vRtrRsvpIfRefreshTime
TIMETRA-RSVP-MIB ·
.1.3.6.1.4.1.6527.3.1.2.7.3.1.8
Object
column
obsolete
r/w
seconds Unsigned32
The value of vRtrRsvpIfRefreshTime controls the interval between the
successive Path and Resv refresh messages. RSVP declares the session
down after it misses ((keep-multiplier + 0.5) * 1.5 * refresh-time))
consecutive refresh messages.
When the value of vRtrRsvpIfRefreshTime is set to zero (0), the value
of vRtrRsvpGeneralRefreshTime is applied to that specific RSVP
interface.
Context
- MIB
- TIMETRA-RSVP-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.7.3.1.8- Type
- column
- Access
- readwrite
- Status
- obsolete
- Units
- seconds
- Parent
- vRtrRsvpIfEntry
- Table
- vRtrRsvpIfTable
- Siblings
- 48
Syntax
seconds Unsigned32
Values & Constraints
Object Constraints
range: 0-65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vRtrRsvpIfLastEnabledTime The vRtrRsvpIfLastEnabledTime variable contains the sysUpTime value
when rsvpIfEnabled was last set to enabled (1) to run the RSVP
protocol on this interface. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.3.1.2.7.3.1.1 |
| vRtrRsvpIfActiveSessionCount The total number of active RSVP sessions on this interface. This count
includes sessions that have requested bandwidth as well as sessions
that have not requested any bandwidth. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6527.3.1.2.7.3.1.10 |
| vRtrRsvpIfActiveReservationCount The total number of active RSVP sessions that have reserved bandwidth. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6527.3.1.2.7.3.1.11 |
| vRtrRsvpIfTotalSessionCount The total number of RSVP sessions on this interface. This count
includes sessions that are active as well as sessions that have been
signalled but a response has not yet been rece… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6527.3.1.2.7.3.1.12 |
| vRtrRsvpIfBandwidth The value of vRtrRsvpIfBandwidth indicates the interface bandwidth in
megabits per second (Mbps) for the RSVP protocol on this interface.
This is typically the port Speed. | column | megabps SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.7.3.1.13 |
| vRtrRsvpIfReservedBandwidth obsolete The value of vRtrRsvpIfReservedBandwidth indicates the amount of
bandwidth in megabits per second (Mbps) to reserved by the
RSVP sessions on this interface. A value of zero (0) i… | column | megabps SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.7.3.1.14 |
| vRtrRsvpIfAuthentication The value of vRtrRsvpIfAuthentication specifies whether authentication
is enabled. When the value is 'true', authentication using MD5 message
based digest protocol is enabled and … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.7.3.1.15 |
| vRtrRsvpIfAuthChallenge obsolete The value of vRtrRsvpIfAuthChallenge specifies if RSVP integrity
challenge/response handshake is to be performed with RSVP neighbors.
By default, integrity handshak… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.7.3.1.16 |
| vRtrRsvpIfAuthKeyId The value of vRtrRsvpIfAuthKeyId indicates a number that must be
unique for a given sender. A locally unique key identifier is
generated using some combination of the address of … | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.6527.3.1.2.7.3.1.17 |
| vRtrRsvpIfAuthRxSeqNum The value of vRtrRsvpIfAuthRxSeqNum indicates a monotonically
increasing, unique sequence number for the receiver. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.6527.3.1.2.7.3.1.18 |
| vRtrRsvpIfAuthTxSeqNum The value of vRtrRsvpIfAuthTxSeqNum indicates a monotonically
increasing, unique sequence number for the sender. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.6527.3.1.2.7.3.1.19 |
| vRtrRsvpIfVRtrIfIndex The vRtrRsvpIfVRtrIfIndex contains the value of vRtrIfIndex for the
entry in the vRtrIfTable associated with this RSVP interface. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.6527.3.1.2.7.3.1.2 |
| vRtrRsvpIfAuthWindowSize The value of vRtrRsvpIfAuthWindowSize indicates the receiver's
tolerance to out-of-order message delivery. At the receiver,
packets reordered within vRtrRsvpIfAuthWindowSize woul… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6527.3.1.2.7.3.1.20 |
| vRtrRsvpIfRefreshReduction The value of vRtrRsvpIfRefreshReduction specifies whether the use
of the RSVP overhead refresh reduction capabilities on this RSVP
interface is enabled. When the value of vRtrRsv… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.7.3.1.21 |
| vRtrRsvpIfReliableDelivery The value of vRtrRsvpIfReliableDelivery specifies whether reliable
delivery of RSVP messages over the RSVP interface is enabled. When
the value of vRtrRsvpIfReliableDelivery is '… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.7.3.1.22 |
| vRtrRsvpIfBfdEnabled The value of vRtrRsvpIfBfdEnabled specifies whether Bi-directional
Forwarding Detection is enabled on this RSVP interface.
