tmnxCpmNoLocalIcPort

TIMETRA-CHASSIS-INTERCONNECT-MIB · .1.3.6.1.4.1.6527.3.1.3.94.0.2.5

Object

notification

[CAUSE] The tmnxCpmNoLocalIcPort alarm is generated when the CPM
cannot reach the other chassis using its local CPM interconnect ports.
          
[EFFECT] Another control communications path may still be available
between the CPM and the other chassis via the mate CPM in the same
chassis. If that alternative path is not available then complete
disruption of control communications to the other chassis will occur
and the tmnxInterChassisCommsDown alarm is raised.
          
A tmnxCpmNoLocalIcPort alarm on the active CPM indicates that a
further failure of the local CPM interconnect ports on the standby CPM
will cause complete disruption of control communications to the other
chassis and the tmnxInterChassisCommsDown alarm is raised.
          
A tmnxCpmNoLocalIcPort alarm on the standby CPM indicates that a CPM
switchover may cause temporary disruption of control communications to
the other chassis while the rebooting CPM comes back into service.
          
[RECOVERY] Ensure that all CPM interconnect ports in the system are
properly cabled together with working cables.

Context

MIB: TIMETRA-CHASSIS-INTERCONNECT-MIB
OID: .1.3.6.1.4.1.6527.3.1.3.94.0.2.5
Type: notification
Status: current
Parent: tmnxCpmIcPortNotifications
Siblings: 8

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
tmnxCpmIcPortDown [CAUSE] The tmnxCpmIcPortDown alarm is generated when the CPM interconnect port is not operational. The reason may be a cable connected incorrectly, a disconnected cable, a faulty…	notification	-	`.1.3.6.1.4.1.6527.3.1.3.94.0.2.1`
tmnxCpmIcPortUp [CAUSE] The tmnxCpmIcPortUp notification is generated when the CPM interconnect port is operational again. [EFFECT] A control plane communication path between CPM cards…	notification	-	`.1.3.6.1.4.1.6527.3.1.3.94.0.2.2`
tmnxCpmIcPortSFFInserted [CAUSE] The tmnxCpmIcPortSFFInserted notification is generated when the small form factor (SFF) pluggable optical module (e.g. QSFP) is inserted into a CPM interconnect port. …	notification	-	`.1.3.6.1.4.1.6527.3.1.3.94.0.2.3`
tmnxCpmIcPortSFFRemoved [CAUSE] The tmnxCpmIcPortSFFRemoved notification is generated when the SFF (e.g. QSFP) is removed from the CPM interconnect port. Removing an SFF causes both this trap, and also a…	notification	-	`.1.3.6.1.4.1.6527.3.1.3.94.0.2.4`
tmnxCpmLocalIcPortAvail [CAUSE] The tmnxCpmLocalIcPortAvail notification is generated when the CPM re-establishes communication with the other chassis using its local CPM interconnect ports. […	notification	-	`.1.3.6.1.4.1.6527.3.1.3.94.0.2.6`
tmnxCpmIcPortSFFStatusFailure [CAUSE] The tmnxCpmIcPortSFFStatusFailure notification is generated when the value of tmnxCpmIcPortSFFStatus results in a value other than 'not-equipped (0)', or 'operational (1)'…	notification	-	`.1.3.6.1.4.1.6527.3.1.3.94.0.2.7`
tmnxCpmIcPortDDMFailure [CAUSE] The tmnxCpmIcPortDDMFailure notification is generated when an SFF in a CPM interconnect port that supports Digital Diagnostic Monitoring (DDM) enters a failed state.	notification	-	`.1.3.6.1.4.1.6527.3.1.3.94.0.2.8`
tmnxCpmIcPortDDMClear [CAUSE] The tmnxCpmIcPortDDMFailure notification is generated when an SFF in a CPM interconnect port that supports Digital Diagnostic Monitoring (DDM) clears a failed state.	notification	-	`.1.3.6.1.4.1.6527.3.1.3.94.0.2.9`

Notification Objects

Object	Type	Syntax	OID
TIMETRA-CHASSIS-MIBtmnxHwClass The value of tmnxHwClass indicates the general hardware type of this component. If no appropriate enumeration exists for this hardware identify this hardware component then the …	column	TmnxHwClass	`.1.3.6.1.4.1.6527.3.1.2.2.1.8.1.7`
TIMETRA-CHASSIS-MIBtmnxChassisNotifyCpmCardSlotNum The unique value of tmnxChassisNotifyCpmCardSlotNum identifies the CPM slot within a chassis in the system.	scalar	TmnxSlotNum	`.1.3.6.1.4.1.6527.3.1.2.2.6.25`