tmnxOamVccvTrCtlTable
TIMETRA-OAM-TEST-MIB ·
.1.3.6.1.4.1.6527.3.1.2.11.2.26
Object
table
Each row in tmnxOamVccvTrCtlTable contains the VCCV-specific
configuration information needed to launch a VCCV (Virtual Circuit
Connectivity Verification) trace route test. The rest of the
configuration information needed to launch the test resides in the
corresponding row of tmnxOamTrCtlTable.
Four types of VCCV trace route tests are supported: AII Type 2,
FEC-128 Pseudowire, Spoke SDP FEC, and Transport Profile Static. AII
Type 2 and Spoke SDP FEC offer two ways to specify a VCCV trace route
FEC-129 Pseudowire test.
In the Transport Profile Static case, the test type is configured
(using tmnxOamVccvTrCtlTestSubMode). In the other three cases, the
test type is not configured (i.e. the default
tmnxOamVccvTrCtlTestSubMode value 'unspecified(1)' is used).
The following table has a row for each VCCV trace route test type,
showing the mandatory and optional objects applicable to the test
type. Abbreviated VCCV trace route test type names are used.
Test
Type Mandatory Objects Optional Objects
------ ------------------------------ ---------------------------------
aiiTY2 tmnxOamVccvTrCtlSaiiAcId tmnxOamVccvTrCtlReplyMode
tmnxOamVccvTrCtlSaiiGlobalId
tmnxOamVccvTrCtlSaiiPrefix
tmnxOamVccvTrCtlTaiiAcId
tmnxOamVccvTrCtlTaiiGlobalId
tmnxOamVccvTrCtlTaiiPrefix
FEC128 tmnxOamVccvTrCtlSdpIdVcId tmnxOamVccvTrCtlReplyMode
*tmnxOamVccvTrCtlSwitTgtFecType
*tmnxOamVccvTrTgStaticCtlAgi
*tmnxOamVccvTrTgStaticCtlSaiiGlbl
*tmnxOamVccvTrTgStaticCtlSaiiNode
*tmnxOamVccvTrTgStaticCtlSaiiAcId
*tmnxOamVccvTrTgStaticCtlTaiiGlbl
*tmnxOamVccvTrTgStaticCtlTaiiNode
*tmnxOamVccvTrTgStaticCtlTaiiAcId
sdpFEC tmnxOamVccvTrCtlSpokeSdpId *tmnxOamVccvTrCtlSaiiAcId
*tmnxOamVccvTrCtlSaiiGlobalId
*tmnxOamVccvTrCtlSaiiPrefix
*tmnxOamVccvTrCtlTaiiAcId
*tmnxOamVccvTrCtlTaiiGlobalId
*tmnxOamVccvTrCtlTaiiPrefix
tmnxOamVccvTrCtlReplyMode
TPST tmnxOamVccvTrCtlSdpIdVcId *tmnxOamTrCtlSrcAddrType
tmnxOamVccvTrCtlTestSubMode *tmnxOamTrCtlSrcAddress
tmnxOamVccvTrCtlAssocChannel
#tmnxOamVccvTrCtlSwitTgtFecType
#tmnxOamVccvTrTgFec128CtlSrcAddrT
#tmnxOamVccvTrTgFec128CtlSrcAddr
#tmnxOamVccvTrTgFec128CtlDstAddrT
#tmnxOamVccvTrTgFec128CtlDstAddr
#tmnxOamVccvTrTgFec128CtlPwId
#tmnxOamVccvTrTgFec128CtlPwType
ALL N/A tmnxOamTrCtlDataSize
tmnxOamTrCtlFcName
tmnxOamTrCtlInitialTtl
tmnxOamTrCtlInterval
tmnxOamTrCtlMaxFailures
tmnxOamTrCtlMaxTtl
tmnxOamTrCtlProbesPerHop
tmnxOamTrCtlProfile
tmnxOamTrCtlTimeOut
------ ------------------------------ ---------------------------------
In the table above,
1. The optional objects in the ALL row apply to all four VCCV trace
route test types.
2. The characters '*' and '#' each mark an independent set of optional
objects which must all be specified, or must all be unspecified.
When an object combination other than a combination listed above is
specified, values will be rejected or ignored, or the test will fail.
Context
- MIB
- TIMETRA-OAM-TEST-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.11.2.26- Type
- table
- Status
- current
- Parent
- tmnxOamTraceRouteObjs
- Siblings
- 37
- Children
- 1
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tmnxOamTraceRouteNotifyObjects | node | - | .1.3.6.1.4.1.6527.3.1.2.11.2.1 |
| tmnxOamLspTrMapTable tmnxOamLspTrMapTable contains the information obtained from RFC 4379
Downstream Mapping TLVs and/or RFC 6424 Downstream Detailed Mapping
TLVs within reply PDUs for active 'lspTrac… | table | - | .1.3.6.1.4.1.6527.3.1.2.11.2.10 |
| tmnxOamVprnTrCtlTable tmnxOamVprnTrCtlTable contains configuration information for
'vprnTraceRoute' tests. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.2.11 |
| tmnxOamVprnTrL3MapTable Defines a table for storing the results of an OAM 'vprnTraceRoute'
probe operation.