When the value is 'true', this RSVP inter… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.7.3.1.23 |
| vRtrRsvpIfGracefulShutdown The value of vRtrRsvpIfGracefulShutdown specifies whether graceful
shutdown of the RSVP interface is enabled. When this object has a
value of 'true', graceful shutdown is enabled … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.7.3.1.24 |
| vRtrRsvpIfDSTECt0BwPercent The value of vRtrRsvpIfDSTECt0BwPercent specifies the percentage
of link bandwidth for class type (CT) 0. A bandwidth percentage
is specified for each Class Type and the sum of a… | column | TmnxRsvpDSTEBwPercent | .1.3.6.1.4.1.6527.3.1.2.7.3.1.25 |
| vRtrRsvpIfDSTECt1BwPercent The value of vRtrRsvpIfDSTECt1BwPercent specifies the percentage link
bandwidth for CT 1. | column | TmnxRsvpDSTEBwPercent | .1.3.6.1.4.1.6527.3.1.2.7.3.1.26 |
| vRtrRsvpIfDSTECt2BwPercent The value of vRtrRsvpIfDSTECt2BwPercent specifies the percentage link
bandwidth for CT 2. | column | TmnxRsvpDSTEBwPercent | .1.3.6.1.4.1.6527.3.1.2.7.3.1.27 |
| vRtrRsvpIfDSTECt3BwPercent The value of vRtrRsvpIfDSTECt3BwPercent specifies the percentage link
bandwidth for CT 3. | column | TmnxRsvpDSTEBwPercent | .1.3.6.1.4.1.6527.3.1.2.7.3.1.28 |
| vRtrRsvpIfDSTECt4BwPercent The value of vRtrRsvpIfDSTECt4BwPercent specifies the percentage link
bandwidth for CT 4. | column | TmnxRsvpDSTEBwPercent | .1.3.6.1.4.1.6527.3.1.2.7.3.1.29 |
| vRtrRsvpIfAggregate Aggregate messages are used to pack multiple RSVP messages into
a single packet to reduce the network overhead. When
vRtrRsvpIfAggregate is set to 'true', RSVP negotiates with ea… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.7.3.1.3 |
| vRtrRsvpIfDSTECt5BwPercent The value of vRtrRsvpIfDSTECt5BwPercent specifies the percentage link
bandwidth for CT 5. | column | TmnxRsvpDSTEBwPercent | .1.3.6.1.4.1.6527.3.1.2.7.3.1.30 |
| vRtrRsvpIfDSTECt6BwPercent The value of vRtrRsvpIfDSTECt6BwPercent specifies the percentage link
bandwidth for CT 6. | column | TmnxRsvpDSTEBwPercent | .1.3.6.1.4.1.6527.3.1.2.7.3.1.31 |
| vRtrRsvpIfDSTECt7BwPercent The value of vRtrRsvpIfDSTECt7BwPercent specifies the percentage link
bandwidth for CT 7. | column | TmnxRsvpDSTEBwPercent | .1.3.6.1.4.1.6527.3.1.2.7.3.1.32 |
| vRtrRsvpIfInheritance A bit within vRtrRsvpIfInheritance specifies whether to inherit the
operational values of the corresponding inherited objects from
vRtrRsvpGeneralTable or use the administratively… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.7.3.1.33 |
| vRtrRsvpIfDSTEBC0Bw The value of vRtrRsvpIfDSTEBC0Bw indicates Bandwidth Constraint (BC)
for Class Type 0 (CT0). | column | kilobps SNMPv2-SMICounter64 | .1.3.6.1.4.1.6527.3.1.2.7.3.1.34 |
| vRtrRsvpIfDSTEBC1Bw The value of vRtrRsvpIfDSTEBC1Bw indicates the bandwidth constraint
for CT 1. | column | kilobps SNMPv2-SMICounter64 | .1.3.6.1.4.1.6527.3.1.2.7.3.1.35 |
| vRtrRsvpIfDSTEBC2Bw The value of vRtrRsvpIfDSTEBC2Bw indicates the bandwidth constraint
for CT 2. | column | kilobps SNMPv2-SMICounter64 | .1.3.6.1.4.1.6527.3.1.2.7.3.1.36 |
| vRtrRsvpIfDSTEBC3Bw The value of vRtrRsvpIfDSTEBC3Bw indicates the bandwidth constraint
for CT 3. | column | kilobps SNMPv2-SMICounter64 | .1.3.6.1.4.1.6527.3.1.2.7.3.1.37 |
| vRtrRsvpIfDSTEBC4Bw The value of vRtrRsvpIfDSTEBC4Bw indicates the bandwidth constraint
for CT 4. | column | kilobps SNMPv2-SMICounter64 | .1.3.6.1.4.1.6527.3.1.2.7.3.1.38 |
| vRtrRsvpIfDSTEBC5Bw The value of vRtrRsvpIfDSTEBC5Bw indicates the bandwidth constraint
for CT 5. | column | kilobps SNMPv2-SMICounter64 | .1.3.6.1.4.1.6527.3.1.2.7.3.1.39 |
| vRtrRsvpIfAuthenticationKey The value of vRtrRsvpIfAuthenticationKey specifies the
authentication key to be used on this RSVP interface. It is used
