vRtrLdpNgTargPeerOprHelloTimeout
TIMETRA-LDP-NG-MIB ·
.1.3.6.1.4.1.6527.3.1.2.91.38.1.14
Object
column
seconds Unsigned32
The value of vRtrLdpNgTargPeerOprHelloTimeout indicates the operational hello time also known as hold time used by the operational targeted peer. It is the time interval that LDP waits before declaring a neighbor to be down.
Context
- MIB
- TIMETRA-LDP-NG-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.91.38.1.14- Type
- column
- Access
- readonly
- Status
- current
- Units
- seconds
- Parent
- vRtrLdpNgTargPeerEntry
- Table
- vRtrLdpNgTargPeerTable
- Siblings
- 28
Syntax
seconds Unsigned32
Values & Constraints
Object Constraints
range: 3-65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vRtrLdpNgPeerAddressType The value of vRtrLdpNgPeerAddressType specifies the address family
type for vRtrLdpNgPeerAddress. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.6527.3.1.2.91.38.1.1 |
| vRtrLdpNgTargPeerKAFactor The value of vRtrLdpNgTargPeerKAFactor specifies the value by which
the keepalive timeout (vRtrLdpNgTargPeerKATimeout) should be divided
to give the keepalive time i.e. the time i… | column | TIMETRA-LDP-MIBTmnxLdpKeepAliveFactor | .1.3.6.1.4.1.6527.3.1.2.91.38.1.10 |
| vRtrLdpNgTargPeerKATimeout The value of vRtrLdpNgTargPeerKATimeout specifies the time interval,
in seconds, that LDP waits before tearing down a session. If no LDP
messages are exchanged during this time in… | column | seconds TIMETRA-LDP-MIBTmnxLdpNewKeepAliveTimeout | .1.3.6.1.4.1.6527.3.1.2.91.38.1.11 |
| vRtrLdpNgTargPeerHelloFactor The value of vRtrLdpNgTargPeerHelloFactor specifies the value by which
the hello timeout (vRtrLdpNgTargPeerHelloTimeout) should be divided to
give the hello time i.e. the time int… | column | TIMETRA-LDP-MIBTmnxLdpHelloFactor | .1.3.6.1.4.1.6527.3.1.2.91.38.1.12 |
| vRtrLdpNgTargPeerHelloTimeout The value of vRtrLdpNgTargPeerHelloTimeout specifies the hello time also
known as hold time. It is the time interval, in seconds, that LDP waits
before declaring a neighbor to be … | column | seconds TIMETRA-LDP-MIBTmnxLdpNewHelloTimeout | .1.3.6.1.4.1.6527.3.1.2.91.38.1.13 |
| vRtrLdpNgTargPeerHelloReduction The value of vRtrLdpNgTargPeerHelloReduction specifies whether hello
reduction to this targeted peer is enabled or not. If enabled, the
sender advertises the dampened vRtrLdpNgTar… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.91.38.1.15 |
| vRtrLdpNgTargPeerHelloRdctnFctr The value of vRtrLdpNgTargPeerHelloRdctnFctr specifies the number of
hello messages that are sent at consistent
vRtrLdpNgTargPeerHelloTimeout value before advertising further
damp… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.91.38.1.16 |
| vRtrLdpNgTargPeerBackoffTime The value of vRtrLdpNgTargPeerBackoffTime specifies the initial value
for the backoff interval.
The backoff interval is the time, in seconds, that LDP waits after a… | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.91.38.1.17 |
| vRtrLdpNgTargPeerMaxBackoffTime The value of vRtrLdpNgTargPeerMaxBackoffTime specifies the maximum
value for the backoff interval.
For each successive failure of the LDP session startup, the backo… | column | seconds TIMETRA-LDP-MIBTmnxLdpBackoffTime | .1.3.6.1.4.1.6527.3.1.2.91.38.1.18 |
| vRtrLdpNgTargPeerTunneling The value of vRtrLdpNgTargPeerTunneling specifies whether tunneling of
unicast LDP FECs over tunnels is enabled. When this object has a value
of 'true', tunneling is enabled. When… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.91.38.1.19 |
| vRtrLdpNgPeerAddress vRtrLdpNgPeerAddress specifies the targeted peer IP address. | column | OctetString | .1.3.6.1.4.1.6527.3.1.2.91.38.1.2 |
| vRtrLdpNgTargPeerBfdEnabled The value of vRtrLdpNgTargPeerBfdEnabled specifies whether BFD
tracking is enabled to the transport address of this peering session.
