ccRouteAddObj
SYMBOL-WS5000-MIB ·
.1.3.6.1.4.1.388.6.2.20
Object
scalar
r/w
OctetString
Add route to the network routing table.
Syntax:host <host addr> <gateway>
or
net <network addr> <gateway> netmask <netmask>
Context
- MIB
- SYMBOL-WS5000-MIB
- OID
.1.3.6.1.4.1.388.6.2.20- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- symbolCCInterfaces
- Siblings
- 21
Syntax
OctetString
Values & Constraints
Object Constraints
range: 1-200
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ccAPPolicyAddObj Add one AP Policy object into the AP Policy table. The Maximum length of the AP Policy
Name can be 50 characters, Note that the following characters cannot be part
of Policy Nam… | scalar | OctetString | .1.3.6.1.4.1.388.6.2.1 |
| ccAPTable The Table of AccessPorts. | table | - | .1.3.6.1.4.1.388.6.2.10 |
| ccAPPolicyTable APPolicy Table. | table | - | .1.3.6.1.4.1.388.6.2.11 |
| ccEPTable EtherPorts entries. | table | - | .1.3.6.1.4.1.388.6.2.12 |
| ccEPPTable A list of Ethernet port policy entries. | table | - | .1.3.6.1.4.1.388.6.2.13 |
| ccdot11FHPhyTable The table for FH specific configuration parameters | table | - | .1.3.6.1.4.1.388.6.2.14 |
| ccAPPolicyObjects | node | - | .1.3.6.1.4.1.388.6.2.16 |
| ccFWLANTable A list of LAN descriptors.
Note:This Feature is VPN dependent feature hence
if vpnsupport is not enabled then the walk over
this table will not return anything and the … | table | - | .1.3.6.1.4.1.388.6.2.17 |
| ccFWLANNATTable A list of LAN NAT Entries. This is a
dual-index table, NAT entries for all
LANs are displayed. A single entry of
0.0.0.0 for a LAN means that LAN has
no NAT entries.
… | table | - | .1.3.6.1.4.1.388.6.2.18 |
| ccRouteTable Display current network routing table. | table | - | .1.3.6.1.4.1.388.6.2.19 |
| ccAPPolicyRemObj Remove one AP Policy object from the AP Policy table. | scalar | OctetString | .1.3.6.1.4.1.388.6.2.2 |
| ccRouteRemObj Remove route from the network routing table.
Syntax:host <host addr> <gateway>
or
net <network addr> <gateway> netmask <netmask> | scalar | OctetString | .1.3.6.1.4.1.388.6.2.21 |
| ccRouteFlush Remove all routes from the network routing table.
when set to True | scalar | DoActionNow | .1.3.6.1.4.1.388.6.2.22 |
| ccDhcpSrvNIC1 | node | - | .1.3.6.1.4.1.388.6.2.23 |
| ccDhcpSrvNIC2 | node | - | .1.3.6.1.4.1.388.6.2.24 |
| ccEPPAddObj Add one Ethernet policy object into the EPP table. The Maximum length of the Ethernet Policy
Name can be 50 characters,Note that the following characters cannot be part of
Ethern… | scalar | OctetString | .1.3.6.1.4.1.388.6.2.3 |
| ccEPPRemObj Remove one Ethernet policy object from the EPP table. The Maximum length of the Ethernet Policy
Name can be 50 characters,Note that the following characters cannot be part of
Eth… | scalar | OctetString | .1.3.6.1.4.1.388.6.2.4 |
| ccAccessPortAddObj Add an access port. The input string should have the following syntax:
<dev_mac,dev_type,radio1_name,radio1_mac,radio2_name,radio2_mac>.
dev_mac is the mac address of t… | scalar | OctetString | .1.3.6.1.4.1.388.6.2.5 |
| ccAccessPortRemObj Remove an AccessPort
syntax :<port name>
When a ap200/ap300 Access port is removed both the radio
macs are removed. | scalar | OctetString | .1.3.6.1.4.1.388.6.2.6 |
| ccFWLanAddObj Add a LAN to the system. | scalar | OctetString | .1.3.6.1.4.1.388.6.2.7 |
| ccFWLanRemObj Remove the LAN from the system. | scalar | OctetString | .1.3.6.1.4.1.388.6.2.8 |