along with vRtrRsvpIfAuthentication which specifies whethe… | column | OctetString | .1.3.6.1.4.1.6527.3.1.2.7.3.1.4 |
| vRtrRsvpIfDSTEBC6Bw The value of vRtrRsvpIfDSTEBC6Bw indicates the bandwidth constraint
for CT 6. | column | kilobps SNMPv2-SMICounter64 | .1.3.6.1.4.1.6527.3.1.2.7.3.1.40 |
| vRtrRsvpIfDSTEBC7Bw The value of vRtrRsvpIfDSTEBC7Bw indicates the bandwidth constraint
for CT 7. | column | kilobps SNMPv2-SMICounter64 | .1.3.6.1.4.1.6527.3.1.2.7.3.1.41 |
| vRtrRsvpIfImplicitNull The value of vRtrRsvpIfImplicitNull specifies whether or not to
signal implicit null values for all label switched paths associated
with this RSVP interface when this node is an e… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.7.3.1.42 |
| vRtrRsvpIfIgpUpdatePending The value of vRtrRsvpIfIgpUpdatePending indicates if the TE update
which is to be sent to IGP on any bandwidth change is pending for the
interface.
When the value o… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.7.3.1.43 |
| vRtrRsvpIfIgpNextUpdate The value of vRtrRsvpIfIgpNextUpdate indicates the time remaining in
seconds before the next TE update would be sent to IGP for the
interface.
The value of vRtrRsvp… | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.7.3.1.44 |
| vRtrRsvpIfGraceHelper The value of vRtrRsvpIfGraceHelper specifies whether graceful restart
helper mode is enabled or disabled. When the graceful restart helper
mode when enabled, the system will adver… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.7.3.1.45 |
| vRtrRsvpIfMaxResvBandwidth obsolete The value of vRtrRsvpIfMaxResvBandwidth indicates the amount
of bandwidth in megabits per second (Mbps) available to be
reserved for the RSVP protocol on this interface. This is
… | column | megabps SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.7.3.1.46 |
| vRtrRsvpIfAuthKeyChain The value of vRtrRsvpIfAuthKeyChain specifies the keychain which will
be used to sign and/or authenticate the RSVP protocol stream.
The keychain name is defined by … | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.7.3.1.47 |
| vRtrRsvpIfReservedBandwidth64 The value of vRtrRsvpIfReservedBandwidth64 indicates the amount of
bandwidth in megabits per second (Mbps) to reserved by the
RSVP sessions on this interface. A value of zero (0)… | column | megabps HCNUM-TCCounterBasedGauge64 | .1.3.6.1.4.1.6527.3.1.2.7.3.1.48 |
| vRtrRsvpIfMaxReservedBandwidth64 The value of vRtrRsvpIfMaxReservedBandwidth64 indicates the amount
of bandwidth in megabits per second (Mbps) available to be
reserved for the RSVP protocol on this interface. Th… | column | megabps HCNUM-TCCounterBasedGauge64 | .1.3.6.1.4.1.6527.3.1.2.7.3.1.49 |
| vRtrRsvpIfHelloInterval The value of vRtrRsvpIfHelloInterval specifies the length of time,
in seconds, between the Hello packets that the router sends on
the interface. This value must be the same for al… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.7.3.1.5 |
| vRtrRsvpIfSubscription The value of vRtrRsvpIfSubscription specifies the percentage of the
link bandwidth that RSVP can use for reservation. When the value
of vRtrRsvpIfSubscription is set to zero (0),… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.7.3.1.6 |
| vRtrRsvpIfKeepMultiplier obsolete The value of vRtrRsvpIfKeepMultiplier is used by RSVP to declare
either a reservation down or the neighbor as down.
When vRtrRsvpIfKeepMultiplier is set to the valu… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.7.3.1.7 |
| vRtrRsvpIfOperState vRtrRsvpIfOperState indicates the current operating state of the RSVP
protocol on this interface. When the TIMETRA-VRTR-MIB::vRtrIfPortID
object of this interface is set to a loop… | column | TIMETRA-TC-MIBTmnxOperState | .1.3.6.1.4.1.6527.3.1.2.7.3.1.9 |