teTunnelNextPathIndex
TE-MIB ·
.1.3.6.1.2.1.122.1.2.1.3
Object
column
SNMPv2-SMIUnsigned32
An integer that may be used as a new Index for the
next Path in this Tunnel.
The special value of 0 indicates that no more Paths
can be created for this Tunnel, or that no more new
entries can be created in tePathTable.
When this MIB module is used for configuration, this
object always contains a legal value (if non-zero)
for an index that is not currently used in that
table. The Command Generator (Network Management
Application) reads this variable and uses the
(non-zero) value read when creating a new row with
an SNMP SET. When the SET is performed, the Command
Responder (agent) must determine whether the value
is indeed still unused; Two Network Management
Applications may attempt to create a row
(configuration entry) simultaneously and use the
same value. If it is currently unused, the SET
succeeds, and the Command Responder (agent) changes
the value of this object according to an
implementation-specific algorithm. If the value is
in use, however, the SET fails. The Network
Management Application must then re-read this
variable to obtain a new usable value.
Context
- MIB
- TE-MIB
- OID
.1.3.6.1.2.1.122.1.2.1.3- Type
- column
- Access
- readonly
- Status
- current
- Parent
- teTunnelEntry
- Table
- teTunnelTable
- Siblings
- 24
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| teTunnelIndex A unique index that identifies a Tunnel. If the TE
Tunnel is considered an interface, then this index
must match the interface index of the corresponding
interface. Otherwise, t… | column | Unsigned32 | .1.3.6.1.2.1.122.1.2.1.1 |
| teTunnelState The operational state of the Tunnel. | column | Enumeration | .1.3.6.1.2.1.122.1.2.1.10 |
| teTunnelDiscontinuityTimer The value of sysUpTime on the most recent occasion
at which any one or more of this tunnel's counters
suffered a discontinuity. The relevant counters
are teTunnelOctets, teTunnel… | column | SNMPv2-TCTimeStamp | .1.3.6.1.2.1.122.1.2.1.11 |
| teTunnelOctets The number of octets that have been forwarded over
the Tunnel.
Discontinuities in the value of this counter can
occur at re-initialization of the management system,… | column | SNMPv2-SMICounter64 | .1.3.6.1.2.1.122.1.2.1.12 |
| teTunnelPackets The number of packets that have been forwarded over
the Tunnel.
Discontinuities in the value of this counter can
occur at re-initialization of the management system… | column | SNMPv2-SMICounter64 | .1.3.6.1.2.1.122.1.2.1.13 |
| teTunnelLPOctets The number of octets that have been forwarded over
the Tunnel.
Discontinuities in the value of this counter can
occur at re-initialization of the management system
… | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.122.1.2.1.14 |
| teTunnelLPPackets The number of packets that have been forwarded over
the Tunnel.
Discontinuities in the value of this counter can
occur at re-initialization of the management system… | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.122.1.2.1.15 |
| teTunnelAge The age (i.e., time from creation of this conceptual
row till now) of this Tunnel in hundredths of a
second. Note that because TimeTicks wrap in about
16 months, this value is be… | column | SNMPv2-SMITimeTicks | .1.3.6.1.2.1.122.1.2.1.16 |
| teTunnelTimeUp The total time in hundredths of a second that this
Tunnel has been operational. Note that because
TimeTicks wrap in about 16 months, this value is
best used in interval measureme… | column | SNMPv2-SMITimeTicks | .1.3.6.1.2.1.122.1.2.1.17 |
| teTunnelPrimaryTimeUp The total time in hundredths of a second that this
Tunnel's primary path has been operational. Note
that because TimeTicks wrap in about 16 months, this
value is b… | column | SNMPv2-SMITimeTicks | .1.3.6.1.2.1.122.1.2.1.18 |
| teTunnelTransitions The number of operational state transitions
(up -> down and down -> up) this Tunnel has
undergone. | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.122.1.2.1.19 |
| teTunnelName Name of the Traffic Tunnel.
Note that the name of a Tunnel MUST be unique.
When a SET request contains a name that is already
in use for another entry, then the imp… | column | OctetString | .1.3.6.1.2.1.122.1.2.1.2 |
| teTunnelLastTransition The time in hundredths of a second since the last
operational state transition occurred on this
Tunnel.
Note that if the last transition was over 16
months ago, thi… | column | SNMPv2-SMITimeTicks | .1.3.6.1.2.1.122.1.2.1.20 |
| teTunnelPathChanges The number of path changes this Tunnel has had. | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.122.1.2.1.21 |
| teTunnelLastPathChange The time in hundredths of a second since the last
path change occurred on this Tunnel.
Note that if the last transition was over 16
months ago, this value will be i… | column | SNMPv2-SMITimeTicks | .1.3.6.1.2.1.122.1.2.1.22 |
| teTunnelConfiguredPaths The number of paths configured for this Tunnel. | column | SNMPv2-SMIGauge32 | .1.3.6.1.2.1.122.1.2.1.23 |
| teTunnelStandbyPaths The number of standby paths configured for this
Tunnel. | column | SNMPv2-SMIGauge32 | .1.3.6.1.2.1.122.1.2.1.24 |
| teTunnelOperationalPaths The number of operational paths for this Tunnel.
This includes the path currently active, as
well as operational standby paths. | column | SNMPv2-SMIGauge32 | .1.3.6.1.2.1.122.1.2.1.25 |
| teTunnelRowStatus The status of this conceptual row.
When the value of this object is 'active', then
the values for the corresponding objects
teTunnelName, teTunnelSourceAddressType,… | column | SNMPv2-TCRowStatus | .1.3.6.1.2.1.122.1.2.1.4 |
| teTunnelStorageType The storage type for this conceptual row.
Conceptual rows having the value 'permanent' need
not allow write-access to any columnar objects
in the row. | column | SNMPv2-TCStorageType | .1.3.6.1.2.1.122.1.2.1.5 |
| teTunnelSourceAddressType The type of Traffic Engineered Tunnel hop address
for the source of this Tunnel. Typically, this
address type is IPv4 or IPv6, with a prefix length
of 32 or 128, respectively. I… | column | MPLS-TC-STD-MIBTeHopAddressType | .1.3.6.1.2.1.122.1.2.1.6 |
| teTunnelSourceAddress The Source Traffic Engineered Tunnel hop address of
this Tunnel.
The type of this address is determined by the value
of the corresponding teTunnelSourceAddressType.… | column | MPLS-TC-STD-MIBTeHopAddress | .1.3.6.1.2.1.122.1.2.1.7 |
| teTunnelDestinationAddressType The type of Traffic Engineered Tunnel hop address
for the destination of this Tunnel.
The value of this object cannot be changed
if the value of the corresponding t… | column | MPLS-TC-STD-MIBTeHopAddressType | .1.3.6.1.2.1.122.1.2.1.8 |
| teTunnelDestinationAddress The Destination Traffic Engineered Tunnel hop
address of this Tunnel.
The type of this address is determined by the value
of the corresponding teTunnelDestinationAd… | column | MPLS-TC-STD-MIBTeHopAddress | .1.3.6.1.2.1.122.1.2.1.9 |