vRtrRipIfInheritance
TIMETRA-RIP-MIB ·
.1.3.6.1.4.1.6527.3.1.2.9.4.1.26
Object
vRtrRipIfInheritance controls, for the objects listed below, whether
to use the administratively set value for that object or objects or to
use the corresponding value or values from the vRtrRipGroupTable entry
that represents the RIP group to which this interface belongs.
This object is a bit-mask, and the bits correspond to the following
objects:
vRtrRipIfAuthType 0x00000001
vRtrRipIfAuthKey 0x00000002
vRtrRipIfSend 0x00000004
vRtrRipIfReceive 0x00000008
vRtrRipIfCheckZero 0x00000010
vRtrRipIfMessageSize 0x00000020
vRtrRipIfMetricIn 0x00000040
vRtrRipIfMetricOut 0x00000080
vRtrRipIfPreference 0x00000100
vRtrRipIfSplitHorizon 0x00000200
vRtrRipIfTimerFlush 0x00000400
vRtrRipIfTimerTimeout
vRtrRipIfTimerUpdate
vRtrRipIfImportPolicy1 0x00000800
vRtrRipIfImportPolicy2
vRtrRipIfImportPolicy3
vRtrRipIfImportPolicy4
vRtrRipIfImportPolicy5
vRtrRipIfExportPolicy1 0x00001000
vRtrRipIfExportPolicy2
vRtrRipIfExportPolicy3
vRtrRipIfExportPolicy4
vRtrRipIfExportPolicy5
vRtrRipIfBfdEnable 0x00002000
When the bit for an object is set to one, then the object's
value is whatever the DEFVAL or most recently SET value is.
The corresponding mask bit will be changed to one when SNMP
SET is performed on any of the inherited objects ( vRtrRipIfSend,
vRtrRipIfAuthType, etc ).
When the bit for an object is set to zero, then the object's value is
inherited from the corresponding object in vRtrRipGroupTable whose
index is the value of vRtrRipIfGroupName.
Non mask bits will always have value of zero, and any attempt to
change the value will be silently discarded.
The bit, 'timer(10)', applies this rule to all of the following
objects:
vRtrRipIfTimerFlush
vRtrRipIfTimerTimeout
vRtrRipIfTimerUpdate
The bit, 'importPolicy(11)', applies this rule to all of the
following objects:
vRtrRipIfImportPolicy1,
vRtrRipIfImportPolicy2,
vRtrRipIfImportPolicy3,
vRtrRipIfImportPolicy4,
vRtrRipIfImportPolicy5
The bit, 'exportPolicy(12)', applies this rule to all of the
following objects:
vRtrRipIfExportPolicy1,
vRtrRipIfExportPolicy2,
vRtrRipIfExportPolicy3,
vRtrRipIfExportPolicy4,
vRtrRipIfExportPolicy5
Context
- MIB
- TIMETRA-RIP-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.9.4.1.26- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- vRtrRipIfEntry
- Table
- vRtrRipIfTable
- Siblings
- 29
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vRtrRipIfGroupName vRtrRipIfGroupName is an index into the vRtrRipGroupTable. It
identifies the RIP group to which this interface belongs. This object
must be set to an existing group name before th… | column | TIMETRA-TC-MIBTNamedItem | .1.3.6.1.4.1.6527.3.1.2.9.4.1.1 |
| vRtrRipIfSend vRtrRipIfSend specifies the version to be used for sending RIP updates
on the interface. | column | TmnxRipSend | .1.3.6.1.4.1.6527.3.1.2.9.4.1.10 |
| vRtrRipIfSplitHorizon vRtrRipIfSplitHorizon specifies whether split horizon scheme is is to
be used when sending updates on the interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.9.4.1.11 |
| vRtrRipIfTimerFlush vRtrRipIfTimerFlush specifies the number of seconds after a
route has been declared invalid that it is flushed from the
route database. | column | seconds TmnxRipTimerFlush | .1.3.6.1.4.1.6527.3.1.2.9.4.1.12 |
| vRtrRipIfTimerTimeout vRtrRipIfTimerTimeout specifies the number of seconds after a route
has been discovered or last updated that it is declared invalid in the
route database. | column | seconds TmnxRipTimerTimeout | .1.3.6.1.4.1.6527.3.1.2.9.4.1.13 |
| vRtrRipIfTimerUpdate vRtrRipIfTimerUpdate specifies how often updates are sent. | column | seconds TmnxRipTimerUpdate | .1.3.6.1.4.1.6527.3.1.2.9.4.1.14 |
| vRtrRipIfImportPolicy1 vRtrRipIfImportPolicy1 is import policy number 1 for the interface. | column | TIMETRA-TC-MIBTPolicyStatementNameOrEmpty | .1.3.6.1.4.1.6527.3.1.2.9.4.1.15 |
| vRtrRipIfImportPolicy2 vRtrRipIfImportPolicy2 is import policy number 2 for the interface. | column | TIMETRA-TC-MIBTPolicyStatementNameOrEmpty | .1.3.6.1.4.1.6527.3.1.2.9.4.1.16 |
