tmnxMsdpRpfLookupSequence
TIMETRA-MSDP-MIB ·
.1.3.6.1.4.1.6527.3.1.2.43.1.24
Object
scalar
r/w
Enumeration
tmnxMsdpRpfLookupSequence is used to configure the sequence of
route tables that MSDP uses for finding a Reverse Path Forwarding(RPF)
interface for a particular multicast route.
'mucastRouteTable' is the unicast route table to be used only by
multicast protocols(MSDP) which will contain routes submitted by
multi-protocol BGP, ISIS and OSPF.
'ucastRouteTable' is the regular unicast route table which will contain
routes submitted by all the unicast routing protocols. By default,
only the 'ucastRouteTable' is looked up by MSDP for calculating RPF
interface towards the source/rendezvous point. However the operator can
specify the following:
a) Use unicast route table only
b) Use multicast unicast route table only or
c) Use both the route tables.
In case of (c), MSDP will always lookup first in the 'mucastRouteTable'
and if there is a route, it will use it. If MSDP does not find a
route in the first lookup, it will try to find it in the
'ucastRouteTable'.
Context
- MIB
- TIMETRA-MSDP-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.43.1.24- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- tmnxMsdpGlobals
- Siblings
- 26
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | mucastRouteTable |
1 | ucastRouteTable |
2 | both |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tmnxMsdpMaxActiveSources The value of tmnxMsdpMaxActiveSources specifies the maximum
number of source active messages that will be accepted by MSDP. This
effectively controls the number of source active … | scalar | Integer32 | .1.3.6.1.4.1.6527.3.1.2.43.1.1 |
| tmnxMsdpExportPolicy4 The value of tmnxMsdpExportPolicy4 specifies the export policy to
export Source Active (SA) state from the SA list into MSDP.
tmnxMsdpExportPolicy4 specifies policy number 4 at… | scalar | TIMETRA-TC-MIBTPolicyStatementNameOrEmpty | .1.3.6.1.4.1.6527.3.1.2.43.1.10 |
| tmnxMsdpExportPolicy5 The value of tmnxMsdpExportPolicy5 specifies the export policy to
export Source Active (SA) state from the SA list into MSDP.
tmnxMsdpExportPolicy1 specifies policy number 5 at… | scalar | TIMETRA-TC-MIBTPolicyStatementNameOrEmpty | .1.3.6.1.4.1.6527.3.1.2.43.1.11 |
| tmnxMsdpImportPolicy1 The value of tmnxMsdpImportPolicy1 specifies the import policy to
import Source Active (SA) state from the SA list into MSDP. A
maximum of five policy names can be specified. … | scalar | TIMETRA-TC-MIBTPolicyStatementNameOrEmpty | .1.3.6.1.4.1.6527.3.1.2.43.1.12 |
| tmnxMsdpImportPolicy2 The value of tmnxMsdpImportPolicy2 specifies the import policy to
import Source Active (SA) state from the SA list into MSDP.
tmnxMsdpImportPolicy2 specifies policy number 2 at… | scalar | TIMETRA-TC-MIBTPolicyStatementNameOrEmpty | .1.3.6.1.4.1.6527.3.1.2.43.1.13 |
| tmnxMsdpImportPolicy3 The value of tmnxMsdpImportPolicy3 specifies the import policy to
import Source Active (SA) state from the SA list into MSDP.
tmnxMsdpImportPolicy3 specifies policy number 3 at… | scalar | TIMETRA-TC-MIBTPolicyStatementNameOrEmpty | .1.3.6.1.4.1.6527.3.1.2.43.1.14 |
| tmnxMsdpImportPolicy4 The value of tmnxMsdpImportPolicy4 specifies the import policy to
import Source Active (SA) state from the SA list into MSDP.
tmnxMsdpImportPolicy4 specifies policy number 4 a… | scalar | TIMETRA-TC-MIBTPolicyStatementNameOrEmpty | .1.3.6.1.4.1.6527.3.1.2.43.1.15 |
| tmnxMsdpImportPolicy5 The value of tmnxMsdpImportPolicy5 specifies the import policy to
import Source Active (SA) state from the SA list into MSDP.
