agentPortDefaultType

SWITCHING-MIB · .1.3.6.1.4.1.7244.2.1.2.13.1.11
MIB view Table view

Object

column r/w ObjectIdentifier 
This object identifies the default administrative port type,
to be used in conjunction with the operational port type
denoted by agentPortType.
              
The set of possible values for this object is
the same as the set defined for the agentPortType
object.
              
This object represents the administratively-configured type of
the MAU.  If auto-negotiation is not enabled or is not
implemented for this MAU, the value of this object determines
the operational type of the MAU.  In this case, a set to this
object will force the MAU into the specified operating mode.
              
If auto-negotiation is implemented and enabled for this MAU,
the operational type of the MAU is determined by auto-negotiation,
and the value of this object denotes the type to which the MAU
will automatically revert if/when auto-negotiation is later disabled.
              
The valid values for this object are:
              
     dot3MauType10BaseTHD
     dot3MauType10BaseTFD
     dot3MauType100BaseTXHD
     dot3MauType100BaseTXFD
     dot3MauType100BaseFXFD
     dot3MauType1000BaseSXFD
     dot3MauType10GBaseLW
			   dot3MauType1000BaseXFD
     dot3MauType10GigBaseX

Context

MIB
SWITCHING-MIB
OID
.1.3.6.1.4.1.7244.2.1.2.13.1.11
Type
column
Access
readwrite
Status
current
Parent
agentPortConfigEntry
Table
agentPortConfigTable
Siblings
26

Syntax

ObjectIdentifier

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
agentPortDot1dBasePort
The port number of this port.
columnInteger32.1.3.6.1.4.1.7244.2.1.2.13.1.1
agentPortClearStats
clear stats for this port only
columnEnumeration.1.3.6.1.4.1.7244.2.1.2.13.1.10
agentPortType
This object identifies the port type. An initial set of MAU types are defined in RFC 2668. The assignment of OBJECT IDENTIFIERs to new types of MAUs is managed by the IANA. If …
columnObjectIdentifier.1.3.6.1.4.1.7244.2.1.2.13.1.12
agentPortAutoNegAdminStatus
This object identifies the administration status of auto negotiation for this port. Note: Fiber port is read-only
columnEnumeration.1.3.6.1.4.1.7244.2.1.2.13.1.13
agentPortMaxFrameSizeLimit
This object identifies the largest value that can be configured for agentPortMaxFrameSize
columnInteger32.1.3.6.1.4.1.7244.2.1.2.13.1.18
agentPortMaxFrameSize
This object identifies the currently configured maximum frame size value for this port. The maximmum value that this object can be set to is the value of agentPortMaxFrameSizeLimi…
columnInteger32.1.3.6.1.4.1.7244.2.1.2.13.1.19
agentPortIfIndex
The switch's Port IfIndex
columnInteger32.1.3.6.1.4.1.7244.2.1.2.13.1.2
agentPortCapability
port capability which means(2^bit) are: don't care(0), 10half(2), 10full(4), 100half(8), 100full(16), 1000half(32), 1000full(64), 10Gfull(128), sfp(256), internal(4096), 40Gfull(5…
columnInteger32.1.3.6.1.4.1.7244.2.1.2.13.1.26
agentPortBroadcastControlThresholdUnit
Configures the units of the threshold value to percentage of port speed or absolute packets per second.
columnEnumeration.1.3.6.1.4.1.7244.2.1.2.13.1.27
agentPortMulticastControlThresholdUnit
Configures the units of the threshold value to percentage of port speed or absolute packets per second.
columnEnumeration.1.3.6.1.4.1.7244.2.1.2.13.1.28
agentPortUnicastControlThresholdUnit
Configures the units of the threshold value to percentage of port speed or absolute packets per second.
columnEnumeration.1.3.6.1.4.1.7244.2.1.2.13.1.29
agentPortIanaType
The switch's Port Type
columnIANAifType-MIBIANAifType.1.3.6.1.4.1.7244.2.1.2.13.1.3
agentPortVoiceVlanMode
Describes and Configures the Port Voice VLAN Mode. This object can only be set to disable(5).
columnEnumeration.1.3.6.1.4.1.7244.2.1.2.13.1.30
agentPortVoiceVlanID
Describes and Configures the Port Voice VLAN ID if the Voice Vlan Mode is Vlan ID.
columnInteger32.1.3.6.1.4.1.7244.2.1.2.13.1.31
agentPortVoiceVlanPriority
Describes and Configures the Port Voice VLAN Priority if the Voice Vlan Mode is dot1p. A value of 255 indicates that the priority is not configured.
columnInteger32.1.3.6.1.4.1.7244.2.1.2.13.1.32
agentPortVoiceVlanDataPriorityMode
Describes and Configures the Port Voice VLAN Data Priority Mode.
columnEnumeration.1.3.6.1.4.1.7244.2.1.2.13.1.33
agentPortVoiceVlanOperationalStatus
Describes the Port Voice VLAN Operational Status.
columnEnumeration.1.3.6.1.4.1.7244.2.1.2.13.1.34
agentPortVoiceVlanUntagged
Describes and Configures the Port Voice VLAN tagging mode.
columnEnumeration.1.3.6.1.4.1.7244.2.1.2.13.1.35
agentPortVoiceVlanNoneMode
Describes and Configures the Port Voice VLAN None mode.
columnEnumeration.1.3.6.1.4.1.7244.2.1.2.13.1.36
agentPortVoiceVlanAuthMode
Describes and Configures the Port Voice VLAN Authentication mode. Disable means authentication not required for voice devices when dot1x is enabled.
columnEnumeration.1.3.6.1.4.1.7244.2.1.2.13.1.38
agentPortDot3FlowControlOperStatus
This object identifies operational status of the flow control per port.
columnEnumeration.1.3.6.1.4.1.7244.2.1.2.13.1.39
agentPortSTPMode deprecated
The switch's Port Spanning Tree Protocol Mode STP mode values are: dot1d (the default) fast, indicates you want to use the fast spanning tree mode off, indicates th…
columnEnumeration.1.3.6.1.4.1.7244.2.1.2.13.1.4
agentPortLoadStatsInterval
The length of time for which data is used to compute load statistics. The value is given in seconds, and must be a multiple of 30. The allowable range is 30 to 600 seconds.
columnInteger32.1.3.6.1.4.1.7244.2.1.2.13.1.40
agentPortSTPState deprecated
The switch's Port Spanning Tree Protocol State. This object is only supported when the Dot1d Protocol is enabled.
columnEnumeration.1.3.6.1.4.1.7244.2.1.2.13.1.5
agentPortAdminMode
The switch's Port Admin Mode
columnEnumeration.1.3.6.1.4.1.7244.2.1.2.13.1.6
agentPortLinkTrapMode
If enabled, link up and link down traps will be sent for this port.
columnEnumeration.1.3.6.1.4.1.7244.2.1.2.13.1.9