| vRtrRipIfImportPolicy3 vRtrRipIfImportPolicy3 is import policy number 3 for the interface. | column | TIMETRA-TC-MIBTPolicyStatementNameOrEmpty | .1.3.6.1.4.1.6527.3.1.2.9.4.1.17 |
| vRtrRipIfImportPolicy4 vRtrRipIfImportPolicy4 is import policy number 4 for the interface. | column | TIMETRA-TC-MIBTPolicyStatementNameOrEmpty | .1.3.6.1.4.1.6527.3.1.2.9.4.1.18 |
| vRtrRipIfImportPolicy5 vRtrRipIfImportPolicy5 is import policy number 5 for the interface. | column | TIMETRA-TC-MIBTPolicyStatementNameOrEmpty | .1.3.6.1.4.1.6527.3.1.2.9.4.1.19 |
| vRtrRipIfAuthType vRtrRipIfAuthType defines the type of authentication to be used for
this interface. | column | TmnxRipAuthType | .1.3.6.1.4.1.6527.3.1.2.9.4.1.2 |
| vRtrRipIfExportPolicy1 vRtrRipIfExportPolicy1 is export policy number 1 for the interface. | column | TIMETRA-TC-MIBTPolicyStatementNameOrEmpty | .1.3.6.1.4.1.6527.3.1.2.9.4.1.20 |
| vRtrRipIfExportPolicy2 vRtrRipIfExportPolicy2 is export policy number 2 for the interface. | column | TIMETRA-TC-MIBTPolicyStatementNameOrEmpty | .1.3.6.1.4.1.6527.3.1.2.9.4.1.21 |
| vRtrRipIfExportPolicy3 vRtrRipIfExportPolicy3 is export policy number 3 for the interface. | column | TIMETRA-TC-MIBTPolicyStatementNameOrEmpty | .1.3.6.1.4.1.6527.3.1.2.9.4.1.22 |
| vRtrRipIfExportPolicy4 vRtrRipIfExportPolicy4 is export policy number 4 for the interface. | column | TIMETRA-TC-MIBTPolicyStatementNameOrEmpty | .1.3.6.1.4.1.6527.3.1.2.9.4.1.23 |
| vRtrRipIfExportPolicy5 vRtrRipIfExportPolicy5 is export policy number 5 for the interface. | column | TIMETRA-TC-MIBTPolicyStatementNameOrEmpty | .1.3.6.1.4.1.6527.3.1.2.9.4.1.24 |
| vRtrRipIfDescription vRtrRipIfDescription specifies a textual description for the
interface. | column | TIMETRA-TC-MIBTItemDescription | .1.3.6.1.4.1.6527.3.1.2.9.4.1.25 |
| vRtrRipIfAdminStatus The value of vRtrRipIfAdminStatus specifies the desired administrative
state for this RIP interface. | column | TIMETRA-TC-MIBTmnxAdminState | .1.3.6.1.4.1.6527.3.1.2.9.4.1.27 |
| vRtrRipIfOperStatus The value of vRtrRipIfOperStatus indicates the current operational
status of this RIP interface. | column | TIMETRA-TC-MIBTmnxOperState | .1.3.6.1.4.1.6527.3.1.2.9.4.1.28 |
| vRtrRipIfRowStatus vRtrRipIfRowStatus controls the creation and deletion of rows in this
table.
To create a row in the vRtrRipIfTable, set vRtrRipIfRowStatus to
createAndGo(4). vRtrRi… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6527.3.1.2.9.4.1.29 |
| vRtrRipIfAuthKey vRtrRipIfAuthKey is the authentication key that should be used for
this interface when vRtrRipInstanceAuthType has a value other than
noAuthentication(1). Modifying the value of v… | column | TmnxRipAuthKey | .1.3.6.1.4.1.6527.3.1.2.9.4.1.3 |
| vRtrRipIfBfdEnable The value of vRtrRipIfBfdEnable specifies whether RIP peers will be
monitored with BFD. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.9.4.1.30 |
| vRtrRipIfCheckZero vRtrRipIfCheckZero specifies whether RIP updates received on this
interface are checked for zero values in fields defined as
Must-Be-Zero by the RIPv1 and v2 specifications. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.9.4.1.4 |
| vRtrRipIfMessageSize vRtrRipIfMessageSize is the maximum number of routes that can be sent
out per RIP update message. | column | TmnxRipMessageSize | .1.3.6.1.4.1.6527.3.1.2.9.4.1.5 |
| vRtrRipIfMetricIn vRtrRipIfMetricIn is the value added to the metric of routes received
on this RIP interface. | column | TmnxRipMetric | .1.3.6.1.4.1.6527.3.1.2.9.4.1.6 |
| vRtrRipIfMetricOut vRtrRipIfMetricOut is the value added to the metric of routes exported
into RIP and advertised out on this RIP interface. | column | TmnxRipMetric | .1.3.6.1.4.1.6527.3.1.2.9.4.1.7 |
| vRtrRipIfPreference vRtrRipIfPreference is the route preference to be assigned to routes
received on this interface. This value may be overridden via route
policies. | column | TmnxRipPreference | .1.3.6.1.4.1.6527.3.1.2.9.4.1.8 |
| vRtrRipIfReceive vRtrRipIfReceive specifies which version of RIP updates are to be
accepted on the interface. | column | TmnxRipReceive | .1.3.6.1.4.1.6527.3.1.2.9.4.1.9 |