tmnxDot1agCfmMepSlmOWTargetMepId
TIMETRA-IEEE8021-CFM-MIB ·
.1.3.6.1.4.1.6527.3.1.2.52.7.5.1.8
Object
The value of tmnxDot1agCfmMepSlmOWTargetMepId specifies the Maintenance association End Point Identifier (MepId) of another MEP in the same Maintenance Association that the Synthetic Loss Measurement (SLM) messages should be directed to. If the tmnxDot1agCfmMepSlmOWTargetMepId is set then a local lookup for the target MEP destination MAC address will be performed when the test is started. Note that a valid target destination MAC address must be found for proper execution of the one-way SLM test if the tmnxDot1agCfmMepSlmOWTargetMepId is being used as the input for the test. The tmnxDot1agCfmMepSlmOWTargetMepId cannot be set if the tmnxDot1agCfmMepSlmOWMacAddress is set to a non-zero value.
Context
- MIB
- TIMETRA-IEEE8021-CFM-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.52.7.5.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- tmnxDot1agCfmMepSlmOWTestEntry
- Table
- tmnxDot1agCfmMepSlmOWTestTable
- Siblings
- 8
Syntax
IEEE8021-CFM-MIBDot1agCfmMepIdOrZero
- Source
- IEEE8021-CFM-MIBDot1agCfmMepIdOrZero
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..8191
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tmnxDot1agCfmMepSlmOWTestStatus The value of tmnxDot1agCfmMepSlmOWTestStatus specifies the operational
state of the one-way Synthetic Loss Measurement (SLM) test.
To issue a one-way SLM test the u… | column | TIMETRA-TC-MIBTmnxEnabledDisabled | .1.3.6.1.4.1.6527.3.1.2.52.7.5.1.1 |
| tmnxDot1agCfmMepSlmOWTestId The value of tmnxDot1agCfmMepSlmOWTestId indicates the test identifier
used to initiate the one-way Synthetic Loss Measurement (SLM) test. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.52.7.5.1.2 |
| tmnxDot1agCfmMepSlmOWMacAddress The value of tmnxDot1agCfmMepSlmOWMacAddress specifies the MAC address
used as a target for the one-way Synthetic Loss Measurement (SLM)
Test.
This object MUST be s… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.6527.3.1.2.52.7.5.1.3 |
| tmnxDot1agCfmMepSlmOWPriority The value of tmnxDot1agCfmMepSlmOWPriority specifies the priority used
in the generated test frame for the one-way Synthetic Loss Measurement
(SLM) test. | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.52.7.5.1.4 |
| tmnxDot1agCfmMepSlmOWInterval The value of tmnxDot1agCfmMepSlmOWInterval specifies the delay, in
seconds, between Synthetic Loss Measurement (SLM) messages for the
one-way SLM test. | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.52.7.5.1.5 |
| tmnxDot1agCfmMepSlmOWDataSize The value of tmnxDot1agCfmMepSlmOWDataSize specifies the data size, in
bytes, contained in the padding TLV for the one-way Synthetic Loss
Measurement (SLM) test. A value of zero (… | column | bytes Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.52.7.5.1.6 |
| tmnxDot1agCfmMepSlmOWSendCount The value of tmnxDot1agCfmMepSlmOWSendCount specifies the number of
Synthetic Loss Measurement (SLM) packets to send consecutively during
the one-way SLM test. | column | packets Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.52.7.5.1.7 |
| tmnxDot1agCfmMepSlmOWLstDstMac The value of tmnxDot1agCfmMepSlmOWLstDstMac indicates the
destination MAC addressed used in the most recent one-way SLM Test.
If there is no information about a previous test run,… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.6527.3.1.2.52.7.5.1.9 |