tmnxMsdpImportPolicy5 specifies policy number 5 a… | scalar | TIMETRA-TC-MIBTPolicyStatementNameOrEmpty | .1.3.6.1.4.1.6527.3.1.2.43.1.16 |
| tmnxMsdpLocalAddressType The value of tmnxMsdpLocalAddressType indicates the type of
tmnxMsdpLocalAddress. | scalar | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.6527.3.1.2.43.1.17 |
| tmnxMsdpLocalAddress The value of tmnxMsdpLocalAddress is used to configure the local
end of a MSDP session. In order for MSDP to function at least one
peer must be configured. When configuring a p… | scalar | OctetString | .1.3.6.1.4.1.6527.3.1.2.43.1.18 |
| tmnxMsdpStatusPeerCount The value of tmnxMsdpStatusPeerCount indicates the number
of configured peers. | scalar | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.6527.3.1.2.43.1.19 |
| tmnxMsdpMsgRcvRate The value of tmnxMsdpMsgRcvRate specifies the number of MSDP
messages (including source active messages) that are read from the
TCP session per tmnxMsdpMsgRcvRateTime seconds.
… | scalar | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.43.1.2 |
| tmnxMsdpStatusPeersEstablished The value of tmnxMsdpStatusPeersEstablished indicates the number
of peers in established state | scalar | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.6527.3.1.2.43.1.20 |
| tmnxMsdpStatusSACount The value of tmnxMsdpStatusSACount indicates the number of source
active configured in cache. | scalar | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.6527.3.1.2.43.1.21 |
| tmnxMsdpStatusLastTimeUp The value of tmnxMsdpStatusLastTimeUp indicates the last time the
protocol was enabled. | scalar | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.3.1.2.43.1.22 |
| tmnxMsdpStatusActSrcLimExceeded The value of tmnxMsdpStatusActSrcLimExceeded indicates the number
of times the global active source limit has been exceeded | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6527.3.1.2.43.1.23 |
| tmnxMsdpSACacheLifetime The value of tmnxMsdpSACacheLifetime specifies lifetime given to
SA cache entries in seconds when created or refreshed.
This object does not measure time per se; inst… | scalar | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.43.1.25 |
| tmnxMsdpSARejectExportPolicy The value of tmnxMsdpSARejectExportPolicy indicates number of
SA messages that were not sent due to export policy. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6527.3.1.2.43.1.26 |
| tmnxMsdpSARejectImportPolicy The value of tmnxMsdpSARejectImportPolicy indicates number of
SA messages that were rejected due to import policy. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6527.3.1.2.43.1.27 |
| tmnxMsdpMsgRcvRateTime The value of tmnxMsdpMsgRcvRateTime specifies the time in seconds
that together with tmnxMsdpMsgRcvRate defines the number of MSDP
messages (including source active messages) t… | scalar | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.43.1.3 |
| tmnxMsdpMsgRcvRateThd The value of tmnxMsdpMsgRcvRateThd specifies the number of
MSDP messages that can be processed before tmnxMsdpMsgRcvRate is
set. This is useful during system startup and initial… | scalar | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.43.1.4 |
| tmnxMsdpDataEncapsulation The value of tmnxMsdpDataEncapsulation is used to configure a
rendezvous point (RP) using MSDP to encapsulate multicast data
received in MSDP register messages inside forwarded … | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.43.1.5 |
| tmnxMsdpAdminState The value of tmnxMsdpAdminState specifies the desired administrative
state for MSDP. When MSDP is 'outOfService' the operational state of
MSDP as well as the operational state of … | scalar | TIMETRA-TC-MIBTmnxAdminState | .1.3.6.1.4.1.6527.3.1.2.43.1.6 |
| tmnxMsdpExportPolicy1 The value of tmnxMsdpExportPolicy1 specifies the export policy to
export Source Active (SA) state from the SA list into MSDP.
A maximum of five policy names can be specified.
… | scalar | TIMETRA-TC-MIBTPolicyStatementNameOrEmpty | .1.3.6.1.4.1.6527.3.1.2.43.1.7 |
| tmnxMsdpExportPolicy2 The value of tmnxMsdpExportPolicy2 specifies the export policy to
export Source Active (SA) state from the SA list into MSDP.
tmnxMsdpExportPolicy2 specifies policy number 2 at … | scalar | TIMETRA-TC-MIBTPolicyStatementNameOrEmpty | .1.3.6.1.4.1.6527.3.1.2.43.1.8 |
| tmnxMsdpExportPolicy3 The value of tmnxMsdpExportPolicy3 specifies the export policy to
export Source Active (SA) state from the SA list into MSDP.
tmnxMsdpExportPolicy3 specifies policy number 3 at… | scalar | TIMETRA-TC-MIBTPolicyStatementNameOrEmpty | .1.3.6.1.4.1.6527.3.1.2.43.1.9 |