vRtrRsvpGeneralLastChange
TIMETRA-RSVP-MIB ·
.1.3.6.1.4.1.6527.3.1.2.7.1.1.1
Object
column
SNMPv2-TCTimeStamp
The sysUpTime when this row was last modified.
Context
- MIB
- TIMETRA-RSVP-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.7.1.1.1- Type
- column
- Access
- readonly
- Status
- current
- Parent
- vRtrRsvpGeneralEntry
- Table
- vRtrRsvpGeneralTable
- Siblings
- 22
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vRtrRsvpGenRapidRetransmitTime The value of vRtrRsvpGenRapidRetransmitTime specifies the value
of the rapid retransmission interval. This is used in the
retransmission mechanism based on an exponential backoff… | column | deciseconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.7.1.1.10 |
| vRtrRsvpGenRapidRetryLimit The value of vRtrRsvpGenRapidRetryLimit specifies the rapid retry
limit. This is used in the retransmission mechanism based on an
exponential backoff timer in order to handle una… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.7.1.1.11 |
| vRtrRsvpGenGracefulShutdown The value of vRtrRsvpGenGracefulShutdown specifies whether
graceful shutdown of the RSVP node is enabled. When this object
has a value of 'true', graceful shutdown is enabled. Wh… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.7.1.1.12 |
| vRtrRsvpGenPreemptionTimer The value of vRtrRsvpGenPreemptionTimer specifies the time a
node holds on to a reservation for which it has triggered the
soft preemption procedure. The preempting node starts a… | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.7.1.1.13 |
| vRtrRsvpGenTEThresholdUpdate The value of vRtrRsvpGenTEThresholdUpdate specifies if threshold based
IGP Traffic Engineering (TE) is enabled or disabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.7.1.1.14 |
| vRtrRsvpGenTEUpdateOnCacFail The value of vRtrRsvpGenTEUpdateOnCacFail specifies if IGP TE update
on Connection Admission Control (CAC) failure during LSP setup is
enabled or disabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.7.1.1.15 |
| vRtrRsvpGenTEUpdateTimer The value of vRtrRsvpGenTEUpdateTimer specifies the time interval to
wait before a forced update of bandwidth to sync the bandwidth can be
triggered. The update only happens when … | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.7.1.1.16 |
| vRtrRsvpGenImplicitNull The value of vRtrRsvpGenImplicitNull specifies whether or not to
signal implicit null values for all label switched paths associated
with this RSVP when this node is an egress Lab… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.7.1.1.17 |
| vRtrRsvpGenNodeIdInRro The value of vRtrRsvpGenNodeIdInRro specifies whether or not the
nodeId is included in Record Route Object (RRO). | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.7.1.1.18 |
| vRtrRsvpGenP2PMrgPntAbrtTimer The value of vRtrRsvpGenP2PMrgPntAbrtTimer specifies the time in
seconds, MPLS will wait to clean up all the point-to-point (P2P) LSP
paths which have the Incoming Label Mapping (… | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.7.1.1.19 |
| vRtrRsvpGeneralAdminState When vRtrRsvpGeneralAdminState is set to 'inService', the agent
attempts to enable the RSVP protocol instance on this router.
When vRtrRsvpGeneralAdminState is set … | column | TIMETRA-TC-MIBTmnxAdminState | .1.3.6.1.4.1.6527.3.1.2.7.1.1.2 |
| vRtrRsvpGenP2MPMrgPntAbrtTimer The value of vRtrRsvpGenP2MPMrgPntAbrtTimer specifies the time in
seconds, MPLS will wait to clean up all the point-to-multi-point
(P2MP) source to leaf (S2L) LSP paths which have… | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.7.1.1.20 |
| vRtrRsvpGeneralGrHlprMaxRcvryTm The value of vRtrRsvpGeneralGrHlprMaxRcvryTm specifies the maximum
time in seconds, a graceful helper will wait for session recovery.
This value is compared with the neighbor's ad… | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.7.1.1.21 |
| vRtrRsvpGeneralGrHlprMaxRstrtTm The value of vRtrRsvpGeneralGrHlprMaxRstrtTm specifies the maximum
time in seconds a graceful helper will waits for session restart after
it has determined that the neighbor is do… | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.7.1.1.22 |
| vRtrRsvpGenEntropyLblCapability The value of vRtrRsvpGenEntropyLblCapability specifies whether entropy
label capability is enabled or not on the RSVP node. When the value of
vRtrRsvpGenEntropyLblCapability is se… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.7.1.1.23 |
| vRtrRsvpGeneralOperState vRtrRsvpGeneralOperState indicates the current operating state of this
RSVP protocol instance on this router. | column | TIMETRA-TC-MIBTmnxOperState | .1.3.6.1.4.1.6527.3.1.2.7.1.1.3 |
| vRtrRsvpGeneralKeepMultiplier The value of vRtrRsvpGeneralKeepMultiplier is used by RSVP to declare
either a reservation down or the neighbor as down.
When vRtrRsvpIfKeepMultiplier is set to the… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.7.1.1.4 |
| vRtrRsvpGeneralRefreshTime The value of vRtrRsvpGeneralRefreshTime controls the interval between
the successive Path and Resv refresh messages. RSVP declares the
session down after it misses ((keep-multipli… | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.7.1.1.5 |
| vRtrRsvpGeneralMsgPacing Setting the value of vRtrRsvpGeneralMsgPacing to 'true', enables RSVP
message pacing wherein a specified number of RSVP messages are sent
within a specified interval.
… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.7.1.1.6 |
| vRtrRsvpGeneralMsgPacingMaxBurst When RSVP message pacing is enabled (i.e. when
vRtrRsvpGeneralMsgPacing is set to 'true'), the value of
vRtrRsvpGeneralMsgPacingMaxBurst specifies the maximum number of RSVP
messa… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.7.1.1.7 |
| vRtrRsvpGeneralMsgPacingPeriod When RSVP message pacing is enabled (i.e. when
vRtrRsvpGeneralMsgPacing is set to 'true'), the value of
vRtrRsvpGeneralMsgPacingPeriod specifies the interval (in
milliseconds) dur… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.7.1.1.8 |
| vRtrRsvpGeneralRefreshBypass The value of vRtrRsvpGeneralRefreshBypass specifies whether the
refresh reduction capabilities over all bypass tunnels originating
on the PLR node is enabled. Since a bypass tunn… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.7.1.1.9 |