tmnxOamPmCfgMeasIntvlsStored
TIMETRA-OAM-PM-MIB ·
.1.3.6.1.4.1.6527.3.1.2.92.1.3.7.1.4
Object
column
r/w
Unsigned32
The value of tmnxOamPmCfgMeasIntvlsStored specifies the maximum number
of historical measurement intervals which can be read using SNMP Get
operations.
For example, suppose tmnxOamPmCfgMeasIntvlsStored is 32 in the row
indexed by {'mySess1', 'mi15Minutes(2)'}. Suppose 'mySess1' has a DMM
test which has been running for at least 8 hours (i.e. 15
minutes/interval * 32 intervals). Then, the number of SNMP accessible
15 minute intervals for the test is shown in the following table.
Test State Number of SNMP Accessible 15 Minute Intervals
---------- -----------------------------------------------------------
running 33 (i.e. 32 historical intervals, and the current interval)
stopped 32 (i.e. 32 historical intervals)
At the moment when a test is stopped, the current interval becomes the
newest historical interval. If that makes the total number of
historical intervals larger than tmnxOamPmCfgMeasIntvlsStored, the
oldest historical interval is made SNMP inaccessible.
In a typical configuration, older statistics are recorded in a local
file (see tmnxOamPmCfgMeasIntvlAccntPolicy). Statistics in the file
are not SNMP accessible.
The range and default of tmnxOamPmCfgMeasIntvlsStored varies with the
row's measurement interval duration index value, as follows.
tmnxOamPmCfgMeasIntvlDuration Intvls Stored Range Intvls Stored Default
----------------------------- ------------------- ---------------------
'mi5Minutes(5)' 1..96 32
'mi15Minutes(2)' 1..96 32
'mi1Hour(3)' 1..24 8
'mi1Day(4)' 1..1 1
The following limit is enforced per session (where 'S' is the session
name):
tmnxOamPmCfgMeasIntvlsStored.S.mi5Minutes(5) +
tmnxOamPmCfgMeasIntvlsStored.S.mi15Minutes(2) <= 96.
Context
- MIB
- TIMETRA-OAM-PM-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.92.1.3.7.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- tmnxOamPmCfgMeasIntvlEntry
- Table
- tmnxOamPmCfgMeasIntvlTable
- Siblings
- 8
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 1-96
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tmnxOamPmCfgMeasIntvlDuration The value of tmnxOamPmCfgMeasIntvlDuration specifies the duration of
the measurement interval (e.g. 'mi15Minutes(2)') to be read or
configured. | column | TmnxOamPmCfgMeasIntervalDuration | .1.3.6.1.4.1.6527.3.1.2.92.1.3.7.1.1 |
| tmnxOamPmCfgMeasIntvlRowStatus The value of tmnxOamPmCfgMeasIntvlRowStatus specifies the status of
the configuration row for the specified session and measurement
interval duration. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6527.3.1.2.92.1.3.7.1.2 |
| tmnxOamPmCfgMeasIntvlAccntPolicy The value of tmnxOamPmCfgMeasIntvlAccntPolicy specifies the accounting
policy for the specified session and measurement interval duration.
Zero specifies that the s… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.92.1.3.7.1.3 |
| tmnxOamPmCfgMeasIntvlBoundaryTyp The value of tmnxOamPmCfgMeasIntvlBoundaryTyp specifies whether or not
the start of each measurement interval is aligned to the wall clock.
Values:
clockAligned(… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.92.1.3.7.1.5 |
| tmnxOamPmCfgMeasIntvlClockOffset The value of tmnxOamPmCfgMeasIntvlClockOffset specifies the offset (in
seconds) for the start of a measurement interval.
For example, the following set of values wi… | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.92.1.3.7.1.6 |
| tmnxOamPmCfgMeasIntvlDelayTCAs The value of tmnxOamPmCfgMeasIntvlDelayTCAs specifies the
administrative state of delay Threshold Crossing Alerts (TCAs) for
this measurement interval.
Delay TCAs a… | column | TIMETRA-TC-MIBTmnxEnabledDisabled | .1.3.6.1.4.1.6527.3.1.2.92.1.3.7.1.7 |
| tmnxOamPmCfgMeasIntvlLossTCAs The value of tmnxOamPmCfgMeasIntvlLossTCAs specifies the
administrative state of loss Threshold Crossing Alerts (TCAs) for this
measurement interval.
Loss TCAs are … | column | TIMETRA-TC-MIBTmnxEnabledDisabled | .1.3.6.1.4.1.6527.3.1.2.92.1.3.7.1.8 |
| tmnxOamPmCfgMeasIntvlTCAs The value of tmnxOamPmCfgMeasIntvlTCAs specifies the administrative
state of Threshold Crossing Alerts (TCAs) for this measurement
interval.
Delay TCAs are administ… | column | TIMETRA-TC-MIBTmnxEnabledDisabled | .1.3.6.1.4.1.6527.3.1.2.92.1.3.7.1.9 |