When this object has a value of 'true', BFD tr… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.91.38.1.20 |
| vRtrLdpNgTargPeerLsrIfIndex The value of vRtrLdpNgTargPeerLsrIfIndex specifies the local interface
index that is to be used as source LSR-ID to establish targeted hello
adjacency with a LDP peer. | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.6527.3.1.2.91.38.1.21 |
| vRtrLdpNgTargPeerAutoCreate The value of vRtrLdpNgTargPeerAutoCreate indicates whether or not the
row entry was automatically created. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.91.38.1.22 |
| vRtrLdpNgTargPeerCreator The value of vRtrLdpNgTargPeerCreator indicates the creator of this
row.
A value of 'manual(1)' indicates the entry is created manually by the
user.
… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.91.38.1.23 |
| vRtrLdpNgTargPeerTemplName The value of vRtrLdpNgTargPeerTemplName specifies the template name
that created this row. This object has valid value when
vRtrLdpNgTargPeerCreator has value of template. | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.91.38.1.24 |
| vRtrLdpNgTargPeerLocalIpAddrType The value of vRtrLdpNgTargPeerLocalIpAddrType indicates the type of
address indicated by vRtrLdpNgTargPeerLocalIpAddress. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.6527.3.1.2.91.38.1.25 |
| vRtrLdpNgTargPeerLocalIpAddress The value of vRtrLdpNgTargPeerLocalIpAddress indicates the local IP
address used in Hellos sent. | column | OctetString | .1.3.6.1.4.1.6527.3.1.2.91.38.1.26 |
| vRtrLdpNgTargPeer32BitLsrFormat The value of vRtrLdpNgTargPeer32BitLsrFormat specifies whether to use
32-bit address as source Label Switch Router identifier (LSR-ID) to
establish a targeted LDP adjacency with a… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.91.38.1.28 |
| vRtrLdpNgTargPeerLsrIdAdvert The value of vRtrLdpNgTargPeerLsrIdAdvert is only relevant if
vRtrLdpNgTargPeerCreator in the same row has the value 'template'. If
that is the case, the value of vRtrLdpNgTargPee… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.91.38.1.29 |
| vRtrLdpNgTargPeerRowStatus vRtrLdpNgTargPeerRowStatus is used to control the creation and
deletion of rows in the vRtrLdpNgTargPeerTable.
A row can be created by setting vRtrLdpNgTargPeerRowS… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6527.3.1.2.91.38.1.3 |
| vRtrLdpNgTargPeerCommunity The value of vRtrLdpNgTargPeerCommunity is only relevant if
vRtrLdpNgTargPeerCreator in the same row has the value 'template'. If
that is the case, the value of vRtrLdpNgTargPeerC… | column | TIMETRA-TC-MIBTPolicyStatementNameOrEmpty | .1.3.6.1.4.1.6527.3.1.2.91.38.1.30 |
| vRtrLdpNgTargPeerLastChange The value of vRtrLdpNgTargPeerLastChange indicates the sysUpTime when
this row was last modified. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.3.1.2.91.38.1.4 |
| vRtrLdpNgTargPeerAdminState The value of vRtrLdpNgTargPeerAdminState specifies the desired
administrative state for this LDP targeted peer. | column | TIMETRA-TC-MIBTmnxAdminState | .1.3.6.1.4.1.6527.3.1.2.91.38.1.5 |
| vRtrLdpNgTargPeerOperState The value of vRtrLdpNgTargPeerOperState indicates the current
operational state of LDP targeted peer. | column | TIMETRA-TC-MIBTmnxOperState | .1.3.6.1.4.1.6527.3.1.2.91.38.1.6 |
| vRtrLdpNgTargPeerUpTime The value of vRtrLdpNgTargPeerUpTime indicates the time, in hundreds
of seconds, that the targeted peer has been in current operational
state vRtrLdpNgTargPeerOperState.
… | column | SNMPv2-TCTimeInterval | .1.3.6.1.4.1.6527.3.1.2.91.38.1.7 |
| vRtrLdpNgTargPeerOperDownReason The value of vRtrLdpNgTargPeerOperDownReason indicates the operational
down reason for targeted peer. | column | TIMETRA-LDP-MIBTmnxLdpIntTargOperDownReasonCode | .1.3.6.1.4.1.6527.3.1.2.91.38.1.8 |
| vRtrLdpNgTargPeerInheritance Some writable object in this row that can be configured to inherit its
value from its corresponding object in the vRtrLdpNgGeneralTable.
vRtrLdpNgTargPeerInheritance controls whet… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.91.38.1.9 |