vRtrMplsGeneralBypassResigTimer
TIMETRA-MPLS-MIB ·
.1.3.6.1.4.1.6527.3.1.2.6.7.1.43
Object
column
r/w
minutes Unsigned32
The value of vRtrMplsGeneralBypassResigTimer specifies the value for
the Bypass LSP resignal timer, that is the time, in minutes, the
software will wait before attempting to resignal Bypass LSPs.
When the resignal timer expires, if the new CSPF path for a Bypass LSP
has a better metric than the current CSPF path, an attempt will be
made to resignal that Bypass LSP. If the attempt to resignal the
Bypass LSP fails, the FRR LSPs protected by that Bypass LSP will
continue to use that Bypass LSP and a resignal will be attempted the
next time the timer expires.
A value of 0 for the resignal timer indicates that timer-based Bypass
LSP resignalling has been disabled.
Context
- MIB
- TIMETRA-MPLS-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.6.7.1.43- Type
- column
- Access
- readwrite
- Status
- current
- Units
- minutes
- Parent
- vRtrMplsGeneralEntry
- Table
- vRtrMplsGeneralTable
- Siblings
- 55
Syntax
minutes Unsigned32
Values & Constraints
Object Constraints
range: 0-10080
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vRtrMplsGeneralLastChange The sysUpTime when this row was last modified. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.3.1.2.6.7.1.1 |
| vRtrMplsGeneralHoldTimer The value of vRtrMplsGeneralHoldTimer specifies the time, in seconds,
for which the ingress node holds a bit before programming its data
plane and declaring the lsp up to the serv… | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.7.1.10 |
| vRtrMplsGeneralDynamicBypass The value of vRtrMplsGeneralDynamicBypass specifies whether dynamic
bypass tunnels are enabled.
By default, dynamic bypass tunnels are enabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.6.7.1.11 |
| vRtrMplsGeneralNextResignal The value of vRtrMplsGeneralNextResignal indicates the time remaining,
in minutes, for the vRtrMplsGeneralResignalTimer to expire. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.7.1.12 |
| vRtrMplsGeneralOperDownReason The value of vRtrMplsGeneralOperDownReason indicates the reason due to
which the MPLS instance is operationally down. | column | TmnxMplsOperDownReasonCode | .1.3.6.1.4.1.6527.3.1.2.6.7.1.13 |
| vRtrMplsGeneralSrlgFrr The value of vRtrMplsGeneralSrlgFrr specifies whether Shared Risk
Link Group (SRLG) constraint will be used in the computation of
FRR bypass or detour to be associated with any pr… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.6.7.1.14 |
| vRtrMplsGeneralSrlgFrrStrict The value of vRtrMplsGeneralSrlgFrrStrict specifies whether
to associate the LSP with a bypass or signal a detour if a
bypass or detour satisfies all other constraints except the … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.6.7.1.15 |
| vRtrMplsGeneralNewP2mpInstIndex The value of vRtrMplsGeneralNewP2mpInstIndex specifies the object that is used to assign
values to vRtrMplsP2mpInstIndex as described in 'Textual Conventions for SNMPv2'. The
net… | column | SNMPv2-TCTestAndIncr | .1.3.6.1.4.1.6527.3.1.2.6.7.1.16 |
| vRtrMplsGeneralLeastFillMinThd The value of vRtrMplsGeneralLeastFillMinThd specifies in percentage
the least minimum threshold parameter used in the least-fill path
selection process. When comparing the percent… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.7.1.17 |
| vRtrMplsGenLeastFillReoptiThd The value of vRtrMplsGenLeastFillReoptiThd specifies in percentage the
least reoptimization threshold parameter used in the least-fill path
selection process.
Durin… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.7.1.18 |
| vRtrMplsGeneralUseSrlgDB The value of vRtrMplsGeneralUseSrlgDB specifies whether the use of the
user SRLG database by CSPF is enabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.6.7.1.19 |
| vRtrMplsGeneralAdminState When vRtrMplsGeneralAdminState is set to 'inService', the agent
attempts to enable the MPLS protocol instance on this router.
