIB
- TIMETRA-SECURITY-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.22.5.16- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- tmnxPasswordInfo
- Siblings
- 32
Syntax
Integer32
Values & Constraints
Object Constraints
range: -1-15
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tmnxPasswordAging Number of days a user password is valid before the user must change
his password. If the value of tmnxPasswordAging is set to '65535',
password aging is disabled. | scalar | Days Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.22.5.1 |
| tmnxPasswordAuthenExitOnReject If the value of tmnxPasswordAuthenExitOnReject is set to 'true' and if
one of the AAA methods configured in tmnxPasswordAuthenOrder1,
tmnxPasswordAuthenOrder2, tmnxPasswordAuthenO… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.22.5.10 |
| tmnxAdminPassword tmnxAdminPassword is used to configure the password which enables a
user to become a system administrator.
tmnxAdminPassword and tmnxAdminPasswordEncrypted, which indic… | scalar | OctetString | .1.3.6.1.4.1.6527.3.1.2.22.5.11 |
| tmnxAdminPasswordEncrypted When the value of tmnxAdminPasswordEncrypted is 'true', the password
specified by tmnxAdminPassword is in the encrypted form.
When the value of tmnxAdminPasswordEncrypt… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.22.5.12 |
| tmnxPasswordHealthCheck When the value of tmnxPasswordHealthCheck is 'true', the Radius
servers configured in tmnxRadiusServerTable and the 'TacPlus' servers
configured in tmnxTacPlusServerTable will be … | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.22.5.13 |
| tmnxPasswordHealthCheckInterval The value of tmnxPasswordHealthCheckInterval specifies the polling
interval for Radius servers configured in tmnxRadiusServerTable and
the 'TacPlus' servers configured in tmnxTacP… | scalar | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.22.5.14 |
| tmnxDynSvcPassword tmnxDynSvcPassword is used to configure the password which enables
manual modification of dynamic services.
The password can be provided both as a plain text string, or… | scalar | OctetString | .1.3.6.1.4.1.6527.3.1.2.22.5.15 |
| tmnxPasswordHistory The value of tmnxPasswordHistory specifies the number of old passwords
of the user that will be remembered. A new password must not be the
same as any remembered old password.
… | scalar | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.22.5.17 |
| tmnxPasswordMinChange The value of tmnxPasswordMinChange specifies the minimum number of
characters in the new password that must not be present in the old
password. This is calculated using the Levens… | scalar | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.22.5.18 |
| tmnxPasswordMinAge The value of tmnxPasswordMinAge specifies the number of seconds
required between two consecutive password changes.
Among other this will prevent the user from flooding … | scalar | Seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.22.5.19 |
| tmnxPasswordMinLength The minimum number of characters required in the password.
In addition to the number of characters in the new password, credit
(of +1 in length) will be given for each … | scalar | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.22.5.2 |
| tmnxPasswordAllowUserName The value of tmnxPasswordAllowUserName specifies if the new password
will be allowed if it contains the user name in some form. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.22.5.20 |
| tmnxPasswordMaxRepeatedChars The value of tmnxPasswordMaxRepeatedChars specifies the maximum number
of times the same character can be used consecutively in the password.
A value of zero (0) indica… | scalar | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.22.5.21 |
| tmnxPasswordCreditsLowerCase The value of tmnxPasswordCreditsLowerCase specifies the maximum credit
for having lowercase characters in your password. Please see
tmnxPasswordMinLength for an explanation of how… | scalar | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.22.5.22 |
| tmnxPasswordCreditsUpperCase The value of tmnxPasswordCreditsUpperCase specifies the maximum credit
for having uppercase characters in your password. Please see
tmnxPasswordMinLength for an explanation of how… | scalar | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.22.5.23 |
| tmnxPasswordCreditsNumeric The value of tmnxPasswordCreditsNumeric specifies the maximum credit
for having digits in your password. Please see tmnxPasswordMinLength
for an explanation of how password credit… | scalar | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.22.5.24 |
| tmnxPasswordCreditsSpecialChar The value of tmnxPasswordCreditsSpecialChar specifies the maximum
credit for having special characters in your password. Please see
tmnxPasswordMinLength for an explanation of how… | scalar | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.22.5.25 |
| tmnxPasswordReqLowerCase The value of tmnxPasswordReqLowerCase specifies the minimum number of
lowercase characters that must be present in your password.
