tMirrorLiX3EndIpAddrType
TIMETRA-MIRROR-MIB ·
.1.3.6.1.4.1.6527.3.1.2.18.5.301.103.5
Object
The value of tMirrorLiX3EndIpAddrType specifies the type of address
stored in tMirrorLiX3EndIpAddr.
The value 'unknown' means that no value is configured for
tMirrorLiX3EndIpAddr.
Context
- MIB
- TIMETRA-MIRROR-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.18.5.301.103.5- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- tMirrorLiX3
- Siblings
- 19
Syntax
INET-ADDRESS-MIBInetAddressType
- Source
- INET-ADDRESS-MIBInetAddressType
- Base type
Enumeration
Values & Constraints
Type Values
0 | unknown |
1 | ipv4 |
2 | ipv6 |
3 | ipv4z |
4 | ipv6z |
16 | dns |
25 | l2vpn |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tMirrorLiX3LastCh The value of tMirrorLiX3LastCh indicates the sysUpTime at the time of
the most recent change to any writable object in the tMirrorLiX3
group. | scalar | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.3.1.2.18.5.301.103.1 |
| tMirrorLiX3ToTunnelReq The value of tMirrorLiX3ToTunnelReq specifies the value of the
Tx3-normal timer; for this system, the Tx3-normal timer is a timeout
on the 'X3createLicctunnelReq' message sent.
… | scalar | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.18.5.301.103.10 |
| tMirrorLiX3ToKeepalive The value of tMirrorLiX3ToKeepalive specifies the value of the
Tx3-checkstate timer.
After sending a 'X3CheckStateReq' message, if this system does not
receive the 'x3C… | scalar | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.18.5.301.103.11 |
| tMirrorLiX3ToTargetRetryWait The value of tMirrorLiX3ToTargetRetryWait specifies the value of the
Tx3-retry time.
After a failed tunnel setup, and as long as the associated target is
active, this s… | scalar | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.18.5.301.103.12 |
| tMirrorLiX3CpuAlarm The value of tMirrorLiX3CpuAlarm specifies if the system issues an
alarm when the CPU usage of one of the ISA MDA's in the ISA-BB group
exceeds the configured threshold.
… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.18.5.301.103.13 |
| tMirrorLiX3CpuAlarmHighThreshold The value of tMirrorLiX3CpuAlarmHighThreshold specifies the high
threshold of the CPU usage alarm for each MDA in the ISA-BB group.
The value of this object must be set… | scalar | percent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.18.5.301.103.14 |
| tMirrorLiX3CpuAlarmLowThreshold The value of tMirrorLiX3CpuAlarmLowThreshold specifies the low
threshold of the CPU usage alarm for each MDA in the ISA-BB group.
The value of this object must be set t… | scalar | percent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.18.5.301.103.15 |
| tMirrorLiX3MemAlarm The value of tMirrorLiX3MemAlarm specifies if the system issues an
alarm when the packet buffer memory usage of one of the ISA MDA's in
the ISA-BB group exceeds the configured thr… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.18.5.301.103.16 |
| tMirrorLiX3MemAlarmHighThreshold The value of tMirrorLiX3MemAlarmHighThreshold specifies the high
threshold of the packet buffer memory usage alarm for each MDA in the
ISA-BB group.
The value of this o… | scalar | percent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.18.5.301.103.17 |
| tMirrorLiX3MemAlarmLowThreshold The value of tMirrorLiX3MemAlarmLowThreshold specifies the low
threshold of the packet buffer memory usage alarm for each MDA in the
ISA-BB group.
The value of this obj… | scalar | percent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.18.5.301.103.18 |
| tMirrorLiX3BwAlarm The value of tMirrorLiX3BwAlarm specifies if the system issues an
alarm when the throughput of one of the ISA MDA's in the ISA-BB group
exceeds the configured threshold.
… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.18.5.301.103.19 |
| tMirrorLiX3LiGroup The value of tMirrorLiX3LiGroup specifies the ISA-BB group of the X3
interface.
While a nonzero value for this object is specified, the X3 interface
processing is done … | scalar | TIMETRA-TC-MIBTmnxIsaBbGrpId | .1.3.6.1.4.1.6527.3.1.2.18.5.301.103.2 |
| tMirrorLiX3BwAlarmHighThreshold The value of tMirrorLiX3BwAlarmHighThreshold specifies the high
threshold of the throughput alarm for each MDA in the ISA-BB group.
The value of this object must be set… | scalar | megabps SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.18.5.301.103.20 |
| tMirrorLiX3BwAlarmLowThreshold The value of tMirrorLiX3BwAlarmLowThreshold specifies the low
threshold of the throughput alarm for each MDA in the ISA-BB group.
The value of this object must be set t… | scalar | Mpbs SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.18.5.301.103.21 |
| tMirrorLiX3StartIpAddrType The value of tMirrorLiX3StartIpAddrType specifies the type of address
stored in tMirrorLiX3StartIpAddr.
The value 'unknown' means that no value is configured for
tMirro… | scalar | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.6527.3.1.2.18.5.301.103.3 |
| tMirrorLiX3OperState The value of tMirrorLiX3OperState indicates the operational state of
the X3 interface. | scalar | Enumeration | .1.3.6.1.4.1.6527.3.1.2.18.5.301.103.31 |
| tMirrorLiX3StartIpAddr The value of tMirrorLiX3StartIpAddr specifies the start of the IP
address range of this system on the X3 interface.
This system will use addresses of this range as sour… | scalar | OctetString | .1.3.6.1.4.1.6527.3.1.2.18.5.301.103.4 |
| tMirrorLiX3EndIpAddr The value of tMirrorLiX3EndIpAddr specifies the end of the IP address
range of this system on the X3 interface.
This system will use addresses of this range as source I… | scalar | OctetString | .1.3.6.1.4.1.6527.3.1.2.18.5.301.103.6 |
| tMirrorLiX3MaxNumSessions The value of tMirrorLiX3MaxNumSessions specifies the maximum number of
X3 sessions this system sets up.
If this number is set to a value higher than the number of X3 pe… | scalar | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.18.5.301.103.7 |