raisecomSyncePreviousSourceQl
SWITCH-SYNCE-MIB ·
.1.3.6.1.4.1.8886.1.20.2.1.11
Object
scalar
Integer32
Synce previous source quality level, including(EEC-OPTION 1): 0x0010--primary reference clock defined in ITU-T G.811 0x0100--type 1 or 5 SSU clock defined in ITU-T G.812 0x1000--type 6 SSU clock defined in ITU-T G.812 0x1011--synchronous ethernet clock defined in ITU-T G.8262 0x1111--means that the signal shall not be used for synchronization The value is smaller while the priority is higher.
Context
- MIB
- SWITCH-SYNCE-MIB
- OID
.1.3.6.1.4.1.8886.1.20.2.1.11- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- raisecomSynceGlobalGroup
- Siblings
- 13
Syntax
Integer32
Values & Constraints
Object Constraints
range: -1-15
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| raisecomSynceEnable Indicates whether the syncE feature is enabled on the device.
Enable(1) means that the syncE feature is enabled on this device.
Disable(2) means that the syncE feature is disabled. | scalar | SWITCH-TCEnableVar | .1.3.6.1.4.1.8886.1.20.2.1.1 |
| raisecomSyncePreviousSourceIndex Synce current source index
(32 bits, unit/slot/porttype/portnum):
0-10:port number index based 1
11-15:port type
The value of 00000 indicates this is a Local source
The value of 0… | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8886.1.20.2.1.10 |
| raisecomSynceStatisticClear Clear synce current statistic result if true. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.8886.1.20.2.1.12 |
| raisecomSynceClearBothSwitch Clear synce manual and forced switch if true. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.8886.1.20.2.1.13 |
| raisecomSynceHoldOffTime Synce source hold off time. | scalar | Unsigned32 | .1.3.6.1.4.1.8886.1.20.2.1.14 |
| raisecomSynceEEC1Mode Quality level degradation to eec1 mode selection. | scalar | Enumeration | .1.3.6.1.4.1.8886.1.20.2.1.15 |
| raisecomSynceRevertiveMode Indicates whether the syncE is working at revertive mode.
Enable(1) means that the syncE is working at revertive mode.
Disable(2) means that the syncE is working at non-revertive … | scalar | SWITCH-TCEnableVar | .1.3.6.1.4.1.8886.1.20.2.1.3 |
| raisecomSynceTrapEnable Indicates whether the syncE trap should be generated.
Enable(1) means that the syncE trap should be generated.
Disable(2) means that the syncE trap should not be generated. | scalar | SWITCH-TCEnableVar | .1.3.6.1.4.1.8886.1.20.2.1.4 |
| raisecomSynceCurrentState Synce current state, including:
freerunning--initial state, select local oscillator as clock source
holdover--current clock source is failed and no other source is available, keep… | scalar | Enumeration | .1.3.6.1.4.1.8886.1.20.2.1.5 |
| raisecomSynceLatestSwitchTime The latest clock source switched time. | scalar | RAISECOM-NTP-MIBNTPTimeStamp | .1.3.6.1.4.1.8886.1.20.2.1.6 |
| raisecomSynceWaitToRestore Synce source wait-to-restore time. | scalar | Unsigned32 | .1.3.6.1.4.1.8886.1.20.2.1.7 |
| raisecomSynceCurrentSourceIndex Synce current source index(32 bits, unit/slot/porttype/portnum):
0-10:port number index based 1
11-15:port type
The value of 00000 indicates this is a Local source
The value of 00… | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8886.1.20.2.1.8 |
| raisecomSynceCurrentSourceQl Synce current source quality level, including(EEC-OPTION 1):
0x0010--primary reference clock defined in ITU-T G.811
0x0100--type 1 or 5 SSU clock defined in ITU-T G.812
0x1000--ty… | scalar | Integer32 | .1.3.6.1.4.1.8886.1.20.2.1.9 |