A value of zero (0) indicates no lower… | scalar | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.22.5.26 |
| tmnxPasswordReqUpperCase The value of tmnxPasswordReqUpperCase specifies the minimum number of
uppercase characters that must be present in your password.
A value of zero (0) indicates no upper… | scalar | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.22.5.27 |
| tmnxPasswordReqNumeric The value of tmnxPasswordReqNumeric specifies the minimum number of
digits that must be present in your password.
A value of zero (0) indicates no digits are required.
… | scalar | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.22.5.28 |
| tmnxPasswordReqSpecialChar The value of tmnxPasswordReqSpecialChar specifies the minimum number
of special characters that must be present in your password.
A value of zero (0) indicates no digit… | scalar | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.22.5.29 |
| tmnxPasswordComplexity obsolete tmnxPasswordComplexity was made obsolete in 12.0 revision of Nokia
SROS series system. Password complexity is now configured using the
other fields in tmnxPasswordInfo. | scalar | Bits | .1.3.6.1.4.1.6527.3.1.2.22.5.3 |
| tmnxPasswordReqNumCharClass The value of tmnxPasswordReqNumCharClass specifies the minimum number
of distinct kind of characters (uppercase, lowercase, digit or
special) that must be present in your password… | scalar | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.22.5.30 |
| tmnxVsdPassword The tmnxVsdPassword is used to configure the password which enables
manual modification of VSD services.
The password can be provided both as a plain text string, or as… | scalar | OctetString | .1.3.6.1.4.1.6527.3.1.2.22.5.31 |
| tmnxPasswordAuthenOrder4 The least preferred method to authenticate and authorize a user. | scalar | TmnxPasswordAuthenOrder | .1.3.6.1.4.1.6527.3.1.2.22.5.32 |
| tmnxPasswordHashing Algorithm used for user password hashing. | scalar | TmnxPassHashType | .1.3.6.1.4.1.6527.3.1.2.22.5.33 |
| tmnxPasswordAttemptsCount The maximum number of unsuccessful login attempts allowed for a user.
The value of tmnxPasswordAttemptsCount is used with the value of
tmnxPasswordAttemptsTime to find out if the … | scalar | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.22.5.4 |
| tmnxPasswordAttemptsTime This is used in conjunction with tmnxPasswordAttemptsCount to find out
if the user is to be locked out for tmnxPasswordAttemptsLockoutPeriod. | scalar | Minutes Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.22.5.5 |
| tmnxPasswordAttemptsLockoutPeriod The number of minutes the user is locked out if the threshold of
unsuccessful login attempts has exceeded. | scalar | Minutes Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.22.5.6 |
| tmnxPasswordAuthenOrder1 The most preferred method to authenticate and authorize a user. If
this method fails, the next method in the sequence identified by
tmnxPasswordAuthenOrder2 is used. | scalar | TmnxPasswordAuthenOrder | .1.3.6.1.4.1.6527.3.1.2.22.5.7 |
| tmnxPasswordAuthenOrder2 The second method to authenticate and authorize a user. | scalar | TmnxPasswordAuthenOrder | .1.3.6.1.4.1.6527.3.1.2.22.5.8 |
| tmnxPasswordAuthenOrder3 The third preferred method to authenticate and authorize a user. | scalar | TmnxPasswordAuthenOrder | .1.3.6.1.4.1.6527.3.1.2.22.5.9 |