s3AgentEepromSize
SYNOPTICS-COMMON-MIB ·
.1.3.6.1.4.1.45.1.2.4.10
Object
scalar
mandatory
Integer32
The size of the EEPROM of the agent in units of bytes.
Context
- MIB
- SYNOPTICS-COMMON-MIB
- OID
.1.3.6.1.4.1.45.1.2.4.10- Type
- scalar
- Access
- readonly
- Status
- mandatory
- Parent
- s3AgentHw
- Siblings
- 13
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| s3AgentStatus mandatory This indicates whether the NMM is online(2) and
operating, or offline(1) (ie: not connected to the
concentrator backplane). | scalar | Enumeration | .1.3.6.1.4.1.45.1.2.4.1 |
| s3AgentEpromSize mandatory The size of the EPROM of the agent in units of bytes. | scalar | Integer32 | .1.3.6.1.4.1.45.1.2.4.11 |
| s3AgentDramSize mandatory The size of the DRAM of the agent in units of bytes. | scalar | Integer32 | .1.3.6.1.4.1.45.1.2.4.12 |
| s3AgentHexDisplay mandatory The current 4 ASCII character display of the agent.
Agents with no hex display hardware should return a
zero length string. | scalar | OctetString | .1.3.6.1.4.1.45.1.2.4.13 |
| s3AgentFlashStatus mandatory This indicates the operational status of the flash
device of the agent. A fail(3) indicates that either
the flash device configuration on board is not valid
or the flash EEPROMs … | scalar | Enumeration | .1.3.6.1.4.1.45.1.2.4.14 |
| s3AgentMdaHwVer mandatory The network management module's MDA hardware
version number (0=Rev. A, 1=Rev. B, etc.). | scalar | Integer32 | .1.3.6.1.4.1.45.1.2.4.2 |
| s3AgentMode mandatory This indicates whether the NMM is operating in
primary(1) or secondary(2) mode. | scalar | Enumeration | .1.3.6.1.4.1.45.1.2.4.3 |
| s3AgentReset mandatory Network management module reset status. Writing
a reset(2) to this object will reset the NMM and
perform a download and restart. | scalar | Enumeration | .1.3.6.1.4.1.45.1.2.4.4 |
| s3AgentRestart mandatory Network management module restart status.
Writing a restart(2) to this object will restart
the NMM. This initializes all the counters,
re-reads the EEPROM data structure and star… | scalar | Enumeration | .1.3.6.1.4.1.45.1.2.4.5 |
| s3AgentBootMode mandatory The method for obtaining boot parameter information.
The possible values are:
eeprom(1)......get boot info from eeprom
net(2).........get boot info from remote server
otherC… | scalar | Enumeration | .1.3.6.1.4.1.45.1.2.4.6 |
| s3AgentWriteEeprom mandatory Network management module EEPROM write status.
Writing a (2) to this object will write the contents
of current EEPROM data structure in the EEPROM. | scalar | Enumeration | .1.3.6.1.4.1.45.1.2.4.7 |
| s3AgentBaudRate mandatory Specifies the baud rate in bits per second of
either the internal modem or the RS-232 port.
This parameter will take effect only after a
restart (s3AgentRestart) is iss… | scalar | RFC1155-SMIGauge | .1.3.6.1.4.1.45.1.2.4.8 |
| s3AgentInitString mandatory This is the initialization string used to establish
the out-of-band connection. (i.e. could contain the
string ATDT,415-960-1100 for an internal or external
modem). This is used a… | scalar | OctetString | .1.3.6.1.4.1.45.1.2.4.9 |