An entry in this table is created when the result of an OAM
'vprnTraceRoute' probe i… | table | - | .1.3.6.1.4.1.6527.3.1.2.11.2.12 |
| tmnxOamVprnTrNextHopTable Defines a table for storing the results of an OAM 'vprnTraceRoute'
probe operation where a L3 route next hop list is returned.
An entry in this table is created when th… | table | - | .1.3.6.1.4.1.6527.3.1.2.11.2.13 |
| tmnxOamVprnTrRTTable Defines a table for storing the results of an OAM 'vprnTraceRoute'
probe operation where a L3 route target list is returned.
An entry in this table is created when the … | table | - | .1.3.6.1.4.1.6527.3.1.2.11.2.14 |
| tmnxOamLspTrDSLabelTable Defines a table for storing the results of an OAM 'lspTraceRoute' probe
operation when a Downstream Mapping TLV was returned. Each row
represents a single downstream label within… | table | - | .1.3.6.1.4.1.6527.3.1.2.11.2.15 |
| tmnxOamMcastTrCtlTable tmnxOamMcastTrCtlTable contains configuration and status information
specific to 'mcastTraceRoute' tests. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.2.16 |
| tmnxOamMcastTrRespTable tmnxOamMcastTrRespTable contains multicast-specific information
learned from probe responses for 'mcastTraceRoute' tests.
tmnxOamTrProbeHistoryTable contains the remain… | table | - | .1.3.6.1.4.1.6527.3.1.2.11.2.17 |
| tmnxOamLTtraceCtlTable Each row in tmnxOamLTtraceCtlTable contains the LDP-tree-trace-specific
configuration information needed to launch a foreground LDP (Label
Distribution Protocol) tree trace test. … | table | - | .1.3.6.1.4.1.6527.3.1.2.11.2.18 |
| tmnxOamLTtraceMaxConRequests The value of tmnxOamLTtraceMaxConRequests indicates the maximum number
of concurrent LDP Tree Trace manual discovery sessions that are
allowed within an agent implementation. | scalar | requests SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.11.2.19 |
| tmnxOamTrMaxConcurrentRequests The maximum number of concurrent active trace route requests
that are allowed within an agent implementation. A value
of 0 for this object implies that there is no limit for
the … | scalar | requests SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.11.2.2 |
| tmnxOamLTtraceResultsTable tmnxOamLTtraceResultsTable contains the run-level test results for
'ldpTreeTrace' tests. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.2.20 |
| tmnxOamLTtraceHopInfoTable tmnxOamLTtraceHopInfoTable contains the TTL-level test results for
'ldpTreeTrace' tests. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.2.21 |
| tmnxOamLTtraceAutoConfigTable tmnxOamLTtraceAutoConfigTable contains configuration information for
background LDP Tree Trace for the Base virtual router.
Results are available in
tmnxOamLTtraceA… | table | - | .1.3.6.1.4.1.6527.3.1.2.11.2.22 |
| tmnxOamLTtraceAutoStatusTable tmnxOamLTtraceAutoStatusTable contains status information for
background LDP Tree Trace for the Base virtual router.
Background LDP tree trace is configured using
tmnxO… | table | - | .1.3.6.1.4.1.6527.3.1.2.11.2.23 |
| tmnxOamLTtraceFecInfoTable tmnxOamLTtraceFecInfoTable contains per-FEC (i.e. per-prefix)
information discovered by background LDP tree trace.
Background LDP tree trace is configured using
tmnxOam… | table | - | .1.3.6.1.4.1.6527.3.1.2.11.2.24 |
| tmnxOamLTtracePathInfoTable tmnxOamLTtracePathInfoTable contains per-path information discovered
by background LDP tree trace.
Background LDP tree trace is configured using
tmnxOamLTtraceAutoConfi… | table | - | .1.3.6.1.4.1.6527.3.1.2.11.2.25 |
| tmnxOamVccvTrNextPwSegmentTable Defines a table for storing the results of an OAM 'vccvTraceRoute'
probe operation where a VCCV next hop list is returned.