When vRtrMplsGeneralAdminState is set … | column | TIMETRA-TC-MIBTmnxAdminState | .1.3.6.1.4.1.6527.3.1.2.6.7.1.2 |
| vRtrMplsGeneralP2mpResigTimer The value of vRtrMplsGeneralP2mpResigTimer specifies the value for the
P2MP (point to multi point) LSP resignal timer, that is the time, in
minutes, the software will wait before … | column | minutes Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.7.1.20 |
| vRtrMplsGeneralP2mpNextResignal The value of vRtrMplsGeneralP2mpNextResignal indicates the time
remaining, in minutes, for the vRtrMplsGeneralP2mpResigTimer to
expire. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.7.1.21 |
| vRtrMplsGeneralSecFastRetryTimer The value of vRtrMplsGeneralSecFastRetryTimer specifies the value, in
seconds, used as fast retry timer for a secondary path. If the first
attempt to setup a secondary path fails … | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.7.1.22 |
| vRtrMplsGeneralShortTTLPropLocal The value of vRtrMplsGeneralShortTTLPropLocal specifies whether or not
to enable the propagation of time to live (TTL) from the IP packet
header into the header of the resulting M… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.6.7.1.23 |
| vRtrMplsGeneralShortTTLPropTrans The value of vRtrMplsGeneralShortTTLPropTrans specifies whether or not
to enable the propagation of time to live (TTL) from the IP packet
header into the header of the resulting M… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.6.7.1.24 |
| vRtrMplsGeneralStaticLspFRTimer The value of vRtrMplsGeneralStaticLspFRTimer specifies the audit time
for static LSPs which are not currently up. | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.7.1.25 |
| vRtrMplsGeneralAutoBWDefSampMul The value of vRtrMplsGeneralAutoBWDefSampMul specifies the global
default for collection intervals in a sample interval. | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.7.1.26 |
| vRtrMplsGeneralAutoBWDefAdjMul The value of vRtrMplsGeneralAutoBWDefAdjMul specifies the global
default for collection intervals in an adjust interval. | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.7.1.27 |
| vRtrMplsGeneralExpBackoffRetry The value of vRtrMplsGeneralExpBackoffRetry specifies the state of
Exponential Backoff Retry mechanism. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.6.7.1.28 |
| vRtrMplsGeneralCspfOnLooseHop The value of vRtrMplsGeneralCspfOnLooseHop specifies whether the
Constrained Shortest Path First (CSPF) calculation till the next loose
hop is enabled or not. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.6.7.1.29 |
| vRtrMplsGeneralOperState vRtrMplsGeneralOperState indicates the current operating state of this
MPLS protocol instance on this router. | column | TIMETRA-TC-MIBTmnxOperState | .1.3.6.1.4.1.6527.3.1.2.6.7.1.3 |
| vRtrMplsGeneralP2PMaxByPassAssoc The value of vRtrMplsGeneralP2PMaxByPassAssoc specifies the maximum
number of LSP primary paths that can associate with each manual or
dynamic bypass point-to-point (P2P) LSP. | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.7.1.30 |
| vRtrMplsGenP2pActPathFastRetry The value of vRtrMplsGenP2pActPathFastRetry specifies the time, in
seconds, active path point-to-point (P2P) LSP waits before it attempts
to re-establish itself. This timer is sta… | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.7.1.31 |
| vRtrMplsGenP2mpS2lFastRetry The value of vRtrMplsGenP2mpS2lFastRetry specifies the time, in
seconds, active path point to multipoint (P2MP) source to leaf (S2L)
LSP waits before it attempts to re-establish i… | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.7.1.32 |
| vRtrMplsGenLspInitRetryTimeout The value of vRtrMplsGenLspInitRetryTimeout specifies the amount of
time in seconds the software waits for an LSP path to come up after
sending out the initial Path message. If th… | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.7.1.33 |
| vRtrMplsLoggerEventBundling The value of vRtrMplsLoggerEventBundling specifies whether or not the
notification bundling mechanism is enabled.
When the value of vRtrMplsLoggerEventBundling is s… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.6.7.1.34 |
| vRtrMplsGenIssuMplsLockdown The value of vRtrMplsGenIssuMplsLockdown indicates if MPLS has entered
the state of not accepting new requests for creation of LSPs
(local/transit) during the minor ISSU(In Servic… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.6.7.1.39 |
| vRtrMplsGeneralPropagateTtl obsolete When vRtrMplsGeneralPropagateTtl is set to 'true', for all LSPs,
the ingress ESR writes the TTL of the IP packet in the label and
each transit ESR decrements the TTL in the label.… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.6.7.1.4 |
| vRtrMplsGenFRAdminGroup The value of vRtrMplsGenFRAdminGroup specifies whether or not the use
of administrative group constraints on a FRR backup LSP at a
Point-of-Local Repair(PLR) node is enabled.
… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.6.7.1.40 |
| vRtrMplsGenRetryOnIgpOverload The value of vRtrMplsGenRetryOnIgpOverload specifies whether or not to
teardown LSPs transiting through nodes that are in IGP overload state.
When the value of vRtr… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.6.7.1.41 |
| vRtrMplsGenMbbPrefCurrentHops The value of vRtrMplsGenMbbPrefCurrentHops specifies whether or not
Constrained Shortest Path First (CSPF) for a Make-before-break (MBB)
path should give preference to hops/links … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.6.7.1.42 |
| vRtrMplsGenBypassNextResignal The value of vRtrMplsGenBypassNextResignal indicates the time
remaining, in minutes, for the vRtrMplsGeneralBypassResigTimer to
expire. | column | minutes SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.7.1.44 |
| vRtrMplsGeneralNewLspSRIndex The value of vRtrMplsGeneralNewLspSRIndex is used to specify values
assigned to vRtrMplsLspIndex for Segment Routing LSPs.
