ccRadioMAC
SYMBOL-WS5000-MIB ·
.1.3.6.1.4.1.388.6.2.10.1.32
Object
column
RFC1213-MIBDisplayString
The MAC address of this radio.
Context
- MIB
- SYMBOL-WS5000-MIB
- OID
.1.3.6.1.4.1.388.6.2.10.1.32- Type
- column
- Access
- readonly
- Status
- current
- Parent
- ccAPEntry
- Table
- ccAPTable
- Siblings
- 44
Syntax
RFC1213-MIBDisplayString
- Source
- RFC1213-MIBDisplayString
- Base type
OctetString
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ccRadioIndex The Index for the Access port. | column | Integer32 | .1.3.6.1.4.1.388.6.2.10.1.28 |
| ccRadioName The Name of the Access port. The Maximum length of the Radio Name
can be 50 characters. Note that the following characters cannot be part
of Radio Name field - ',.,\,&, # and do… | column | OctetString | .1.3.6.1.4.1.388.6.2.10.1.29 |
| ccRadioDesc The description of the Access port. The Maximum length of the description
can be 128 characters. Note that the following characters cannot be part
of description - ',# and doubl… | column | OctetString | .1.3.6.1.4.1.388.6.2.10.1.30 |
| ccRadioOnlineStatus Online status for this Access port.
0(zero) means 'unavailable' or non-existent.
1 means 'active',, i.e. functional
2 means 'inactive',existent but not functional.
3 means 'alert… | column | APOnlineStatus | .1.3.6.1.4.1.388.6.2.10.1.31 |
| ccDeviceMAC The MAC address of the device to which this radio belongs. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.388.6.2.10.1.33 |
| ccDeviceLocation The location of this device. | column | OctetString | .1.3.6.1.4.1.388.6.2.10.1.34 |
| ccRadioType The type of this radio. 'A' or 'B' denote 802.11a and 802.11b respectively.
'FH' denotes an FH radio. | column | OctetString | .1.3.6.1.4.1.388.6.2.10.1.35 |
| ccRadioChannel The channel on which this radio is operating.
Valid values for 11a are:34,36,38,40...64.
Valid values for 11b are:1,2,3,...14.
Also, 'auto-once' is a valid channel if you want sw… | column | OctetString | .1.3.6.1.4.1.388.6.2.10.1.36 |
| ccRadioPower deprecated The power on which this radio is operating.
Valid values for both 11a and 11b are :1,5,15,30,Full. | column | OctetString | .1.3.6.1.4.1.388.6.2.10.1.37 |
| ccRadioPolicy The policy governing this radio.
To clear the existing policy, leave the input blank. | column | OctetString | .1.3.6.1.4.1.388.6.2.10.1.38 |
| ccDeviceNic The NIC number on which this device is connected to the WS5000 wireless Switch.
Valid Values are 1 or 2 | column | Integer32 | .1.3.6.1.4.1.388.6.2.10.1.39 |
| ccDeviceType The type of the device. Expect either of 'AP200','AP100','AP300','AP4121','AP3020/3021' as the value. | column | OctetString | .1.3.6.1.4.1.388.6.2.10.1.40 |
| ccRadioCCAmode The CCA Mode for the Access port. | column | Integer32 | .1.3.6.1.4.1.388.6.2.10.1.41 |
| ccRadioCCAthresh The CCA threshold for the Access port. | column | Integer32 | .1.3.6.1.4.1.388.6.2.10.1.42 |
| ccRadioDiversity The antenna setting for the Access Port.
Valid values are 0,1 and 2. 0 indicates Full, 1 indicates primary,
and 2 indicates secondary. | column | Integer32 | .1.3.6.1.4.1.388.6.2.10.1.43 |
| ccDeviceVlanid The VLAN id for the Access port. | column | Integer32 | .1.3.6.1.4.1.388.6.2.10.1.44 |
| ccDeviceVlanTagsSeen The Vlan Tags seen by this device. | column | OctetString | .1.3.6.1.4.1.388.6.2.10.1.45 |
| ccRadioUptime The time for which this radio has been up. | column | OctetString | .1.3.6.1.4.1.388.6.2.10.1.46 |
| ccRadioTxpps The number of packets transmitted per second between AP and MU. | column | Integer32 | .1.3.6.1.4.1.388.6.2.10.1.47 |
| ccRadioMUs The number of MUs associated with this radio. | column | Integer32 | .1.3.6.1.4.1.388.6.2.10.1.48 |
| ccRadioGatherStatistics true(1)/false(2) to turn on/off the functionality of gathering AP
statistic data. | column | TruthValue | .1.3.6.1.4.1.388.6.2.10.1.49 |
| ccRadioReset A 'true' as input will reset the Radio.
