ccLicenseCount

SYMBOL-WS5000-MIB · .1.3.6.1.4.1.388.6.1.1.23
MIB view Table view

Object

scalar SNMPv2-SMIInteger32 
The number of licenses issued to the WS-5000 Wireless Switch. (the number of AP that 
the switch can adopt at the current state)
          
Note: The number of AP that the system can adopt depends on the state of the 
Switch.
           
When it is a StandBy and disabled, it will return 0. If it is StandBy and enabled, 
it will either return 0 (if not connected to a Primary), or the number of AP of its Primary.

Context

MIB
SYMBOL-WS5000-MIB
OID
.1.3.6.1.4.1.388.6.1.1.23
Type
scalar
Access
readonly
Status
current
Parent
ccSysCfg
Siblings
33

Syntax

SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
ccModuleName
The name of the Wireless Switch. Changing the switch name will require the KDC configuration to be recreated if it is currently configured. Note that the following charact…
scalarOctetString.1.3.6.1.4.1.388.6.1.1.1
ccSnmpOpers
This object should be one of the following value: 0 - Soft Kill == Save the current changes in the agent and terminate the agent. 1 - Hard Kill == Just terminate …
scalarSnmpOpers.1.3.6.1.4.1.388.6.1.1.10
ccUptime
The time since when the Wireless Switch has been up.
scalarOctetString.1.3.6.1.4.1.388.6.1.1.11
ccFTP
The status of FTP in the Wireless Switch. True implies that FTP is on.
scalarTruthValue.1.3.6.1.4.1.388.6.1.1.12
ccTelnet
The status of Telnet in the Wireless Switch. True implies that Telnet is on.
scalarTruthValue.1.3.6.1.4.1.388.6.1.1.13
ccWeb
Returns 'http' or 'https' depending on whether SSL is being used by the web server or not.
scalarOctetString.1.3.6.1.4.1.388.6.1.1.14
ccSNMPFlag
A 'true' as input forces the Wireless Switch to re-read the SNMP Trap configuration. 'false' is not an acceptable input. This object is SET-only.
scalarTruthValue.1.3.6.1.4.1.388.6.1.1.15
ccTime
Set CC time and timezone. Here's the format: 'yyyy/mm/dd hh:mm:dd timezone daylight', where, yyyy = 4 digit of year mm = 2 digit of month [1-12] dd = 2 digit of date [1-31] hh …
scalarOctetString.1.3.6.1.4.1.388.6.1.1.16
ccSNMPKdc
Regardless of the input value, always to disable Snmp KDC feature. After disabling the KDC feature, there is no data returned from the OID tree <ccOnBoardKerberos>. The agent will…
scalarTruthValue.1.3.6.1.4.1.388.6.1.1.17
ccCliKdc
Regardless of the input value, always to disable CLI Kdc feature.
scalarTruthValue.1.3.6.1.4.1.388.6.1.1.18
ccPolicyAddObj
Add one Wireless Switch Policy for this Wireless Switch object. The maximum number of characters allowed is 50, and the following characters cannot be part of the input string -…
scalarOctetString.1.3.6.1.4.1.388.6.1.1.19
ccModuleDesc
A description of the Wireless Switch module. Ex. <Butterfly@Symbol Technologies>
scalarOctetString.1.3.6.1.4.1.388.6.1.1.2
ccPolicyRemObj
Remove one Wireless Switch Policy for this Wireless Switch object. The maximum number of characters allowed is 50, and the following characters cannot be part of the input string…
scalarOctetString.1.3.6.1.4.1.388.6.1.1.20
ccEmergencyPolicy
The policy which will become the emergency active policy for the switch. In order to undefine an emergency policy, leave the input blank while SETting this variable.
scalarOctetString.1.3.6.1.4.1.388.6.1.1.24
ccEmergencyMode
'true' activates the emergency mode. Which means that the switch will immediately start working under the emergency policy if 'true' is sent. 'false' will deactivate the emergency…
scalarTruthValue.1.3.6.1.4.1.388.6.1.1.25
ccRunACS
Setting it to 'true' will run Automatic Channel Selection. 'false' is not an acceptable input. This object is SET-only.
scalarTruthValue.1.3.6.1.4.1.388.6.1.1.26
ccEnableSNMPTrap
Enable/Disable the trap functionality in the switch. 'true' enables it, 'false' disables it
scalarTruthValue.1.3.6.1.4.1.388.6.1.1.27
ccEnableWVPNSupport
Enable(1)/Disable(2) WVPN Support. This will reboot the switch and subsequent reboots will have WVPN enabled at startup. Enable(1)/Disable(2) WVPN Support. syntax <1> o…
scalarOctetString.1.3.6.1.4.1.388.6.1.1.28
ccEnableRap
Enable the Rogue AP feature on the switch. To begin RogueAP detection, ccDetectorAP has to be enabled for an active AP.
scalarTruthValue.1.3.6.1.4.1.388.6.1.1.29
ccManufacture
The manufacturer of the Wireless Switch.
scalarOctetString.1.3.6.1.4.1.388.6.1.1.3
ccAPTxPPS
Display packets transmitted per sec by all APs adapted to WS.
scalarInteger32.1.3.6.1.4.1.388.6.1.1.30
ccAPRxPPS
Display packets received per sec by all APs adopted to WS
scalarInteger32.1.3.6.1.4.1.388.6.1.1.31
ccAvgTxRetry
Display transmit retry packets by all AP's adopted to WS
scalarInteger32.1.3.6.1.4.1.388.6.1.1.32
ccAvgRSSI
Display avg Receive Signal Strength Indicator(RSSI) for the WS.
scalarInteger32.1.3.6.1.4.1.388.6.1.1.33
ccAvgSNR
Display average Signal to Noise Ratio (SNR) for WS.
scalarInteger32.1.3.6.1.4.1.388.6.1.1.34
ccCopyright
The Copyright information about the Wireless Switch.
scalarOctetString.1.3.6.1.4.1.388.6.1.1.4
ccConfigChangeLast
Description. Last Configuration Changed.
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.388.6.1.1.49
ccModuleVer
The software version for this model.
scalarOctetString.1.3.6.1.4.1.388.6.1.1.5
ccMaxNumAP
The maximum number of Access Ports supported by the Wireless Switch.
scalarInteger32.1.3.6.1.4.1.388.6.1.1.6
ccNTPnode-.1.3.6.1.4.1.388.6.1.1.60
ccMaxNumMu
The maxium number of Mobile Unit supported by the Wireless Switch.
scalarInteger32.1.3.6.1.4.1.388.6.1.1.7
ccActivePolicy
The current Wireless Switch policy for this model.
scalarOctetString.1.3.6.1.4.1.388.6.1.1.8
ccTaf
The object is for running TAF executable. Ex. 1. 'addgw $1 $2' addgw: Add a new gateway into the system routing table. $1: new gateway IP $2: IP family …
scalarOctetString.1.3.6.1.4.1.388.6.1.1.9