tmnxOamSaaCtlKeepProbeHistoryOpr

TIMETRA-OAM-TEST-MIB · .1.3.6.1.4.1.6527.3.1.2.11.3.2.1.16

Object

column Enumeration

The value of tmnxOamSaaCtlKeepProbeHistoryOpr indicates whether or not
per-probe history table rows will be created for this test.  A test
without per-probe history table rows consumes less CPM RAM.
              
The value of tmnxOamSaaCtlKeepProbeHistoryOpr is derived from the
value of tmnxOamSaaCtlKeepProbeHistoryAdm, as shown in the following
table.
              
tmnxOamSaaCtlKeepProbeHistoryAdm tmnxOamSaaCtlKeepProbeHistoryOpr
-------------------------------- --------------------------------------
'keep(1)'                        'keep(1)'
'drop(2)'                        'drop(2)'
'auto(3)'                        'keep(1)' or 'drop(2)', chosen by SROS
              
The history table rows created for the combinations of
tmnxOamSaaCtlKeepProbeHistoryOpr and tmnxOamSaaCtlTestMode values are
shown in the following table.
              
Configuration Options           History Table Rows Created
--------------------------      --------------------------
'keep(1)', 'ping(1)'            tmnxOamPingHistoryTable or
                                tmnxOamMacPingHistoryTable
'keep(1)', 'traceroute(2)'      tmnxOamTrProbeHistoryTable
'drop(2)', 'ping(1)'            none
'drop(2)', 'traceroute(2)'      unsupported combination.
              
If tmnxOamSaaCtlTestMode is 'notConfigured(0)', the value of
tmnxOamSaaCtlKeepProbeHistoryOpr is insignificant, since a test without
a test mode cannot be started.  When a Get is performed on
tmnxOamSaaCtlKeepProbeHistoryOpr in this case, 'keep(1)' is returned.
              
If tmnxOamSaaCtlKeepProbeHistoryAdm is 'auto(3)':
  1.  tmnxOamSaaCtlKeepProbeHistoryOpr is 'drop(2)' if
      a) the test's probe count is greater than 100, OR
      b) the test's interval is less than one second, OR
      c) tmnxOamSaaCtlTestMode is 'ping(1)' AND the test is continuous
         (i.e. tmnxOamSaaCtlContinuous is 'true') AND an accounting
         policy is specified (i.e. tmnxOamSaaCtlAcctPolicyId is non-
         zero).
  2.  Otherwise, tmnxOamSaaCtlKeepProbeHistoryOpr is 'keep(1)'.

Context

MIB: TIMETRA-OAM-TEST-MIB
OID: .1.3.6.1.4.1.6527.3.1.2.11.3.2.1.16
Type: column
Access: readonly
Status: current
Parent: tmnxOamSaaCtlEntry
Table: tmnxOamSaaCtlTable
Siblings: 15

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	keep
`2`	drop

Related Objects

Sibling Objects

Object	Type	Syntax	OID
tmnxOamSaaCtlOwnerIndex The value of tmnxOamSaaCtlOwnerIndex specifies the name of the owner of the test.	column	OctetString	`.1.3.6.1.4.1.6527.3.1.2.11.3.2.1.1`
tmnxOamSaaCtlFailures The value of tmnxOamSaaCtlFailures indicates the number of times this SAA test has failed.	column	SNMPv2-SMICounter32	`.1.3.6.1.4.1.6527.3.1.2.11.3.2.1.10`
tmnxOamSaaCtlLastRunResult The value of tmnxOamSaaCtlLastRunResult indicates the completion status the last time this test was executed. If this SAA test is currently in progress, this object indicates the…	column	TmnxOamTestResult	`.1.3.6.1.4.1.6527.3.1.2.11.3.2.1.11`
tmnxOamSaaCtlAcctPolicyId The value of tmnxOamSaaCtlAcctPolicyId specifies the accounting policy used to record the information obtained from the results tables. A value of zero specifies no accounting po…	column	Integer32	`.1.3.6.1.4.1.6527.3.1.2.11.3.2.1.12`
tmnxOamSaaCtlSuppressAccounting The value of tmnxOamSaaCtlSuppressAccounting specifies whether or not the accounting file update is suppressed. The value 'true(1)' is applicable only when an accounting policy ha…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.6527.3.1.2.11.3.2.1.13`
tmnxOamSaaCtlContinuous The value of tmnxOamSaaCtlContinuous specifies whether or not the SAA test is to be executed indefinitely. Setting tmnxOamSaaCtlContinuous to 'true(1)' is accepted …	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.6527.3.1.2.11.3.2.1.14`
tmnxOamSaaCtlKeepProbeHistoryAdm The value of tmnxOamSaaCtlKeepProbeHistoryAdm specifies whether or not per-probe history table rows will be created for this test. A test without per-probe history table rows con…	column	Enumeration	`.1.3.6.1.4.1.6527.3.1.2.11.3.2.1.15`
tmnxOamSaaCtlTestIndex The value of tmnxOamSaaCtlTestIndex specifies the test name of the test. The test is identified by the owner name and the test name. One owner typically owns sever…	column	OctetString	`.1.3.6.1.4.1.6527.3.1.2.11.3.2.1.2`
tmnxOamSaaCtlRowStatus The value of tmnxOamSaaCtlRowStatus specifies the row status of the SAA test. When creating an SAA test 1. The tmnxOamSaaCtlTable row must be created first. 2. Th…	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.6527.3.1.2.11.3.2.1.3`
tmnxOamSaaCtlStorageType obsolete This object was marked obsolete in SROS Release 14.0 R1. There is no replacement object.	column	SNMPv2-TCStorageType	`.1.3.6.1.4.1.6527.3.1.2.11.3.2.1.4`
tmnxOamSaaCtlLastChanged The value of tmnxOamSaaCtlLastChanged indicates the time the value of a settable object in this row was last changed.	column	SNMPv2-TCTimeStamp	`.1.3.6.1.4.1.6527.3.1.2.11.3.2.1.5`
tmnxOamSaaCtlAdminStatus The value of tmnxOamSaaCtlAdminStatus specifies the administrative state of the SAA test. tmnxOamSaaCtlAdminStatus = 'inService(2)' is a prerequisite for starting a…	column	TIMETRA-TC-MIBTmnxAdminState	`.1.3.6.1.4.1.6527.3.1.2.11.3.2.1.6`
tmnxOamSaaCtlDescr The value of tmnxOamSaaCtlDescr specifies the description of the SAA test.	column	TIMETRA-TC-MIBTItemDescription	`.1.3.6.1.4.1.6527.3.1.2.11.3.2.1.7`
tmnxOamSaaCtlTestMode The value of tmnxOamSaaCtlTestMode indicates the type of SAA test to be performed. When the value of this object is 'notConfigured(0)', no associated row exists in …	column	TmnxOamTestMode	`.1.3.6.1.4.1.6527.3.1.2.11.3.2.1.8`
tmnxOamSaaCtlRuns The value of tmnxOamSaaCtlRuns indicates the number of times this SAA test has started.	column	SNMPv2-SMICounter32	`.1.3.6.1.4.1.6527.3.1.2.11.3.2.1.9`