tmnxIsisLSPAttributes
TIMETRA-ISIS-NG-MIB ·
.1.3.6.1.4.1.6527.3.1.2.88.1.7.1.10
Object
column
SNMPv2-SMIInteger32
The value of the object tmnxIsisLSPAttributes indicates the attributes
associated with the LSP and these include the attached bit, overload
bit, IS type of the system originating the LSP and the partition
repair capability.
The attached bit and the overload bit are of significance only when
present in the LSP numbered zero and should be ignored on receipt in
any other LSP.
Context
- MIB
- TIMETRA-ISIS-NG-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.88.1.7.1.10- Type
- column
- Access
- readonly
- Status
- current
- Parent
- tmnxIsisLSPEntry
- Table
- tmnxIsisLSPTable
- Siblings
- 13
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tmnxIsisLSPId The value of the object tmnxIsisLSPId specifies the LSP Id and is
given in the format as 6 octets of adjacency system-id followed by 1
octet Lan-ID and 1 octet LSP Number. | column | OctetString | .1.3.6.1.4.1.6527.3.1.2.88.1.7.1.1 |
| tmnxIsisLSPUsedLen The value of the object tmnxIsisLSPUsedLen indicates the used length
for the LSP.
For an LSP that is not self originated, the used length is always
equal to tmnxIsi… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6527.3.1.2.88.1.7.1.11 |
| tmnxIsisLSPAllocLen The value of the object tmnxIsisLSPAllocLen indicates the length
allocated for the LSP to be stored. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6527.3.1.2.88.1.7.1.12 |
| tmnxIsisLSPBuff The value of the object tmnxIsisLSPBuff indicates the LSP as existing
in the LSP database. | column | OctetString | .1.3.6.1.4.1.6527.3.1.2.88.1.7.1.13 |
| tmnxIsisLSPZeroRLT The value of the object tmnxIsisLSPZeroRLT indicates the LSP state if
it has once reached zero remaining lifetime.
If this object is 'true' then the object tmnxIsis… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.88.1.7.1.14 |
| tmnxIsisLSPSeq The value of the object tmnxIsisLSPSeq indicates the sequence number
of an LSP and is a four byte quantity that represents the version of
an LSP.
The higher the seq… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6527.3.1.2.88.1.7.1.2 |
| tmnxIsisLSPChecksum The value of the object tmnxIsisLSPChecksum indicates the checksum of
contents of LSP from the SourceID field in the LSP till the end.
The checksum is computed usin… | column | Integer32 | .1.3.6.1.4.1.6527.3.1.2.88.1.7.1.3 |
| tmnxIsisLSPLifetimeRemain The value of the object tmnxIsisLSPLifetimeRemain indicates the
Remaining lifetime of this LSP and is a decrementing counter that
decrements in seconds starting from the value as … | column | seconds Integer32 | .1.3.6.1.4.1.6527.3.1.2.88.1.7.1.4 |
| tmnxIsisLSPVersion The value of the object tmnxIsisLSPVersion indicates the version of
the ISIS protocol that has generated the LSP | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6527.3.1.2.88.1.7.1.5 |
| tmnxIsisLSPPktType The value of the object tmnxIsisLSPPktType indicates the packet type
for instance Hello PDUs, LSPs, CSNPs OR PSNPs at both IS-IS protocol
levels i.e. L1 and L2 as maintained in tm… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6527.3.1.2.88.1.7.1.6 |
| tmnxIsisLSPPktVersion The value of the object tmnxIsisLSPPktVersion indicates the version of
the ISIS protocol that has generated the Packet. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6527.3.1.2.88.1.7.1.7 |
| tmnxIsisLSPMaxArea The value of the object tmnxIsisLSPMaxArea indicates the maximum
number of areas supported by the originator of the LSP.
A value of 0 for tmnxIsisLSPMaxArea indicat… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6527.3.1.2.88.1.7.1.8 |
| tmnxIsisLSPSysIdLen The value of the object tmnxIsisLSPSysIdLen indicates the length of
the system-id as used by the originator. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6527.3.1.2.88.1.7.1.9 |