An entry in this table is created when the re… | table | - | .1.3.6.1.4.1.6527.3.1.2.11.2.27 |
| tmnxOamP2mpLspTrCtlTable tmnxOamP2mpLspTrCtlTable contains configuration information for
'p2mpLspTrace' tests. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.2.28 |
| tmnxOamP2mpLspTrMapTable Defines a table for storing the results of an OAM 'p2mpLspTrace'
probe operation when a Downstream Mapping TLV was returned. Each row
represents a single label map within the ret… | table | - | .1.3.6.1.4.1.6527.3.1.2.11.2.29 |
| tmnxOamTrCtlTable tmnxOamTrCtlTable contains configuration and status information for
trace tests. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.2.3 |
| tmnxOamP2mpLspTrDSLabelTable Defines a table for storing the results of an OAM 'p2mpLspTrace'
probe operation when a Downstream Mapping TLV was
returned. Each row represents a single downstream label within … | table | - | .1.3.6.1.4.1.6527.3.1.2.11.2.30 |
| tmnxOamEthCfmTrCtlTable tmnxOamEthCfmTrCtlTable contains Ethernet CFM-specific configuration
information for 'ethCfmLinkTrace' tests.
This table extends the tmnxOamTrCtlTable. A row is automa… | table | - | .1.3.6.1.4.1.6527.3.1.2.11.2.31 |
| tmnxOamEthCfmTrPrHistTable tmnxOamEthCfmTrPrHistTable contains Ethernet CFM-specific probe
history for 'ethCfmLinkTrace' tests.
This table extends the tmnxOamTrProbeHistoryTable. A row is
automa… | table | - | .1.3.6.1.4.1.6527.3.1.2.11.2.32 |
| tmnxOamLspTrFecStackTable tmnxOamLspTrFecStackTable has a row for each RFC 6424 FEC (Forwarding
Equivalence Class) Stack Change sub-TLV present in a currently managed
'lspTraceRoute' reply PDU.
… | table | - | .1.3.6.1.4.1.6527.3.1.2.11.2.33 |
| tmnxOamVccvTrTgFec128CtlTable tmnxOamVccvTrTgFec128CtlTable contains the target information for VCCV
(Virtual Circuit Connectivity Verification) trace route tests which
switch to downstream FEC (Forward Equiva… | table | - | .1.3.6.1.4.1.6527.3.1.2.11.2.34 |
| tmnxOamVccvTrTgStaticCtlTable tmnxOamVccvTrTgStaticCtlTable contains the target information for VCCV
(Virtual Circuit Connectivity Verification) trace route tests which
switch to downstream static (i.e. MPLS-T… | table | - | .1.3.6.1.4.1.6527.3.1.2.11.2.35 |
| tmnxOamIcmpTrLabelStackTable tmnxOamIcmpTrLabelStackTable contains the information read from RFC
4950 MPLS Label Stack Objects in ICMPv4 or ICMPv6 replies, received in
response to locally initiated 'icmpTrace… | table | - | .1.3.6.1.4.1.6527.3.1.2.11.2.36 |
| tmnxOamBierTrCtlTable tmnxOamBierTrCtlTable (along with tmnxOamTrCtlTable) contains the
configuration information for BIER (Bit Index Explicit Replication)
trace route tests. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.2.37 |
| tmnxOamBierTrProbeHistoryTable tmnxOamBierTrProbeHistoryTable (along with tmnxOamTrProbeHistoryTable)
contains the per-probe results for Bit Index Explicit Replication
(BIER) trace tests. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.2.38 |
| tmnxOamTrResultsTable tmnxOamTrResultsTable contains the run-level test results for OAM
trace tests.
TTL-level test results for trace tests reside in tmnxOamTrHopsTable.
Probe-lev… | table | - | .1.3.6.1.4.1.6527.3.1.2.11.2.4 |
| tmnxOamTrProbeHistoryTable tmnxOamTrProbeHistoryTable contains per-probe results for most trace route
tests. Exceptions are noted in the tmnxOamTrCtlTestMode DESCRIPTION
clause. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.2.5 |
| tmnxOamTrHopsTable tmnxOamTrHopsTable contains the TTL-level test results for OAM trace
tests.
Run-level test results for trace tests reside in
tmnxOamTrResultsTable.
Probe-lev… | table | - | .1.3.6.1.4.1.6527.3.1.2.11.2.6 |
| tmnxOamMacTrCtlTable tmnxOamMacTrCtlTable contains configuration information for
'macTraceRoute' tests. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.2.7 |
| tmnxOamMacTrL2MapTable Defines a table for storing the results of an OAM 'macTraceRoute'
probe operation when a L2 Mapping TLV was returned. Each row
represents a single L2FEC TLV within the L2 Mapping… | table | - | .1.3.6.1.4.1.6527.3.1.2.11.2.8 |
| tmnxOamLspTrCtlTable Each row in tmnxOamLspTrCtlTable contains the LSP-specific
configuration information needed to launch an LSP (Label Switched Path)
trace route test. The rest of the configuration… | table | - | .1.3.6.1.4.1.6527.3.1.2.11.2.9 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tmnxOamVccvTrCtlEntry The system creates a row in tmnxOamVccvTrCtlTable when
tmnxOamTrCtlTestMode is set to 'vccvTraceRoute'.
The system destroys a row in tmnxOamVccvTrCtlTable when the
co… | row | - | .1.3.6.1.4.1.6527.3.1.2.11.2.26.1 |