tmnxL2tpTuMlpppAdminState
TIMETRA-L2TP-MIB ·
.1.3.6.1.4.1.6527.3.1.2.60.1.3.1.4.1.2
Object
The value of tmnxL2tpTuMlpppAdminState specifies the administrative
state of MLPPP for this Layer Two Tunneling Protocol Tunnel.
The value 'noop' specifies that the actual value must be used of the
object tmnxL2tpTgMlpppAdminState of the tunnel group this tunnel
configuration belongs to.
Context
- MIB
- TIMETRA-L2TP-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.60.1.3.1.4.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- tmnxL2tpTuMlpppEntry
- Table
- tmnxL2tpTuMlpppTable
- Siblings
- 9
Syntax
TIMETRA-TC-MIBTmnxAdminState
- Source
- TIMETRA-TC-MIBTmnxAdminState
- Base type
Enumeration
Values & Constraints
Type Values
1 | noop |
2 | inService |
3 | outOfService |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tmnxL2tpTuMlpppLastMgmtChange The value of tmnxL2tpTuMlpppLastMgmtChange indicates the sysUpTime at
the time of the most recent management-initiated change to this table
row. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.3.1.2.60.1.3.1.4.1.1 |
| tmnxL2tpTuMlpppEpMacAddress The value of tmnxL2tpTuMlpppEpMacAddress specifies the class 3 address
to use in the MLPPP Endpoint Discriminator Option.
While the value of tmnxL2tpTuMlpppEpClass … | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.6527.3.1.2.60.1.3.1.4.1.10 |
| tmnxL2tpTuMlpppMaxLinks The value of the object tmnxL2tpTuMlpppMaxLinks specifies the maximum
number of MLPPP links.
The value of this object is only relevant for tunnels where this
system… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.60.1.3.1.4.1.3 |
| tmnxL2tpTuMlpppInterleave The value of tmnxL2tpTuMlpppInterleave specifies if this system
applies Link Fragmentation and Interleaving to the traffic sent from
the LNS to the LAC.
If the valu… | column | TmnxAlwaysNeverOrDefault | .1.3.6.1.4.1.6527.3.1.2.60.1.3.1.4.1.4 |
| tmnxL2tpTuMlpppMaxFragDelay The value of tmnxL2tpTuMlpppMaxFragDelay specifies the maximum delay
of fragments for this L2TP Tunnel.
The value zero specifies that the actual value must be used … | column | milliseconds TmnxL2tpMlpppMaxFragDelay | .1.3.6.1.4.1.6527.3.1.2.60.1.3.1.4.1.5 |
| tmnxL2tpTuMlpppReassemblyTo The value of tmnxL2tpTuMlpppReassemblyTo specifies the reassembly
timeout for fragments for this L2TP Tunnel.
The value zero specifies that the actual value must be… | column | milliseconds TmnxL2tpMlpppReassemblyTimeout | .1.3.6.1.4.1.6527.3.1.2.60.1.3.1.4.1.6 |
| tmnxL2tpTuMlpppShortSeqNumberRx The value of tmnxL2tpTuMlpppShortSeqNumberRx specifies if this system
requests to receive short sequence numbers from the peer.
If the value of this object is 'alwa… | column | TmnxAlwaysNeverOrDefault | .1.3.6.1.4.1.6527.3.1.2.60.1.3.1.4.1.7 |
| tmnxL2tpTuMlpppEpClass The value of tmnxL2tpTuMlpppEpClass specifies the type of endpoint.
If the value of 'tmnxL2tpTuMlpppEpClass' is equal to 'ipv4Address',
the address for the MLPPP En… | column | TmnxL2tpMlpppEndpointClass | .1.3.6.1.4.1.6527.3.1.2.60.1.3.1.4.1.8 |
| tmnxL2tpTuMlpppEpIpv4Address The value of tmnxL2tpTuMlpppEpIpv4Address specifies the class 2
address to use in the MLPPP Endpoint Discriminator Option.
While the value of tmnxL2tpTuMlpppEpClass… | column | OctetString | .1.3.6.1.4.1.6527.3.1.2.60.1.3.1.4.1.9 |