tmnxMsdpNgRpfLookupSequence
TIMETRA-MSDP-NG-MIB ·
.1.3.6.1.4.1.6527.3.1.2.104.2.1.24
Object
column
r/w
Enumeration
tmnxMsdpNgRpfLookupSequence is used to configure the sequence of route
tables that MSDP uses for finding a Reverse Path Forwarding(RPF)
interface for a particular multicast route.
'mucastRouteTable' is the unicast route table to be used only by
multicast protocols(MSDP) which will contain routes submitted by
multi-protocol BGP, ISIS and OSPF.
'ucastRouteTable' is the regular unicast route table which will
contain routes submitted by all the unicast routing protocols. By
default, only the 'ucastRouteTable' is looked up by MSDP for
calculating RPF interface towards the source/rendezvous point. However
the operator can specify the following: a) Use unicast route table
only b) Use multicast unicast route table only or c) Use both the
route tables.
In case of (c), MSDP will always lookup first in the
'mucastRouteTable' and if there is a route, it will use it. If MSDP
does not find a route in the first lookup, it will try to find it in
the 'ucastRouteTable'.
Context
- MIB
- TIMETRA-MSDP-NG-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.104.2.1.24- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- tmnxMsdpNgGeneralEntry
- Table
- tmnxMsdpNgGeneralTable
- Siblings
- 26
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | mucastRouteTable |
1 | ucastRouteTable |
2 | both |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tmnxMsdpNgMaxActiveSources The value of tmnxMsdpNgMaxActiveSources specifies the maximum number
of source active messages that will be accepted by MSDP. This
effectively controls the number of source active… | column | Integer32 | .1.3.6.1.4.1.6527.3.1.2.104.2.1.1 |
| tmnxMsdpNgExportPolicy4 The value of tmnxMsdpNgExportPolicy4 specifies the fourth export
policy to export Source Active (SA) state from the SA list into MSDP.
By default no export policies… | column | TIMETRA-TC-MIBTPolicyStatementNameOrEmpty | .1.3.6.1.4.1.6527.3.1.2.104.2.1.10 |
| tmnxMsdpNgExportPolicy5 The value of tmnxMsdpNgExportPolicy5 specifies the fifth export policy
to export Source Active (SA) state from the SA list into MSDP.
By default no export policies … | column | TIMETRA-TC-MIBTPolicyStatementNameOrEmpty | .1.3.6.1.4.1.6527.3.1.2.104.2.1.11 |
| tmnxMsdpNgImportPolicy1 The value of tmnxMsdpNgImportPolicy1 specifies the first import policy
to import Source Active (SA) state from the SA list into MSDP.
By default no import policies … | column | TIMETRA-TC-MIBTPolicyStatementNameOrEmpty | .1.3.6.1.4.1.6527.3.1.2.104.2.1.12 |
| tmnxMsdpNgImportPolicy2 The value of tmnxMsdpNgImportPolicy2 specifies the second import
policy to import Source Active (SA) state from the SA list into MSDP.
By default no import policies… | column | TIMETRA-TC-MIBTPolicyStatementNameOrEmpty | .1.3.6.1.4.1.6527.3.1.2.104.2.1.13 |
| tmnxMsdpNgImportPolicy3 The value of tmnxMsdpNgImportPolicy3 specifies the third import policy
to import Source Active (SA) state from the SA list into MSDP.
By default no import policies … | column | TIMETRA-TC-MIBTPolicyStatementNameOrEmpty | .1.3.6.1.4.1.6527.3.1.2.104.2.1.14 |
| tmnxMsdpNgImportPolicy4 The value of tmnxMsdpNgImportPolicy4 specifies the fourth import
policy to import Source Active (SA) state from the SA list into MSDP.
By default no import policies… | column | TIMETRA-TC-MIBTPolicyStatementNameOrEmpty | .1.3.6.1.4.1.6527.3.1.2.104.2.1.15 |
| tmnxMsdpNgImportPolicy5 The value of tmnxMsdpNgImportPolicy5 specifies the fifth import policy
to import Source Active (SA) state from the SA list into MSDP.
