fsSynceIfQLValue
SyncE-MIB ·
.1.3.6.1.4.1.29601.2.79.1.2.1.1.5
Object
column
r/w
Enumeration
This object contains the QL value for a SyncE interface. The value of this object is not considered in QL disabled mode. The default value on this object is DNU(5).
Context
- MIB
- SyncE-MIB
- OID
.1.3.6.1.4.1.29601.2.79.1.2.1.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- fsSynceIfEntry
- Table
- fsSynceIfTable
- Siblings
- 13
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | qlPRC |
2 | qlSSUA |
3 | qlSSUB |
4 | qlSEC |
5 | qlDNU |
6 | qlPRS |
7 | qlSTU |
8 | qlST2 |
9 | qlTNC |
10 | qlST3E |
11 | qlST3 |
12 | qlSMC |
13 | qlRES |
14 | qlPROV |
15 | qlDUS |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsSynceIfIndex Uniquely identifies an interface in the system. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.10876.101.2.79.1.2.1.1.1 |
| fsSynceIfPktsRx This object contains the total number of received SyncE packets on an
interface. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.2.79.1.2.1.1.10 |
| fsSynceIfPktsRxDropped This object contains the total number of dropped SyncE packets on an
interface. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.2.79.1.2.1.1.11 |
| fsSynceIfPktsRxErrored This object contains the total number of SyncE packets whose
processing(decoding) resulted into error. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.2.79.1.2.1.1.12 |
| fsSynceIfRowStatus Used for creation/deletion of enteries in the SyncE interface table | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.10876.101.2.79.1.2.1.1.13 |
| fsSynceIfConfigSwitch When ForcedSwitch is enabled on an interface, it can override the
currently selected synchronization source, provided the synchronization
source is enabled and not locked out. … | column | Enumeration | .1.3.6.1.4.1.29601.2.79.1.2.1.1.14 |
| fsSynceIfSynceMode This object controls enabling/disabling of Synchronous Ethernet
feature on an interface. In the disabled state, SyncE
packets will not considered for synchronizing the system cloc… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.79.1.2.1.1.2 |
| fsSynceIfEsmcMode This object represent the ESMC mode i.e. whether SSM is expected
to be received on this interface or SSM are to be tranmissted on this
interface.
rx : SSM is expected to be receiv… | column | Enumeration | .1.3.6.1.4.1.10876.101.2.79.1.2.1.1.3 |
| fsSynceIfPriority This object contains the priority value of an interface. It is used
by the selection algorithm in order to select the best QL value
among all the interfaces. In the disabled mode,… | column | Integer32 | .1.3.6.1.4.1.10876.101.2.79.1.2.1.1.4 |
| fsSynceIfIsRxQLForced This object will be true if operator manually assign the QL value to an
interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.79.1.2.1.1.6 |
| fsSynceIfLockoutStatus This object contains the lockout status for SyncE interface.
Lockout temporarily removes a timing source as available synchronization
source for the selection process.As defined i… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.79.1.2.1.1.7 |
| fsSynceIfSignalFail If the hold off timer expires and no SyncE packet was received till
then by the port then the status of the port changes to signal fail
status. As defined in ITU-T standard G.781 … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.79.1.2.1.1.8 |
| fsSynceIfPktsTx This object contains the total number of transmitted SyncE packets on
an interface. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.2.79.1.2.1.1.9 |