tSapIngressQosClassifiersRequiredInEpipe
TIMETRA-SAS-QOS-MIB ·
.1.3.6.1.4.1.6527.6.2.2.2.1.2.4.1.5
Object
column
SNMPv2-SMIUnsigned32
This value indicates the number of ingress QoS classifiers required when this policy is applied on a SAP. This value is calculated based on the number of classifiers required for a EPIPE SAP.
Context
- MIB
- TIMETRA-SAS-QOS-MIB
- OID
.1.3.6.1.4.1.6527.6.2.2.2.1.2.4.1.5- Type
- column
- Access
- readonly
- Status
- current
- Parent
- tSapIngressExtnEntry
- Table
- tSapIngressExtnTable
- Siblings
- 14
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tSapIngressNumQosClassifiers The number of ingress QoS classifiers to be allocated
to the SAP on which this policy is applied. The number
of QoS classifiers required by a SAP ingress QoS policy
should be l… | column | Unsigned32 | .1.3.6.1.4.1.6527.6.2.2.2.1.2.4.1.1 |
| tSapIngressDefaultFCProfile tSapIngressDefaultFCProfile specifies the profile for
the default fc | column | TProfileOrDei | .1.3.6.1.4.1.6527.6.2.2.2.1.2.4.1.10 |
| tSapIngressIPv6CriteriaEnable tSapIngressIPv6CriteriaEnable is a boolean
flag which allows/disallows configuring match criteria
based on ipv6 address | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.6.2.2.2.1.2.4.1.11 |
| tSapIngressIPv6CriteriaMatch This object specifies the basic match criteria as 'any' or 'dscp-only'
based on ipv6. The default value is 'dscp-only' | column | Enumeration | .1.3.6.1.4.1.6527.6.2.2.2.1.2.4.1.12 |
| tSapIngressIPMacMatch This object specifies the basic match criteria whether to match
ip or mac criteria first | column | Enumeration | .1.3.6.1.4.1.6527.6.2.2.2.1.2.4.1.13 |
| tSapIngressQosClassifiersRequiredInIes This value indicates the number of ingress QoS classifiers
required when this policy is applied on a SAP. This value is
calculated based on the number of classifiers required fo… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.6.2.2.2.1.2.4.1.14 |
| tSapIngressQosMetersRequiredInIes This value indicates the number of ingress QoS classifiers
required when this policy is applied on a SAP. This value is
calculated based on the number of classifiers required fo… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.6.2.2.2.1.2.4.1.15 |
| tSapIngressQosClassifiersUsed obsolete This value indicates the number of ingress QoS classifiers
required when this policy is applied on a SAP. This value is
calculated based on the number of classifiers required fo… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.6.2.2.2.1.2.4.1.2 |
| tSapIngressQosMetersUsed obsolete This value indicates the number of ingress QoS meters required
when this policy is applied on a SAP. This value is calculated
based on the number of meters required for a VPLS … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.6.2.2.2.1.2.4.1.3 |
| tSapIngressQosClassifiersRequiredInVpls This value indicates the number of ingress QoS classifiers
required when this policy is applied on a SAP. This value is
calculated based on the number of classifiers required fo… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.6.2.2.2.1.2.4.1.4 |
| tSapIngressQosMetersRequiredInVpls This value indicates the number of ingress QoS meters required
when this policy is applied on a SAP. This value is calculated
based on the number of meters required for a VPLS … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.6.2.2.2.1.2.4.1.6 |
| tSapIngressQosMetersRequiredInEpipe This value indicates the number of ingress QoS meters required
when this policy is applied on a SAP. This value is calculated
based on the number of meters required for a EPIPE… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.6.2.2.2.1.2.4.1.7 |
| tSapIngressIPCriteriaMatch This object specifies the basic match criteria as 'any' or 'dscp-only'
based on ip. The default value is 'dscp-only' | column | Enumeration | .1.3.6.1.4.1.6527.6.2.2.2.1.2.4.1.8 |
| tSapIngressMacCriteriaMatch This object specifies the basic match criteria as 'any' or 'dot1p-only'
based on Mac Address. The default value is 'any' | column | Enumeration | .1.3.6.1.4.1.6527.6.2.2.2.1.2.4.1.9 |