'false' is not an acceptable input.
Note that a Reset message can be sent out only if
the radio is in 'active' state.
This object is SET-… | column | TruthValue | .1.3.6.1.4.1.388.6.2.10.1.50 |
| ccDeviceClearSeenVlanTags deprecated true(1) will clear the seen Vlans | column | TruthValue | .1.3.6.1.4.1.388.6.2.10.1.51 |
| ccDeviceReset A 'true' as input will reset the Device.
'false' is not an acceptable input.
This object is SET-only. | column | TruthValue | .1.3.6.1.4.1.388.6.2.10.1.52 |
| ccRadioAuto deprecated 'true' enables ACS-on-adoption for this
particular radio.'false' disables it. | column | TruthValue | .1.3.6.1.4.1.388.6.2.10.1.53 |
| ccRadioMUPower deprecated The power value to be put in the beacon of this radio.
Valid values are : 1,5,15,30,Full,default.
Note that 'default' as input causes the beacon to have the
same power level as t… | column | OctetString | .1.3.6.1.4.1.388.6.2.10.1.54 |
| ccRadioProtection Defines whether 'Protection' is On or Off. | column | OctetString | .1.3.6.1.4.1.388.6.2.10.1.55 |
| ccRadioShortSlot Defines whether Short Slot is On or Off. | column | OctetString | .1.3.6.1.4.1.388.6.2.10.1.56 |
| ccRadioAntenna Defines whether antenna type is internal, external or unknown. | column | OctetString | .1.3.6.1.4.1.388.6.2.10.1.57 |
| ccRadioCurrentChannel Current channel. | column | OctetString | .1.3.6.1.4.1.388.6.2.10.1.58 |
| ccRadioAllChannels A comma seperated list of all channels valid for this radio. | column | OctetString | .1.3.6.1.4.1.388.6.2.10.1.59 |
| ccRadioPowerdBm The power on which the radio is configured to operate in dBm.
Valid range depends on the country and radio configuration.
It is as defined in the 'ccRadioAllPower' object. | column | OctetString | .1.3.6.1.4.1.388.6.2.10.1.60 |
| ccRadioCurrentPower The power on which the radio is currently operating in dBm. | column | OctetString | .1.3.6.1.4.1.388.6.2.10.1.61 |
| ccRadioAllPower The valid power range for the radio in the format 'min_power-max_power'. | column | OctetString | .1.3.6.1.4.1.388.6.2.10.1.62 |
| ccRadioMUPowerdBm Power level adjustment for MU. The valid range is -20 to 20 dB. | column | OctetString | .1.3.6.1.4.1.388.6.2.10.1.63 |
| ccRadioAntCorrection Antenna correction factor. The valid range is -20 to 20dBi.
Note:This OID is supported only for AP300 device
with external antenna | column | Integer32 | .1.3.6.1.4.1.388.6.2.10.1.64 |
| ccRadioIndoor Radio location indoor or outdoor. Valid values are 'in' or 'out'.
Note:This OID is supported only for AP300 device
with external antenna | column | OctetString | .1.3.6.1.4.1.388.6.2.10.1.65 |
| ccRadioDFS DFS status. Valid values are:off,on,active,channel scan.
Supported only for 11a radio. | column | OctetString | .1.3.6.1.4.1.388.6.2.10.1.66 |
| ccRadioTPC TPC status. Valid values are: off,on.
Supported only for 11a radio. | column | OctetString | .1.3.6.1.4.1.388.6.2.10.1.67 |
| ccRadioRadarChannels A comma seperated list of all channels with timestamps where radar was detected. | column | OctetString | .1.3.6.1.4.1.388.6.2.10.1.68 |
| ccDetectorAp If this is enabled, the switch uses this AP to
detect Rogue APs. | column | TruthValue | .1.3.6.1.4.1.388.6.2.10.1.69 |
| ccRadioMaxMUs The number of maximum MUs for the Access port | column | Integer32 | .1.3.6.1.4.1.388.6.2.10.1.70 |
| ccSimulateRadar True(1) value will set simulateradar.
Setting it true sets the Dwell time value.
Note: A get over it always return idealState(2) and
this OID is supporte… | column | DoActionNow | .1.3.6.1.4.1.388.6.2.10.1.71 |
| ccRadioUser802x Set the 802.1x user name and password
Syntax: <user name>,<password>
Note: This OID is supported only for AP300 device type
The maximum length of user and passwo… | column | OctetString | .1.3.6.1.4.1.388.6.2.10.1.72 |