tmnxDot3OamTriggerFault
TIMETRA-DOT3-OAM-MIB ·
.1.3.6.1.4.1.6527.3.1.2.42.1.1.1.20
Object
column
r/w
Enumeration
The value of tmnxDot3OamTriggerFault specifies the type of fault which
is triggered.
If the value of tmnxDot3OamTriggerFault is set to a value other than
'none (1)', EFM-OAM will bring the port operationally down (if it was
not already), and set the appropriate fault flag in all subsequent
Information OAMPDUs transmitted to the peer.
If the value of tmnxDot3OamTriggerFault is set to 'none (1)', EFM-OAM
will affect the port state as it would during normal operation and
will not set the configured fault flags in the Information OAMPDUs
transmitted to the peer unless some other configuration or state
causes it to do so.
Context
- MIB
- TIMETRA-DOT3-OAM-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.42.1.1.1.20- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- tmnxDot3OamEntry
- Table
- tmnxDot3OamTable
- Siblings
- 20
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | none |
2 | dyingGasp |
3 | criticalEvent |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tmnxDot3OamLastChanged The value of tmnxDot3OamLastChanged indicates the sysUpTime value when
this row was last modified. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.3.1.2.42.1.1.1.1 |
| tmnxDot3OamPrRdiRxDyingGasp The value of tmnxDot3OamPrRdiRxDyingGasp specifies how the local port
will be impacted when it receives an Information OAMPDU from the peer
with the dying gasp flag set. | column | TmnxLocalPortAction | .1.3.6.1.4.1.6527.3.1.2.42.1.1.1.10 |
| tmnxDot3OamPrRdiRxCriticalEvent The value of tmnxDot3OamPrRdiRxCriticalEvent specifies how the local
port will be impacted when it receives an Information OAMPDU from the
peer with the critical event flag set. | column | TmnxLocalPortAction | .1.3.6.1.4.1.6527.3.1.2.42.1.1.1.11 |
| tmnxDot3OamPrRdiRxLinkFault The value of tmnxDot3OamPrRdiRxLinkFault specifies how the local port
will be impacted when it receives an Information OAMPDU from the peer
with the link fault flag set. | column | TmnxLocalPortAction | .1.3.6.1.4.1.6527.3.1.2.42.1.1.1.12 |
| tmnxDot3OamPrRdiRxEventNotif The value of tmnxDot3OamPrRdiRxEventNotif specifies how the local port
will be impacted when it receives an Event Notification OAMPDU from
the peer. The Event TLVs contained in th… | column | TmnxLocalPortAction | .1.3.6.1.4.1.6527.3.1.2.42.1.1.1.13 |
| tmnxDot3OamDiscAdCapLinkMon The value of tmnxDot3OamDiscAdCapLinkMon specifies whether or not the
link monitoring capabilities will be advertised to the OAM peer when
tmnxDot3OamLinkMonEnabled is set to 'ena… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.42.1.1.1.14 |
| tmnxDot3OamVendorOui The value of tmnxDot3OamVendorOui indicates the Organizationally
Unique Identifier (OUI) which can be used to identify the vendor of
the local EFM-OAM entity. This OUI is included… | column | DOT3-OAM-MIBEightOTwoOui | .1.3.6.1.4.1.6527.3.1.2.42.1.1.1.15 |
| tmnxDot3OamVendorInfo The value of tmnxDot3OamVendorInfo indicates the information that is
included in the Vendor Information field of the Local Information TLV
of every Information OAMPDU transmitted … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.42.1.1.1.16 |
| tmnxDot3OamGraceVendorOui The value of tmnxDot3OamGraceVendorOui specifies an additional vendor
OUI which indicates support for the vendor specific EFM-OAM grace
functionality which is invoked during soft … | column | DOT3-OAM-MIBEightOTwoOui | .1.3.6.1.4.1.6527.3.1.2.42.1.1.1.17 |
| tmnxDot3OamDyingGaspOnReset The value of tmnxDot3OamDyingGaspOnReset specifies whether the EFM-OAM
entity will transmit dying gasp messages on the port when a reset
condition occurs.
Dying gas… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.42.1.1.1.18 |
| tmnxDot3OamDyingGaspOnResetState The value of tmnxDot3OamDyingGaspOnResetState indicates whether or not
the node is transmitting Information OAMPDUs to the peer with the
dying-gasp flag set.
Dying … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.42.1.1.1.19 |
| tmnxDot3OamInterval The value of tmnxDot3OamInterval specifies the number of 100ms
time intervals between each periodic OAMPDU transmit and receive.
A lower value implies that OAMPDUs will be transmi… | column | deciseconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.42.1.1.1.2 |
| tmnxDot3OamSoftResetAction The value of tmnxDot3OamSoftResetAction indicates which functionality
is executed when a soft reset is invoked.
Values:
none (1) - no messages are sent
… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.42.1.1.1.21 |
| tmnxDot3OamMultiplier The value of tmnxDot3OamMultiplier specifies how many receive
intervals may expire with no OAMPDU receive. After the configured
number of intervals with OAMPDU receive have passe… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.42.1.1.1.3 |
| tmnxDot3OamTunneling The value of tmnxDot3OamTunneling specifies if OAMPDUs should
be passed transparently through the OAM entity for processing
by another OAM entity across the network, or if OAMPDUs… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.42.1.1.1.4 |
| tmnxDot3OamLooped The value of tmnxDot3OamLooped indicates if the OAM entity
is receiving OAMPDUs that it transmitted. A value of 'true'
indicates that the OAM entity is receiving it's own OAMPDUs… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.42.1.1.1.5 |
| tmnxDot3OamHoldTime The value of tmnxDot3OamHoldTime specifies the number of seconds
the efm-oam protocol should wait after dot3OamOperStatus transitions
from 'operational (9)' to a non-operational s… | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.42.1.1.1.6 |
| tmnxDot3OamIgnoreEfmState The value of tmnxDot3OamIgnoreEfmState specifies whether the efm-oam
status (dot3OamOperStatus) on a port will affect the operational
state of the port it is running on when efm-o… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.42.1.1.1.7 |
| tmnxDot3OamGraceTxEnabled The value of tmnxDot3OamGraceTxEnabled specifies whether the efm-oam
entity on a port will transmit grace-period messages.
When the value of tmnxDot3OamGraceTxEnabl… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.42.1.1.1.8 |
| tmnxDot3OamGraceTxState The value of tmnxDot3OamGraceTxState indicates whether or not the node
is locally executing a grace period. A value of 'true' indicates that
all peer timeouts are extended locally… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.42.1.1.1.9 |