By default no import policies … | column | TIMETRA-TC-MIBTPolicyStatementNameOrEmpty | .1.3.6.1.4.1.6527.3.1.2.104.2.1.16 |
| tmnxMsdpNgLocalAddressType The value of tmnxMsdpNgLocalAddressType specifies the type of
tmnxMsdpNgLocalAddress. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.6527.3.1.2.104.2.1.17 |
| tmnxMsdpNgLocalAddress The value of tmnxMsdpNgLocalAddress is used to configure the local
end of a MSDP session. In order for MSDP to function at least one
peer must be configured. When configuring a p… | column | OctetString | .1.3.6.1.4.1.6527.3.1.2.104.2.1.18 |
| tmnxMsdpNgStatusPeerCount The value of tmnxMsdpNgStatusPeerCount indicates the number of
configured peers. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.6527.3.1.2.104.2.1.19 |
| tmnxMsdpNgMsgRcvRate The value of tmnxMsdpNgMsgRcvRate specifies the number of MSDP
messages (including source active messages) that are read from the
TCP session per tmnxMsdpNgMsgRcvRateTime second… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.104.2.1.2 |
| tmnxMsdpNgStatusPeersEstablished The value of tmnxMsdpNgStatusPeersEstablished indicates the number of
peers in established state. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.6527.3.1.2.104.2.1.20 |
| tmnxMsdpNgStatusSACount The value of tmnxMsdpNgStatusSACount indicates the number of source
active configured in cache. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.6527.3.1.2.104.2.1.21 |
| tmnxMsdpNgStatusLastTimeUp The value of tmnxMsdpNgStatusLastTimeUp indicates the last time the
protocol was enabled. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.3.1.2.104.2.1.22 |
| tmnxMsdpNgStatusActSrcLimExceed The value of tmnxMsdpNgStatusActSrcLimExceed indicates the number of
times the global active source limit has been exceeded. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6527.3.1.2.104.2.1.23 |
| tmnxMsdpNgSACacheLifetime The value of tmnxMsdpNgSACacheLifetime specifies lifetime given to SA
cache entries in seconds when created or refreshed.
This object does not measure time per se; … | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.104.2.1.25 |
| tmnxMsdpNgSARejectExportPolicy The value of tmnxMsdpNgSARejectExportPolicy indicates number of SA
messages that were not sent due to export policy. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6527.3.1.2.104.2.1.26 |
| tmnxMsdpNgSARejectImportPolicy The value of tmnxMsdpNgSARejectImportPolicy indicates number of SA
messages that were rejected due to import policy. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6527.3.1.2.104.2.1.27 |
| tmnxMsdpNgMsgRcvRateTime The value of tmnxMsdpNgMsgRcvRateTime specifies the time in seconds
that together with tmnxMsdpNgMsgRcvRate defines the number of MSDP
messages (including source active messages)… | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.104.2.1.3 |
| tmnxMsdpNgMsgRcvRateThd The value of tmnxMsdpNgMsgRcvRateThd specifies the number of MSDP
messages that can be processed before tmnxMsdpNgMsgRcvRate is set.
This is useful during system startup and initi… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.104.2.1.4 |
| tmnxMsdpNgDataEncapsulation The value of tmnxMsdpNgDataEncapsulation is used to configure a
rendezvous point (RP) using MSDP to encapsulate multicast data
received in MSDP register messages inside forwarded … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.104.2.1.5 |
| tmnxMsdpNgAdminState The value of tmnxMsdpNgAdminState specifies the desired administrative
state for MSDP. When MSDP is 'outOfService' the operational state of
MSDP as well as the operational state o… | column | TIMETRA-TC-MIBTmnxAdminState | .1.3.6.1.4.1.6527.3.1.2.104.2.1.6 |
| tmnxMsdpNgExportPolicy1 The value of tmnxMsdpNgExportPolicy1 specifies the first export policy
to export Source Active (SA) state from the SA list into MSDP.
By default no export policies … | column | TIMETRA-TC-MIBTPolicyStatementNameOrEmpty | .1.3.6.1.4.1.6527.3.1.2.104.2.1.7 |
| tmnxMsdpNgExportPolicy2 The value of tmnxMsdpNgExportPolicy2 specifies the second export
policy to export Source Active (SA) state from the SA list into MSDP.
By default no export policies… | column | TIMETRA-TC-MIBTPolicyStatementNameOrEmpty | .1.3.6.1.4.1.6527.3.1.2.104.2.1.8 |
| tmnxMsdpNgExportPolicy3 The value of tmnxMsdpNgExportPolicy3 specifies the third export policy
to export Source Active (SA) state from the SA list into MSDP.
By default no export policies … | column | TIMETRA-TC-MIBTPolicyStatementNameOrEmpty | .1.3.6.1.4.1.6527.3.1.2.104.2.1.9 |