fsSynceTraceOption

SyncE-MIB · .1.3.6.1.4.1.29601.2.79.1.1.2.1.2
MIB view Table view

Object

column r/w SNMPv2-SMIUnsigned32 
This variable governs the trace levels in the SyncE module.
              
A four byte integer is used for enabling the trace level.
Each bit in the four byte integer represents a particular
trace level.
The mapping between the bit positions & the trace level is
as follows:
  Bit 0 - Init and Shutdown traces
  Bit 1 - Management traces
  Bit 2 - Data Path traces [NOT REQUIRED IN SYNCE]
  Bit 3 - Control Plane traces
  Bit 4 - Packet Dump traces
  Bit 5 - Traces related to all resources except buffers
  Bit 6 - All Failure traces
  Bit 7 - Buffer allocation/release traces
              
  Bit 16 - SYNCE Function Entry traces
  Bit 17 - SYNCE Function Exit traces
  Bit 18 - SYNCE Critical traces
              
The remaining bits are unused. Combination of levels are
also allowed.
              
For example, if the bits 19 and 20 are set, then the trace
statement related to discovery and remote loopback related
messages will be printed.
              
The user has to enter the corresponding integer value for the
bits set. For example, if bits 8 and 9 are to be set, then user
has to give the value 0x300.

Context

MIB
SyncE-MIB
OID
.1.3.6.1.4.1.29601.2.79.1.1.2.1.2
Type
column
Access
readwrite
Status
current
Parent
fsSynceEntry
Table
fsSynceTable
Siblings
6

Syntax

SNMPv2-SMIUnsigned32
Source
SNMPv2-SMIUnsigned32
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
fsSynceContextId
This object is a unique context identifier for each entry. Each virtual context will be able to run SyncE protocol individually and will be distinguished by this object.
columnInteger32.1.3.6.1.4.1.10876.101.2.79.1.1.2.1.1
fsSynceQLMode
This object is used to configure QL Enable/Disable mode for the selection process in SyncE module. The default value of this object is Enabled. In the disabled state the quality l…
columnEnumeration.1.3.6.1.4.1.10876.101.2.79.1.1.2.1.3
fsSynceQLValue
This object contains the QL value selected through the clock selection process. The value of this object shall be used while transmitting the SSM packets. If this value is set by …
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.2.79.1.1.2.1.4
fsSynceSSMOptionMode
This object is used to select Option 1(Europe) or Option 2(America) clocks in SyncE.
columnEnumeration.1.3.6.1.4.1.10876.101.2.79.1.1.2.1.5
fsSynceSelectedInterface
This object represent the currently selected interface which QL value is being used for transmitting QL in SSM packets.
columnIF-MIBInterfaceIndex.1.3.6.1.4.1.10876.101.2.79.1.1.2.1.6
fsSynceContextRowStatus
Used for creation/deletion of enteries in the table
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.10876.101.2.79.1.1.2.1.7