The network manager reads the object, and… | column | SNMPv2-TCTestAndIncr | .1.3.6.1.4.1.6527.3.1.2.6.7.1.45 |
| vRtrMplsGeneralPceReport The set of configured TE properties for this LSP expressed as a bit
map. | column | Bits | .1.3.6.1.4.1.6527.3.1.2.6.7.1.46 |
| vRtrMplsGeneralEntropyLblRsvpTe The value of vRtrMplsGeneralEntropyLblRsvpTe specifies whether the
application takes into account the value of Entropy Label and Entropy
Label Capability in the label stack for RS… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.6.7.1.47 |
| vRtrMplsGeneralEntropyLblSrTe The value of vRtrMplsGeneralEntropyLblSrTe specifies whether the
application takes into account the value of Entropy Label and Entropy
Label Capability in the label stack for SR-T… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.6.7.1.48 |
| vRtrMplsGeneralAuxStats The value of vRtrMplsGeneralAuxStats specifies which types of labeled
traffic are counted in the MPLS auxiliary statistics table.
By default, all labeled traffic i… | column | Bits | .1.3.6.1.4.1.6527.3.1.2.6.7.1.49 |
| vRtrMplsGeneralTE obsolete The value of vRtrMplsGeneralTE specifies the type of traffic
engineering used with this MPLS instance.
This object was made obsolete in release 11.0. | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.6.7.1.5 |
| vRtrMplsGenSrTeResignalTimer The value of vRtrMplsGenSrTeResignalTimer specifies the value for the
SR-TE LSPs resignal timer, that is the time, in minutes, the software
will wait before attempting to resignal… | column | minutes Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.7.1.50 |
| vRtrMplsGenMaxBypassPlrAssoc The value of vRtrMplsGenMaxBypassPlrAssoc specifies the maxiumum
bypass PLR assocations. | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.7.1.51 |
| vRtrMplsGenLspSelfPingInterval The value of vRtrMplsGenLspSelfPingInterval specifies the interval
duration at which LSP self ping packets are sent until a reply is
received from the far end of the session ID. | column | seconds Integer32 | .1.3.6.1.4.1.6527.3.1.2.6.7.1.52 |
| vRtrMplsGenLspSelfPingTimeout The value of vRtrMplsGenLspSelfPingTimeout specifies the value of
timeout expiry duration up to which the lsp-self-ping packets will be
sent. If the timeout expires before an LSP … | column | seconds Integer32 | .1.3.6.1.4.1.6527.3.1.2.6.7.1.53 |
| vRtrMplsGenLspSelfPingRsvpTe The value of vRtrMplsGenLspSelfPingRsvpTe specifies whether the
application takes into account the value of Self Ping in the label
stack of RSVP-TE LSPs.
When the v… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.6.7.1.54 |
| vRtrMplsGenSrTeResigOnIgpEvent The value of vRtrMplsGenSrTeResigOnIgpEvent specifies re-optimization
of SR-TE LSPs triggered by IGP events is enabled or disabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.6.7.1.55 |
| vRtrMplsGeneralV6OperState vRtrMplsGeneralV6OperState indicates the current operating state of
MPLS protocol instance on this router for srte ipv6. | column | TIMETRA-TC-MIBTmnxOperState | .1.3.6.1.4.1.6527.3.1.2.6.7.1.56 |
| vRtrMplsGeneralV6OperDownReason The value of vRtrMplsGeneralV6OperDownReason indicates the reason due
to which the MPLS instance is operationally down for srte ipv6. | column | TmnxMplsOperDownReasonCode | .1.3.6.1.4.1.6527.3.1.2.6.7.1.57 |
| vRtrMplsGenSrteNextResignal The value of vRtrMplsGenSrteNextResignal indicates the time remaining,
in minutes, for the vRtrMplsGenSrTeResignalTimer to expire. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.7.1.58 |
| vRtrMplsLspSelfPingTimeoutAction The value of vRtrMplsLspSelfPingTimeoutAction specifies the timeout
action of Self Ping for RSVP-TE LSPs.
When the value of vRtrMplsLspSelfPingTimeoutAction is set… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.6.7.1.59 |
| vRtrMplsGeneralNewLspIndex This object is used to assign values to vRtrMplsLspIndex as
described in 'Textual Conventions for SNMPv2'. The network
manager reads the object, and then writes the value back
in… | column | SNMPv2-TCTestAndIncr | .1.3.6.1.4.1.6527.3.1.2.6.7.1.6 |
| vRtrMplsGenResignalOnIgpOverload The value of vRtrMplsGenResignalOnIgpOverload specifies whether or not
RSVP-TE LSPs will be resignaled when IGP overload bit is received.
When the value of vRtrMpls… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.6.7.1.60 |
| vRtrMplsGeneralOptimizeTimer The value of vRtrMplsGeneralOptimizeTimer specifies the time, in
seconds, the software will wait before attempting to re-optimize the
LSPs.
When CSPF is enabled, ch… | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.7.1.7 |
| vRtrMplsGeneralFRObject The value of vRtrMplsGeneralFRObject specifies whether fast reroute,
for LSPs using 'Facility Backup', is signalled with or without the
fast reroute object. The value of vRtrMplsG… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.6.7.1.8 |
| vRtrMplsGeneralResignalTimer The value of vRtrMplsGeneralResignalTimer specifies the value for the
P2P (point-to-point) LSP resignal timer, that is the time, in minutes,
the software will wait before attempti… | column | minutes Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.7.1.9 |