tmnxOspfNgIfRtrPriority
TIMETRA-OSPF-NG-MIB ·
.1.3.6.1.4.1.6527.3.1.2.36.31.1.8
Object
The value of tmnxOspfNgIfRtrPriority specifies the priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligible to become the designated router on this particular network. In the event of a tie in this value, routers will use their Router ID as a tie breaker.
Context
- MIB
- TIMETRA-OSPF-NG-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.36.31.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- tmnxOspfNgIfEntry
- Table
- tmnxOspfNgIfTable
- Siblings
- 35
Values & Constraints
Type Constraints
range: 0..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tmnxOspfNgIfIndex The value of tmnxOspfNgIfIndex specifies the interface index of
this OSPF interface. It corresponds to the interface index of the
IP interface on which OSPF is configured. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.6527.3.1.2.36.31.1.1 |
| tmnxOspfNgIfRetransInterval The value of tmnxOspfNgIfRetransInterval specifies the number of
seconds between link state advertisement retransmissions, for
adjacencies belonging to this interface. This value … | column | seconds Integer32 | .1.3.6.1.4.1.6527.3.1.2.36.31.1.10 |
| tmnxOspfNgIfHelloInterval The value of tmnxOspfNgIfHelloInterval specifies the length of time,
in seconds, between the Hello packets that the router sends on the
interface. This value MUST be the same for… | column | seconds OSPF-MIBHelloRange | .1.3.6.1.4.1.6527.3.1.2.36.31.1.11 |
| tmnxOspfNgIfRtrDeadInterval The value of tmnxOspfNgIfRtrDeadInterval specifies the number of
seconds that a router's Hello packets have not been seen before
its neighbors declare the router down on the inter… | column | seconds TmnxOspfDeadIntRangeTc | .1.3.6.1.4.1.6527.3.1.2.36.31.1.12 |
| tmnxOspfNgIfPollInterval The value of tmnxOspfNgIfPollInterval specifies the larger time
interval, in seconds, between the Hello packets sent to an inactive
non-broadcast multi-access neighbor. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.36.31.1.13 |
| tmnxOspfNgIfCfgMTU The value of tmnxOspfNgIfCfgMTU specifies the desired size of the
largest packet which can be sent/received on this OSPF interface,
specified in octets. This size DOES include the… | column | Integer32 | .1.3.6.1.4.1.6527.3.1.2.36.31.1.14 |
| tmnxOspfNgIfCfgMetric The value of tmnxOspfNgIfCfgMetric specifies the desired
metric value assigned to this interface. The default value
'0' causes the value of the Metric to be calculated as
(Refere… | column | OSPF-MIBMetric | .1.3.6.1.4.1.6527.3.1.2.36.31.1.15 |
| tmnxOspfNgIfPassive The value of tmnxOspfNgIfPassive specifies whether or or not HELLOs
are to be sent out on this interface and whether or not the router
advertises it as STUB network/link in its ro… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.36.31.1.16 |
| tmnxOspfNgIfAdvtSubnet The value of tmnxOspfNgIfAdvtSubnet specifies the advertisement
method. When tmnxOspfNgIfAdvtSubnet is set to 'true', OSPF will
advertise the network number and netmask instead o… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.36.31.1.17 |
| tmnxOspfNgIfAuthType The value of tmnxOspfNgIfAuthType specifies the authentication type to
use for an interface.
Note that this object can be used to engage in significant attacks
agai… | column | TmnxOspfAuthenticationType | .1.3.6.1.4.1.6527.3.1.2.36.31.1.18 |
| tmnxOspfNgIfAuthKey The value of tmnxOspfNgIfAuthKey specifies the authentication key
string. The cleartext password is used as an OSPF Authentication
key when simplePassword security is enabled. Th… | column | OctetString | .1.3.6.1.4.1.6527.3.1.2.36.31.1.19 |
| tmnxOspfNgIfInstId The value of tmnxOspfNgIfInstId specifies the OSPF instance. It
enables multiple interface instances of OSPF to be run over a
single link. Each protocol instance would be assigne… | column | TmnxOspfIfInstIdTc | .1.3.6.1.4.1.6527.3.1.2.36.31.1.2 |
| tmnxOspfNgIfEnableBfd The value of tmnxOspfNgIfEnableBfd specifies whether Bi-directional
Forwarding Detection is enabled for Ipv4 in this OSPF interface.
When the value is 'true', this … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.36.31.1.20 |
| tmnxOspfNgIfRemainDownOnFail The value of tmnxOspfNgIfRemainDownOnFail specifies whether an OSPF
adjacency should go down when the BFD session to the peer goes down. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.36.31.1.21 |
| tmnxOspfNgIfInboundSAName The value of tmnxOspfNgIfInboundSAName specifies the manually
configured IPsec Security Association name in case the Ospfv3 traffic
on the [interface] has to be authenticated.
… | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.36.31.1.22 |
| tmnxOspfNgIfOutboundSAName The value of tmnxOspfNgIfOutboundSAName specifies the manually
configured IPsec Security Association name in case the Ospfv3 traffic
on the [interface] has to be authenticated.
… | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.36.31.1.23 |
| tmnxOspfNgIfLoopfreeAltExclude The value of tmnxOspfNgIfLoopfreeAltExclude specifies whether or not
the OSPF interface should be excluded during LFA calculations. If the
value is 'true', the OSPF interface is e… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.36.31.1.24 |
| tmnxOspfNgIfLsaFilterOut The value of tmnxOspfNgIfLsaFilterOut specifies whether or not flooded
LSAs should be sent to any adjacent neighbor on the OSPF interface.
If the value is 'none', t… | column | TmnxOspfLsaFilterOutTc | .1.3.6.1.4.1.6527.3.1.2.36.31.1.25 |
| tmnxOspfNgIfAdvRtrCapability The value of tmnxOspfNgIfAdvRtrCapability specifies whether or not
advertise-router-capabilities are enabled at interface level. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.36.31.1.26 |
| tmnxOspfNgIfAuthKeyChain The value of tmnxOspfNgIfAuthKeyChain specifies the keychain which
will be used to sign and/or authenticate the OSPF protocol stream.
The keychain name is defined b… | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.36.31.1.27 |
| tmnxOspfNgIfRouteNHTemplate The value of tmnxOspfNgIfRouteNHTemplate specifies the next-hop
template that must be applied to the prefixes which primary next-hop
uses this interface name.
The n… | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.36.31.1.28 |
| tmnxOspfNgIfPriorityUpdate The value of tmnxOspfNgIfPriorityUpdate specifies whether or not
routes via this interface should get priority when downloading to FIB.
If the value is 'high', then these routes a… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.36.31.1.29 |
| tmnxOspfNgIfAreaId The value of tmnxOspfNgIfAreaId specifies a 32-bit integer uniquely
identifying the area to which the interface connects. Area ID 0 is
used for the OSPF backbone. | column | TmnxOspfAreaIdTc | .1.3.6.1.4.1.6527.3.1.2.36.31.1.3 |
| tmnxOspfNgIfSidType The value of the object tmnxOspfNgIfSidType specifies whether the
object tmnxOspfNgIfSidValue is not valid, an index value or an
absolute label value. | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.36.31.1.30 |
| tmnxOspfNgIfSidValue The value of the object tmnxOspfNgIfSidValue together with
tmnxOspfNgIfSidType specifies the SID value or index for this
interface. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.36.31.1.31 |
| tmnxOspfNgIfSidProtection The value of the object tmnxOspfNgIfSidProtection specifies whether
the SID needs to be advertised with protection enabled or disabled.
If the value of tmnxOspfNgIf… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.36.31.1.32 |
| tmnxOspfNgIfSidClearNFlag The value of tmnxOspfNgIfSidClearNFlag specifies whether the node-sid
flag (N-flag) should be cleared in a prefix SID sub-TLV.
When the value of tmnxOspfNgIfSidClea… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.36.31.1.33 |
| tmnxOspfNgIfAdjSidType The value of the object tmnxOspfNgIfAdjSidType specifies whether the
object tmnxOspfNgIfAdjSidValue is not valid, an index value or an
absolute label value. | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.36.31.1.34 |
| tmnxOspfNgIfAdjSidValue The value of the object tmnxOspfNgIfAdjSidValue together with
tmnxOspfNgIfAdjSidType specifies the static adjacency SID value or
index to be used for this adjacency. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.36.31.1.35 |
| tmnxOspfNgIfLBAdminWeight The value of the object tmnxOspfNgIfLBAdminWeight specifies an
explicit load-balancing-weight for this interface. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.36.31.1.37 |
| tmnxOspfNgIfStatus The value of tmnxOspfNgIfStatus controls creation and deletion of a
row entry in this table. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6527.3.1.2.36.31.1.4 |
| tmnxOspfNgIfLastChanged The value of tmnxOspfNgIfLastChanged indicates the sysUpTime when a
configurable object in this row was last modified. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.3.1.2.36.31.1.5 |
| tmnxOspfNgIfCfgType The value of tmnxOspfNgIfCfgType specifies the OSPF interface type.
The value of 'unspecified' sets the interface type to its default
value based on the underlying … | column | TmnxOspfIfTypeTc | .1.3.6.1.4.1.6527.3.1.2.36.31.1.6 |
| tmnxOspfNgIfAdminState The value of tmnxOspfNgIfAdminState specifies the OSPF interface's
administrative status. The value formed on the interface, and the
interface will be advertised as an internal r… | column | OSPF-MIBStatus | .1.3.6.1.4.1.6527.3.1.2.36.31.1.7 |
| tmnxOspfNgIfTransitDelay The value of tmnxOspfNgIfTransitDelay specifies the estimated number
of seconds it takes to transmit a link state update packet over this
interface. | column | seconds Integer32 | .1.3.6.1.4.1.6527.3.1.2.36.31.1.9 |